Shuisheng Jian

Bio: Shuisheng Jian is an academic researcher from Beijing Jiaotong University. The author has contributed to research in topics: Fiber Bragg grating & Optical fiber. The author has an hindex of 29, co-authored 482 publications receiving 3585 citations.

Analytical model for plasmon modes in graphene-coated nanowire.

Abstract: An analytical model for plasmon modes in graphene-coated dielectric nanowire is presented. Plasmon modes could be classified by the azimuthal field distribution characterized by a phase factor exp(imφ) in the electromagnetic field expression and eigen equation of dispersion relation for plasmon modes is derived. The characteristic of plasmon modes could be tuned by changing nanowire radius, dielectric permittivity of nanowire and chemical potential of graphene. The proposed model provides a fast insight into the mode behavior of graphene-coated nanowire, which would be useful for applications based on graphene plasmonics in cylindrical waveguide.

Nanoscale dielectric-graphene-dielectric tunable infrared waveguide with ultrahigh refractive indices

Abstract: We propose in this paper a dielectric-graphene-dielectric tunable infrared waveguide based on multilayer metamaterials with ultrahigh refractive indices. The waveguide modes with different orders are systematically analyzed with numerical simulations based on both multilayer structures and effective medium approach. The waveguide shows hyperbolic dispersion properties from mid-infrared to far-infrared wavelength, which means the modes with ultrahigh mode indices could be supported in the waveguide. Furthermore, the optical properties of the waveguide modes could be tuned by the biased voltages on graphene layers. The waveguide may have various promising applications in the quantum cascade lasers and bio-sensing.

Single-mode graphene-coated nanowire plasmonic waveguide

Abstract: We propose in this Letter a single-mode graphene-coated nanowire surface plasmon waveguide. The single-mode condition and modal cutoff wavelength of high order modes are derived from an analytic model and confirmed by numerical simulation. The mode number diagram of the proposed waveguide in the wavelength-radius space is also demonstrated. By changing the Fermi level of graphene, the performance of the proposed waveguide could be tuned flexibly, offering potential application in tunable nanophotonic devices.

Refractive Index and Temperature Sensing Based on an Optoelectronic Oscillator Incorporating a Fabry–Perot Fiber Bragg Grating

Abstract: An ultrafast high-sensitivity refractive index (RI) and temperature-sensing system based on an optoelectronic oscillator (OEO) is proposed and demonstrated in this paper. A Fabry–Perot fiber Bragg grating (FP-FBG), which combines a gap with two FBGs in a silica V-shaped slot and characterizes a narrow notch in the reflection spectrum, is incorporated in the OEO to implement a microwave photonic filter and perform oscillating frequency selection. A microwave signal is generated by the OEO, whose oscillating frequency is determined by the center frequency of the FP-FBG notch, which varies with the surrounding environments. The RI or the temperature change can be accordingly measured by monitoring the frequency shift of the microwave signal using an electrical spectrum analyzer or a digital signal processor. An experiment is performed to verify the proposal. An RI sensitivity of 413.8 MHz/0.001RIU and a temperature sensitivity of 2516 MHz/°C are successively demonstrated.

Design of photonic crystal fibers for dispersion-related applications

Abstract: A general procedure for design of photonic crystal fibers (PCFs) with desirable dispersion properties is presented. The design model is based on the combination of a rigorous vector mode solver and a scaling transformation for the dispersion properties of the PCFs. In comparison with the conventional design method, the new design procedure is more efficient and can be readily automated for the purpose of design optimization. Several applications of the design procedure, e.g., the design optimization for dispersion shifted fibers, dispersion flattened fibers, and dispersion compensation fibers, are demonstrated and discussed.

Instabilities, breathers and rogue waves in optics

Abstract: Curious wave phenomena that occur in optical fibres due to the interplay of instability and nonlinear effects are reviewed.

Highly confined low-loss plasmons in graphene-boron nitride heterostructures

Abstract: Graphene plasmons were predicted to possess ultra-strong field confinement and very low damping at the same time, enabling new classes of devices for deep subwavelength metamaterials, single-photon nonlinearities, extraordinarily strong light-matter interactions and nano-optoelectronic switches. While all of these great prospects require low damping, thus far strong plasmon damping was observed, with both impurity scattering and many-body effects in graphene proposed as possible explanations. With the advent of van der Waals heterostructures, new methods have been developed to integrate graphene with other atomically flat materials. In this letter we exploit near-field microscopy to image propagating plasmons in high quality graphene encapsulated between two films of hexagonal boron nitride (h-BN). We determine dispersion and particularly plasmon damping in real space. We find unprecedented low plasmon damping combined with strong field confinement, and identify the main damping channels as intrinsic thermal phonons in the graphene and dielectric losses in the h-BN. The observation and in-depth understanding of low plasmon damping is the key for the development of graphene nano-photonic and nano-optoelectronic devices.

Space-division multiplexing: the next frontier in optical communication

Abstract: Space-division multiplexing (SDM) uses multiplicity of space channels to increase capacity for optical communication. It is applicable for optical communication in both free space and guided waves. This paper focuses on SDM for fiber-optic communication using few-mode fibers or multimode fibers, in particular on the critical challenge of mode crosstalk. Multiple-input–multiple-output (MIMO) equalization methods developed for wireless communication can be applied as an electronic method to equalize mode crosstalk. Optical approaches, including differential modal group delay management, strong mode coupling, and multicore fibers, are necessary to bring the computational complexity for MIMO mode crosstalk equalization to practical levels. Progress in passive devices, such as (de)multiplexers, and active devices, such as amplifiers and switches, which are considered straightforward challenges in comparison with mode crosstalk, are reviewed. Finally, we present the prospects for SDM in optical transmission and networking.

Tilted fiber Bragg grating sensors

Abstract: Optical fiber gratings have developed into a mature technology with a wide range of applications in various areas, including physical sensing for temperature, strain, acoustic waves and pressure. All of these applications rely on the perturbation of the period or refractive index of a grating inscribed in the fiber core as a transducing mechanism between a quantity to be measured and the optical spectral response of the fiber grating. This paper presents a relatively recent variant of the fiber grating concept, whereby a small tilt of the grating fringes causes coupling of the optical power from the core mode into a multitude of cladding modes, each with its own wavevector and mode field shape. The main consequence of doing so is that the differential response of the modes can then be used to multiply the sensing modalities available for a single fiber grating and also to increase the sensor resolution by taking advantage of the large amount of data available. In particular, the temperature cross-sensitivity and power source fluctuation noise inherent in all fiber grating designs can be completely eliminated by referencing all the spectral measurements to the wavelength and power level of the core mode back-reflection. The mode resonances have a quality factor of 105, and they can be observed in reflection or transmission. A thorough review of experimental and theoretical results will show that tilted fiber Bragg gratings can be used for high resolution refractometry, surface plasmon resonance applications, and multiparameter physical sensing (strain, vibration, curvature, and temperature).