Shuit-Tong Lee

Bio: Shuit-Tong Lee is an academic researcher from Soochow University (Suzhou). The author has contributed to research in topics: Silicon & Nanowire. The author has an hindex of 138, co-authored 1121 publications receiving 77112 citations. Previous affiliations of Shuit-Tong Lee include University of British Columbia & Hong Kong University of Science and Technology.

Silicon/Organic Heterojunction for Photoelectrochemical Energy Conversion Photoanode with a Record Photovoltage

Abstract: Silicon (Si) is a good photon absorption material for photoelectrochemical (PEC) conversion. Recently, the relatively low photovoltage of Si-based PEC anode is one of the most significant factors limiting its performance. To achieve a high photovoltage in PEC electrode, both a large barrier height and high-quality surface passivation of Si are indispensable. However, it is still challenging to induce a large band bending and passivate Si surface simultaneously in Si-based PEC photoanodes so far, which hinders their performance. Here, we develop a simple Si/poly(3,4-ethylenedioxythiophene):polystyrenesulfonate (PEDOT:PSS) heterojunction with large band banding and excellent surface passiviation for efficient PEC conversion. A chemically modified PEDOT:PSS film acts as both a surface passiviation layer and an effective catalyst simultaneously without sacrificing band bending level. A record photovoltage for Si-based PEC photoanodes as high as 657 mV is achieved via optimizing the PEDOT:PSS film fabrication ...

Growth mechanism of ZnO nanowires via direct Zn evaporation

Abstract: Zinc oxide (ZnO) nanowire synthesized from direct Zinc (Zn) vapor transport in O2 environment has been studied. The results show that the first step is the formation of ZnO film on the substrate. Then anisotropic abnormal grain growth in the form of ZnO platelets takes place. Subsequently, single-crystalline ZnO platelets grow in [0001] direction to form whiskers. During whisker growth, transformation from layer-by-layer growth to simultaneous multilayer growth occurs when the two-dimensional (2D) Ehrlich–Schwoebel (ES) barrier at the ZnO island edge is sufficiently large and the monolayer island diameter is smaller than the island spacing. As multilayered islands grows far away from the base, isotropic mass diffusion (spherical diffusion) will gradually displace anisotropic diffusion (linear diffusion), which contributes to the formation of pyramid on the top plane of the whisker. When the pyramid contains enough atomic layers, the 2D ES barrier transits to 3-dimensional ES barrier, which contributes to repeated nucleation and growth of multilayered islands or pyramids on the old pyramids. The pyramids play a critical role to taper the whisker to nanorod with a diameter less than 100 nm. The nanorod then grows to nanowire via repeated growth of epitaxial hexagonal-pyramid shape-like islands on the (0001)-plane with $$ \left\{ {11\overline{2} 3} \right\} $$ facets as the slope planes. During coarsening, the breakage of step motion of $$ \left\{ {11\overline{2} 3} \right\} $$ facets and the appearance of $$ \left\{ {11\overline{2} 0} \right\} $$ facets on the base of pyramids may result from the step bunching of {0001} facets, which is consistent with the existence of “2D” Ehrlich–Schwoebel barrier on the edge of (0001) facets.

Ordered silicon nanocones arrays for label-free DNA quantitative analysis by surface-enhanced Raman spectroscopy

Abstract: Ordered vertical silicon nanocones arrays coated with silver nanoparticles (AgNPs@SiNCs) are developed as surface-enhanced Raman scattering (SERS)-active substrate, which features good uniformity and reliable reproducibility of SERS signals Label-free DNA at low concentrations (10−8 M) could be quantitatively analyzed via SERS using the AgNPs@SiNCs The Raman peak at 732 cm−1 due to adenine breathing mode was selected as an endogenous Raman marker for quantitative detection of label-free DNA The AgNPs@SiNCs as high-performance SERS-active substrates are attractive for surface enhancement mechanism investigation and biochemical sensing applications

Organic electroluminescent device with improved hole injecting structure

Abstract: An organic electroluminescent device (OELD) with improved luminescent efficiency has been fabricated upon inclusion of an inorganic buffer layer in the hole injecting or electron injecting regions. The structure of the device can be as follows (from bottom to top): ITO\buffer layer\NPB\Alq\Mg:Ag. In comparison with devices without the buffer layer, the present OELD may be more efficient in a proper bias condition.

