Author
Shuit-Tong Lee
Other affiliations: University of British Columbia, Hong Kong University of Science and Technology, University of Western Ontario ...read more
Bio: Shuit-Tong Lee is an academic researcher from Soochow University (Suzhou). The author has contributed to research in topics: Silicon & Nanowire. The author has an hindex of 138, co-authored 1121 publications receiving 77112 citations. Previous affiliations of Shuit-Tong Lee include University of British Columbia & Hong Kong University of Science and Technology.
Topics: Silicon, Nanowire, OLED, Electroluminescence, Diamond
Papers published on a yearly basis
Papers
More filters
TL;DR: The surface properties of silicon nanowires after the removal of the surface oxide were studied in this article, where it was found that the surface silicon of the SiNWs can readily reduce silver (I) and copper (II) ions to metal aggregates of various morphologies.
Abstract: The chemical reactivity of hydrogen-passivated surface of silicon nanowires (SiNWs) towards the reductive deposition of silver and copper ions from solution is reported. SiNWs synthesized by laser ablation were used in the investigation. The surface properties of SiNWs after the removal of the surface oxide were studied. It is found that the surface silicon of the SiNWs can readily reduce silver (I) and copper (II) ions to metal aggregates of various morphologies on the SiNW surface at room temperature. The reaction products have been characterized with scanning electron microscopy, energy dispersive x-ray spectroscopy, high-resolution transmission electron microscopy, electron energy loss spectroscopy, and x-ray photoelectron spectroscopy. By varying the concentration of Ag(I) ions in the solution, nanostructures of silver with different shapes and sizes can be obtained. This approach for synthesis of metal nanostructures offers a potential method for the preparation of desired metal catalysts.
36 citations
TL;DR: It is found that the adsorbed PA molecules slightly affect the structure of silicon core and the modified surface of SiQDs can serve as a reaction substrate to oxygen and solvent molecules, which is responsible for the increase in both PL stability and water solubility.
Abstract: The origin and stability of photoluminescence (PL) are critical issues for silicon nanoparticles to be used as biological probes. Optical and electronic properties of propionic-acid (PA) -terminated silicon quantum dots (SiQDs) were studied using the density-functional tight-binding method. We find that the adsorbed PA molecules slightly affect the structure of silicon core. The PA adsorption does not change the optical properties of SiQDs, while it substantially decreases the ionization potentials in the excited state and results in some new active orbitals with adjacent energies around the Fermi energy level. Accordingly, the modified surface of SiQDs can serve as a reaction substrate to oxygen and solvent molecules, which is responsible for the increase in both PL stability and water solubility.
36 citations
TL;DR: In this paper, the dependence of phase composition and electrical properties of hexagonal boron nitride (hBN) films on the implantation fluence and annealing was studied.
Abstract: p-type conduction in hexagonal boron nitride (hBN) films was achieved by beryllium implantation and subsequent rapid thermal annealing treatment. The dependence of phase composition and electrical properties of hBN films on the implantation fluence and annealing was studied. A maximum resistivity reduction by six orders of magnitude was demonstrated. Hall measurements revealed a corresponding hole concentration of 3×1019 cm−3 and mobility of 27 cm2/V s. The activation energy of Be ions was estimated to be 0.21 eV. It is suggested that hBN is a promising wide bandgap semiconductor for applications in high-temperature electronic devices and transparent conductive coatings.
36 citations
TL;DR: In this paper, a density-functional tight-binding method was used to fully capping surface of SiQDs by amine, which is more effective in protecting the surface against oxidation.
Abstract: Water-soluble photoluminescent (PL) silicon quantum dots (SiQDs) can be obtained by surface modification with small organic molecules, while still leaving some sites uncovered by the employed organic molecules due to steric repulsion. Using a density-functional tight-binding method, we show the possibility of fully capping surface of SiQDs by amine, which is more effective in protecting the surface against oxidation. The presence of amine not only reduces the optical gaps but also results in a significant enhancement of absorbance and fluorescence. Moreover, the amine-capped SiQDs are expected to be water soluble and PL stable, and thus could be used as biological sensors.
36 citations
TL;DR: In this article, a triaryl pyrazoline derivative was synthesized and used as a dopant in blue organic electroluminescent devices, which achieved a blue emission peaking around 470 nm and a luminance of 5500 cd/m2 at a current density of about 300 mA/cm2.
35 citations
Cited by
More filters
TL;DR: This work reviews recent progress in graphene research and in the development of production methods, and critically analyse the feasibility of various graphene applications.
