Shlomo Efrima

Bio: Shlomo Efrima is an academic researcher from Ben-Gurion University of the Negev. The author has contributed to research in topics: Raman spectroscopy & Colloid. The author has an hindex of 32, co-authored 76 publications receiving 3029 citations. Previous affiliations of Shlomo Efrima include University of California, Santa Barbara.

Synthesis of high-quality metal sulfide nanoparticles from alkyl xanthate single precursors in alkylamine solvents

Abstract: A synthesis of various metal sulfide nanoparticles at relatively low temperature with use of a single precursor under ambient conditions is described. Metal alkyl xanthates (as well as thiocarbamates and thiocarbonates) are used as the precursor. Lewis base alkylamine solvents promote the reaction at low temperatures (from below room temperature up to ∼150 °C). By this method we form crystalline particles which are size- and shape-tunable and are usually monodiserse. This tunability is achieved by controlling parameters such as the reaction temperature, the reaction time, the concentration of the precursor, and the alkyl chain length. Core/shell structures are synthesized with the same method, using the same precursors, applying either a single-step or a dual-step process. CdS spherical particles, for instance, exhibit a narrow (∼30 nm fwhm) tunable excitonic fluorescence, and a broad, long wavelength defect emission, which intensity can be adjusted in a controlled manner, and even totally eliminated. Qua...

Silver Nanoparticles Capped by Long-Chain Unsaturated Carboxylates

Abstract: We study the preparation and capping of silver nanoparticles by several unsaturated long-chain carboxylates UV−visible and FTIR spectroscopy and high-resolution electron microscopy are used to characterize the effect of the chain length, its configuration, and the degree of unsaturation on the size distribution of the nanoparticles Langmuir layers and Langmuir−Blodgett films are used to study the adsorption of these carboxylates on the particles We find that unsaturated carboxylates in the cis configuration are useful stabilizers for the control of particle size and its surface properties

Single-Precursor, One-Pot Versatile Synthesis under near Ambient Conditions of Tunable, Single and Dual Band Fluorescing Metal Sulfide Nanoparticles

Abstract: We present a simple and versatile method for the synthesis of high-quality size-controlled metal sulfide nanoparticles. A single compound (metal xanthate) is the precursor. A Lewis-base solvent is used to achieve a low reaction temperature of 50-150 degrees C, usually in air. Demonstrated with CdS, the precise control over the particle size (by regulating the temperature or the concentration) enables tuning the absorption and emission spectra of the particles. We also can control the relative intensity of the narrow (30-35 nm wide) excitonic emission (tunable in the range 430-480 nm with approximately 2% fluorescence quantum efficiency) and the broad emission associated with deep surface traps (in the range 550-700 nm). Using the same precursor CdS/ZnS core/shell particles are produced with a high PL yield ( approximately 14%).

Classical theory of light scattering by an adsorbed molecule. I. Theory

Abstract: We develop a classical theory for the intensity and the depolarization ratio of the light scattered (Raman or Rayleigh) by an absorbed molecule. It is assumed that the optical properties of the system can be described by the polarizability of the molecule and the dielectric constant of the two media. The presence of the surface modifies the field incident upon the molecule as well as the field emitted by the induced dipole. We compute these effects, exactly, by using a dyadic Green’s function method, and approximately, by using a perfect mirror model. The theory provides the angular distribution of the scattered radiation, and its polarization as a function of the polarization, the frequency and the direction of incidence of the incoming radiation, as well as of the dielectric properties of the metal and the position of the molecule with respect to the surface. We use these equations to analyze the possible sources for the experimentally observed enhancement of the scattering caused by the presence of the metallic surface.

Gold nanoparticles: assembly, supramolecular chemistry, quantum-size-related properties, and applications toward biology, catalysis, and nanotechnology.

Abstract: Although gold is the subject of one of the most ancient themes of investigation in science, its renaissance now leads to an exponentially increasing number of publications, especially in the context of emerging nanoscience and nanotechnology with nanoparticles and self-assembled monolayers (SAMs). We will limit the present review to gold nanoparticles (AuNPs), also called gold colloids. AuNPs are the most stable metal nanoparticles, and they present fascinating aspects such as their assembly of multiple types involving materials science, the behavior of the individual particles, size-related electronic, magnetic and optical properties (quantum size effect), and their applications to catalysis and biology. Their promises are in these fields as well as in the bottom-up approach of nanotechnology, and they will be key materials and building block in the 21st century. Whereas the extraction of gold started in the 5th millennium B.C. near Varna (Bulgaria) and reached 10 tons per year in Egypt around 1200-1300 B.C. when the marvelous statue of Touthankamon was constructed, it is probable that “soluble” gold appeared around the 5th or 4th century B.C. in Egypt and China. In antiquity, materials were used in an ecological sense for both aesthetic and curative purposes. Colloidal gold was used to make ruby glass 293 Chem. Rev. 2004, 104, 293−346

