Shosuke Yoshida

Bio: Shosuke Yoshida is an academic researcher from Keio University. The author has contributed to research in topics: Thermococcus kodakarensis & Caldicellulosiruptor bescii. The author has an hindex of 13, co-authored 22 publications receiving 1230 citations. Previous affiliations of Shosuke Yoshida include Kyoto University & Energy Biosciences Institute.

A Bacterium That Degrades and Assimilates Poly(ethylene Terephthalate)

Abstract: Poly(ethylene terephthalate) (PET) is used extensively worldwide in plastic products, and its accumulation in the environment has become a global concern. Because the ability to enzymatically degrade PET has been thought to be limited to a few fungal species, biodegradation is not yet a viable remediation or recycling strategy. By screening natural microbial communities exposed to PET in the environment, we isolated a novel bacterium, Ideonella sakaiensis 201-F6, that is able to use PET as its major energy and carbon source. When grown on PET, this strain produces two enzymes capable of hydrolyzing PET and the reaction intermediate, mono(2-hydroxyethyl) terephthalic acid. Both enzymes are required to enzymatically convert PET efficiently into its two environmentally benign monomers, terephthalic acid and ethylene glycol.

Biodegradation of PET: Current Status and Application Aspects

Abstract: Most petroleum-derived plastics, as exemplified by poly(ethylene terephthalate) (PET), are chemically inactive and highly resistant to microbial attack. The accumulation of plastic waste results in environmental pollution and threatens ecosystems, referred to as the “microplastic issue”. Recently, PET hydrolytic enzymes (PHEs) have been identified and we reported PET degradation by a microbial consortium and its bacterial resident, Ideonella sakaiensis. Bioremediation may thus provide an alternative solution to recycling plastic waste. The mechanism of PET degradation into benign monomers by PET hydrolase and mono(2-hydroxyethyl) terephthalic acid (MHET) hydrolase from I. sakaiensis has been elucidated; nevertheless, biodegradation may require additional development for commercialization owing to the low catalytic activity of these enzymes. Here, we introduce PET degrading microorganisms and the enzymes involved, along with the evolution of PHEs to address the issues that hamper microbial and enzymatic PE...

Ideonella sakaiensis sp. nov., isolated from a microbial consortium that degrades poly(ethylene terephthalate)

Abstract: A Gram-stain-negative, aerobic, non-spore-forming, rod-shaped bacterium, designed strain 201-F6T, was isolated from a microbial consortium that degrades poly(ethylene terephthalate) (PET) collected in Sakai city, Japan, and was characterized on the basis of a polyphasic taxonomic study. The cells were motile with a polar flagellum. The strain contained cytochrome oxidase and catalase. It grew within the pH range 5.5–9.0 (optimally at pH 7–7.5) and at 15–42 oC (optimally at 30–37 oC). The major isoprenoid quinone was ubiquinone with eight isoprene units (Q-8). C16 : 0, C1 7 : 0 cyclo, C18 :1ω7c and C12 : 0 2-OH were the predominant cellular fatty acids. The major polar lipids were phosphatidylethanolamine, lyso-phosphatidylethanolamine, phosphatidylglycerol and diphosphatidylglycerol. The G+C content of genomic DNA was 70.4 mol%. Phylogenetic analysis using the 16S rRNA gene sequences showed that strain 201-F6T was affiliated to the genus Ideonella , and was closely related to Ideonella dechloratans LMG 28178T (97.7 %) and Ideonella azotifigens JCM 15503T (96.6 %). Strain 201-F6T could be clearly distinguished from the related species of the genus Ideonella by its physiological and biochemical characteristics as well as by its phylogenetic position and DNA–DNA relatedness. Therefore, the strain represents a novel species of the genus Ideonella , for which the name Ideonella sakaiensis sp. nov. (type strain 201-F6T=NBRC 110686T=TISTR 2288T) is proposed.

Response to Comment on “A bacterium that degrades and assimilates poly(ethylene terephthalate)”

Abstract: Yang et al suggest that the use of low-crystallinity poly(ethylene terephthalate) (PET) exaggerates our results. However, the primary focus of our study was identifying an organism capable of the biological degradation and assimilation of PET, regardless of its crystallinity. We provide additional PET depolymerization data that further support several other lines of data showing PET assimilation by growing cells of Ideonella sakaiensis.

Enzymatic characterization of AMP phosphorylase and ribose-1,5-bisphosphate isomerase functioning in an archaeal AMP metabolic pathway.