A roadmap for graphene

Abstract: Recent years have witnessed many breakthroughs in research on graphene (the first two-dimensional atomic crystal) as well as a significant advance in the mass production of this material. This one-atom-thick fabric of carbon uniquely combines extreme mechanical strength, exceptionally high electronic and thermal conductivities, impermeability to gases, as well as many other supreme properties, all of which make it highly attractive for numerous applications. Here we review recent progress in graphene research and in the development of production methods, and critically analyse the feasibility of various graphene applications.

High-performance lithium battery anodes using silicon nanowires

Abstract: There is great interest in developing rechargeable lithium batteries with higher energy capacity and longer cycle life for applications in portable electronic devices, electric vehicles and implantable medical devices. Silicon is an attractive anode material for lithium batteries because it has a low discharge potential and the highest known theoretical charge capacity (4,200 mAh g(-1); ref. 2). Although this is more than ten times higher than existing graphite anodes and much larger than various nitride and oxide materials, silicon anodes have limited applications because silicon's volume changes by 400% upon insertion and extraction of lithium which results in pulverization and capacity fading. Here, we show that silicon nanowire battery electrodes circumvent these issues as they can accommodate large strain without pulverization, provide good electronic contact and conduction, and display short lithium insertion distances. We achieved the theoretical charge capacity for silicon anodes and maintained a discharge capacity close to 75% of this maximum, with little fading during cycling.

Nanobelts of Semiconducting Oxides

Abstract: Ultralong beltlike (or ribbonlike) nanostructures (so-called nanobelts) were successfully synthesized for semiconducting oxides of zinc, tin, indium, cadmium, and gallium by simply evaporating the desired commercial metal oxide powders at high temperatures. The as-synthesized oxide nanobelts are pure, structurally uniform, and single crystalline, and most of them are free from defects and dislocations. They have a rectanglelike cross section with typical widths of 30 to 300 nanometers, width-to-thickness ratios of 5 to 10, and lengths of up to a few millimeters. The beltlike morphology appears to be a distinctive and common structural characteristic for the family of semiconducting oxides with cations of different valence states and materials of distinct crystallographic structures. The nanobelts could be an ideal system for fully understanding dimensionally confined transport phenomena in functional oxides and building functional devices along individual nanobelts.

Raman spectroscopy as a versatile tool for studying the properties of graphene

Abstract: Raman spectroscopy is an integral part of graphene research. It is used to determine the number and orientation of layers, the quality and types of edge, and the effects of perturbations, such as electric and magnetic fields, strain, doping, disorder and functional groups. This, in turn, provides insight into all sp(2)-bonded carbon allotropes, because graphene is their fundamental building block. Here we review the state of the art, future directions and open questions in Raman spectroscopy of graphene. We describe essential physical processes whose importance has only recently been recognized, such as the various types of resonance at play, and the role of quantum interference. We update all basic concepts and notations, and propose a terminology that is able to describe any result in literature. We finally highlight the potential of Raman spectroscopy for layered materials other than graphene.

Aggregation-Induced Emission: Together We Shine, United We Soar!

Abstract: Ju Mei,†,‡,∥ Nelson L. C. Leung,†,‡,∥ Ryan T. K. Kwok,†,‡ Jacky W. Y. Lam,†,‡ and Ben Zhong Tang*,†,‡,§ †HKUST-Shenzhen Research Institute, Hi-Tech Park, Nanshan, Shenzhen 518057, China ‡Department of Chemistry, HKUST Jockey Club Institute for Advanced Study, Institute of Molecular Functional Materials, Division of Biomedical Engineering, State Key Laboratory of Molecular Neuroscience, Division of Life Science, The Hong Kong University of Science and Technology, Clear Water Bay, Kowloon, Hong Kong, China Guangdong Innovative Research Team, SCUT-HKUST Joint Research Laboratory, State Key Laboratory of Luminescent Materials and Devices, South China University of Technology, Guangzhou 510640, China