Surface-enhanced spectroscopy

Abstract: In 1978 it was discovered, largely through the work of Fleischmann, Van Duyne, Creighton, and their coworkers that molecules adsorbed on specially prepared silver surfaces produce a Raman spectrum that is at times a millionfold more intense than expected. This effect was dubbed surface-enhanced Raman scattering (SERS). Since then the effect has been demonstrated with many molecules and with a number of metals, including Cu, Ag, Au, Li, Na, K, In, Pt, and Rh. In addition, related phenomena such as surface-enhanced second-harmonic generation, four-wave mixing, absorption, and fluorescence have been observed. Although not all fine points of the enhancement mechanism have been clarified, the majority view is that the largest contributor to the intensity amplification results from the electric field enhancement that occurs in the vicinity of small, interacting metal particles that are illuminated with light resonant or near resonant with the localized surface-plasmon frequency of the metal structure. Small in this context is gauged in relation to the wavelength of light. The special preparations required to produce the effect, which include among other techniques electrochemical oxidation-reduction cycling, deposition of metal on very cold substrates, and the generation of metal-island films and colloids, is now understood to be necessary as a means of producing surfaces with appropriate electromagnetic resonances that may couple to electromagnetic fields either by generating rough films (as in the case of the former two examples) or by placing small metal particles in close proximity to one another (as in the case of the latter two). For molecules chemisorbed on SERS-active surface there exists a "chemical enhancement" in addition to the electromagnetic effect. Although difficult to measure accurately, the magnitude of this effect rarely exceeds a factor of 10 and is best thought to arise from the modification of the Raman polarizability tensor of the adsorbate resulting from the formation of a complex between the adsorbate and the metal. Rather than an enhancement mechanism, the chemical effect is more logically to be regarded as a change in the nature and identity of the adsorbate.

Gold nanoparticles in chemical and biological sensing.

Abstract: Detection of chemical and biological agents plays a fundamental role in biomedical, forensic and environmental sciences1–4 as well as in anti bioterrorism applications.5–7 The development of highly sensitive, cost effective, miniature sensors is therefore in high demand which requires advanced technology coupled with fundamental knowledge in chemistry, biology and material sciences.8–13 In general, sensors feature two functional components: a recognition element to provide selective/specific binding with the target analytes and a transducer component for signaling the binding event. An efficient sensor relies heavily on these two essential components for the recognition process in terms of response time, signal to noise (S/N) ratio, selectivity and limits of detection (LOD).14,15 Therefore, designing sensors with higher efficacy depends on the development of novel materials to improve both the recognition and transduction processes. Nanomaterials feature unique physicochemical properties that can be of great utility in creating new recognition and transduction processes for chemical and biological sensors15–27 as well as improving the S/N ratio by miniaturization of the sensor elements.28 Gold nanoparticles (AuNPs) possess distinct physical and chemical attributes that make them excellent scaffolds for the fabrication of novel chemical and biological sensors (Figure 1).29–36 First, AuNPs can be synthesized in a straightforward manner and can be made highly stable. Second, they possess unique optoelectronic properties. Third, they provide high surface-to-volume ratio with excellent biocompatibility using appropriate ligands.30 Fourth, these properties of AuNPs can be readily tuned varying their size, shape and the surrounding chemical environment. For example, the binding event between recognition element and the analyte can alter physicochemical properties of transducer AuNPs, such as plasmon resonance absorption, conductivity, redox behavior, etc. that in turn can generate a detectable response signal. Finally, AuNPs offer a suitable platform for multi-functionalization with a wide range of organic or biological ligands for the selective binding and detection of small molecules and biological targets.30–32,36 Each of these attributes of AuNPs has allowed researchers to develop novel sensing strategies with improved sensitivity, stability and selectivity. In the last decade of research, the advent of AuNP as a sensory element provided us a broad spectrum of innovative approaches for the detection of metal ions, small molecules, proteins, nucleic acids, malignant cells, etc. in a rapid and efficient manner.37 Figure 1 Physical properties of AuNPs and schematic illustration of an AuNP-based detection system. In this current review, we have highlighted the several synthetic routes and properties of AuNPs that make them excellent probes for different sensing strategies. Furthermore, we will discuss various sensing strategies and major advances in the last two decades of research utilizing AuNPs in the detection of variety of target analytes including metal ions, organic molecules, proteins, nucleic acids, and microorganisms.

Charge transport in organic semiconductors.

Abstract: 2.2. Materials 929 2.3. Factors Influencing Charge Mobility 931 2.3.1. Molecular Packing 931 2.3.2. Disorder 932 2.3.3. Temperature 933 2.3.4. Electric Field 934 2.3.5. Impurities 934 2.3.6. Pressure 934 2.3.7. Charge-Carrier Density 934 2.3.8. Size/molecular Weight 935 3. The Charge-Transport Parameters 935 3.1. Electronic Coupling 936 3.1.1. The Energy-Splitting-in-Dimer Method 936 3.1.2. The Orthogonality Issue 937 3.1.3. Impact of the Site Energy 937 3.1.4. Electronic Coupling in Oligoacene Derivatives 938

Particles as surfactants—similarities and differences

Abstract: Colloidal particles act in many ways like surfactant molecules, particularly if adsorbed to a fluid–fluid interface. Just as the water or oil-liking tendency of a surfactant is quantified in terms of the hydrophile–lipophile balance (HLB) number, so can that of a spherical particle be described in terms of its wettability via contact angle. Important differences exist, however, between the two types of surface-active material, due in part to the fact that particles are strongly held at interfaces. This review attempts to correlate the behaviour observed in systems containing either particles or surfactant molecules in the areas of adsorption to interfaces, partitioning between phases and solid-stabilised emulsions and foams.