Abstract: AMP phosphorylase (AMPpase), ribose-1,5-bisphosphate (R15P) isomerase, and type III ribulose-1,5-bisphosphate carboxylase/oxygenase (Rubisco) have been proposed to constitute a novel pathway involved in AMP metabolism in the Archaea. Here we performed a biochemical examination of AMPpase and R15P isomerase from Thermococcus kodakarensis. R15P isomerase was specific for the α-anomer of R15P and did not recognize other sugar compounds. We observed that activity was extremely low with the substrate R15P alone but was dramatically activated in the presence of AMP. Using AMP-activated R15P isomerase, we reevaluated the substrate specificity of AMPpase. AMPpase exhibited phosphorylase activity toward CMP and UMP in addition to AMP. The [S]-v plot (plot of velocity versus substrate concentration) of the enzyme toward AMP was sigmoidal, with an increase in activity observed at concentrations higher than approximately 3 mM. The behavior of the two enzymes toward AMP indicates that the pathway is intrinsically designed to prevent excess degradation of intracellular AMP. We further examined the formation of 3-phosphoglycerate from AMP, CMP, and UMP in T. kodakarensis cell extracts. 3-Phosphoglycerate generation was observed from AMP alone, and from CMP or UMP in the presence of dAMP, which also activates R15P isomerase. 3-Phosphoglycerate was not formed when 2-carboxyarabinitol 1,5-bisphosphate, a Rubisco inhibitor, was added. The results strongly suggest that these enzymes are actually involved in the conversion of nucleoside monophosphates to 3-phosphoglycerate in T. kodakarensis.

Iterative model-building, structure refinement, and density modification with the PHENIX AutoBuild Wizard

Abstract: Iterative model-building, structure refinement, and density modification with the PHENIX AutoBuild Wizard Thomas C. Terwilliger a* , Ralf W. Grosse-Kunstleve b , Pavel V. Afonine b , Nigel W. Moriarty b , Peter Zwart b , Li-Wei Hung a , Randy J. Read c , Paul D. Adams b* a b Los Alamos National Laboratory, Mailstop M888, Los Alamos, NM 87545, USA Lawrence Berkeley National Laboratory, One Cyclotron Road, Bldg 64R0121, Berkeley, CA 94720, USA. c Department of Haematology, University of Cambridge, Cambridge CB2 0XY, UK. * Email: terwill@lanl.gov or PDAdams@lbl.gov Running title: The PHENIX AutoBuild Wizard Abstract The PHENIX AutoBuild Wizard is a highly automated tool for iterative model- building, structure refinement and density modification using RESOLVE or TEXTAL model- building, RESOLVE statistical density modification, and phenix.refine structure refinement. Recent advances in the AutoBuild Wizard and phenix.refine include automated detection and application of NCS from models as they are built, extensive model completion algorithms, and automated solvent molecule picking. Model completion algorithms in the AutoBuild Wizard include loop-building, crossovers between chains in different models of a structure, and side-chain optimization. The AutoBuild Wizard has been applied to a set of 48 structures at resolutions ranging from 1.1 A to 3.2 A, resulting in a mean R-factor of 0.24 and a mean free R factor of 0.29. The R-factor of the final model is dependent on the quality of the starting electron density, and relatively independent of resolution. Keywords: Model building; model completion; macromolecular models; Protein Data Bank; structure refinement; PHENIX Introduction Iterative model-building and refinement is a powerful approach to obtaining a complete and accurate macromolecular model. The approach consists of cycles of building an atomic model based on an electron density map for a macromolecular structure, refining the structure, using the refined structure as a basis for improving the map, and building a new model. This type of approach has been carried out in a semi-automated fashion for many years, with manual model-building iterating with automated refinement (Jensen, 1997). More recently, with the development first of ARP/wARP (Perrakis et al., 1999), and later other procedures including RESOLVE iterative model-building and refinement (Terwilliger,

Degradation Rates of Plastics in the Environment

Abstract: Plastic waste is currently generated at a rate approaching 400 Mt year–1. The amount of plastics accumulating in the environment is growing rapidly, yet our understanding of its persistence is very...

An engineered PET depolymerase to break down and recycle plastic bottles

Abstract: Present estimates suggest that of the 359 million tons of plastics produced annually worldwide1, 150–200 million tons accumulate in landfill or in the natural environment2. Poly(ethylene terephthalate) (PET) is the most abundant polyester plastic, with almost 70 million tons manufactured annually worldwide for use in textiles and packaging3. The main recycling process for PET, via thermomechanical means, results in a loss of mechanical properties4. Consequently, de novo synthesis is preferred and PET waste continues to accumulate. With a high ratio of aromatic terephthalate units—which reduce chain mobility—PET is a polyester that is extremely difficult to hydrolyse5. Several PET hydrolase enzymes have been reported, but show limited productivity6,7. Here we describe an improved PET hydrolase that ultimately achieves, over 10 hours, a minimum of 90 per cent PET depolymerization into monomers, with a productivity of 16.7 grams of terephthalate per litre per hour (200 grams per kilogram of PET suspension, with an enzyme concentration of 3 milligrams per gram of PET). This highly efficient, optimized enzyme outperforms all PET hydrolases reported so far, including an enzyme8,9 from the bacterium Ideonella sakaiensis strain 201-F6 (even assisted by a secondary enzyme10) and related improved variants11–14 that have attracted recent interest. We also show that biologically recycled PET exhibiting the same properties as petrochemical PET can be produced from enzymatically depolymerized PET waste, before being processed into bottles, thereby contributing towards the concept of a circular PET economy. Computer-aided engineering produces improvements to an enzyme that breaks down poly(ethylene terephthalate) (PET) into its constituent monomers, which are used to synthesize PET of near-petrochemical grade that can be further processed into bottles.