Abstract: Recent years have witnessed many breakthroughs in research on graphene (the first two-dimensional atomic crystal) as well as a significant advance in the mass production of this material. This one-atom-thick fabric of carbon uniquely combines extreme mechanical strength, exceptionally high electronic and thermal conductivities, impermeability to gases, as well as many other supreme properties, all of which make it highly attractive for numerous applications. Here we review recent progress in graphene research and in the development of production methods, and critically analyse the feasibility of various graphene applications.
7,987 citations
TL;DR: The theoretical charge capacity for silicon nanowire battery electrodes is achieved and maintained a discharge capacity close to 75% of this maximum, with little fading during cycling.
Abstract: There is great interest in developing rechargeable lithium batteries with higher energy capacity and longer cycle life for applications in portable electronic devices, electric vehicles and implantable medical devices. Silicon is an attractive anode material for lithium batteries because it has a low discharge potential and the highest known theoretical charge capacity (4,200 mAh g(-1); ref. 2). Although this is more than ten times higher than existing graphite anodes and much larger than various nitride and oxide materials, silicon anodes have limited applications because silicon's volume changes by 400% upon insertion and extraction of lithium which results in pulverization and capacity fading. Here, we show that silicon nanowire battery electrodes circumvent these issues as they can accommodate large strain without pulverization, provide good electronic contact and conduction, and display short lithium insertion distances. We achieved the theoretical charge capacity for silicon anodes and maintained a discharge capacity close to 75% of this maximum, with little fading during cycling.
6,104 citations
TL;DR: The beltlike morphology appears to be a distinctive and common structural characteristic for the family of semiconducting oxides with cations of different valence states and materials of distinct crystallographic structures, which could be an ideal system for fully understanding dimensionally confined transport phenomena in functional oxides.
Abstract: Ultralong beltlike (or ribbonlike) nanostructures (so-called nanobelts) were successfully synthesized for semiconducting oxides of zinc, tin, indium, cadmium, and gallium by simply evaporating the desired commercial metal oxide powders at high temperatures. The as-synthesized oxide nanobelts are pure, structurally uniform, and single crystalline, and most of them are free from defects and dislocations. They have a rectanglelike cross section with typical widths of 30 to 300 nanometers, width-to-thickness ratios of 5 to 10, and lengths of up to a few millimeters. The beltlike morphology appears to be a distinctive and common structural characteristic for the family of semiconducting oxides with cations of different valence states and materials of distinct crystallographic structures. The nanobelts could be an ideal system for fully understanding dimensionally confined transport phenomena in functional oxides and building functional devices along individual nanobelts.
5,677 citations
TL;DR: The state of the art, future directions and open questions in Raman spectroscopy of graphene are reviewed, and essential physical processes whose importance has only recently been recognized are described.
Abstract: Raman spectroscopy is an integral part of graphene research. It is used to determine the number and orientation of layers, the quality and types of edge, and the effects of perturbations, such as electric and magnetic fields, strain, doping, disorder and functional groups. This, in turn, provides insight into all sp(2)-bonded carbon allotropes, because graphene is their fundamental building block. Here we review the state of the art, future directions and open questions in Raman spectroscopy of graphene. We describe essential physical processes whose importance has only recently been recognized, such as the various types of resonance at play, and the role of quantum interference. We update all basic concepts and notations, and propose a terminology that is able to describe any result in literature. We finally highlight the potential of Raman spectroscopy for layered materials other than graphene.
5,673 citations
TL;DR: This paper presents a meta-analysis of the chiral stationary phase transition of Na6(CO3)(SO4)2, a major component of the response of the immune system to Na2CO3.
Abstract: Ju Mei,†,‡,∥ Nelson L. C. Leung,†,‡,∥ Ryan T. K. Kwok,†,‡ Jacky W. Y. Lam,†,‡ and Ben Zhong Tang*,†,‡,§ †HKUST-Shenzhen Research Institute, Hi-Tech Park, Nanshan, Shenzhen 518057, China ‡Department of Chemistry, HKUST Jockey Club Institute for Advanced Study, Institute of Molecular Functional Materials, Division of Biomedical Engineering, State Key Laboratory of Molecular Neuroscience, Division of Life Science, The Hong Kong University of Science and Technology, Clear Water Bay, Kowloon, Hong Kong, China Guangdong Innovative Research Team, SCUT-HKUST Joint Research Laboratory, State Key Laboratory of Luminescent Materials and Devices, South China University of Technology, Guangzhou 510640, China
5,658 citations