Author
Shuit-Tong Lee
Other affiliations: University of British Columbia, Hong Kong University of Science and Technology, University of Western Ontario ...read more
Bio: Shuit-Tong Lee is an academic researcher from Soochow University (Suzhou). The author has contributed to research in topics: Silicon & Nanowire. The author has an hindex of 138, co-authored 1121 publications receiving 77112 citations. Previous affiliations of Shuit-Tong Lee include University of British Columbia & Hong Kong University of Science and Technology.
Topics: Silicon, Nanowire, OLED, Electroluminescence, Diamond
Papers published on a yearly basis
Papers
More filters
TL;DR: In general, a NP is enclosed by several face planes and the surface area is S i and the corresponding atom density is ρ i, where�b is the cohesive energy per atom of the bulk material and N is the total number of atoms.
Abstract: �b is the cohesive energy per atom of the bulk material and N is the total number of atoms. In general, a NP is enclosed by several face planes. For the i -th plane, its surface area is S i and the corresponding atom density is ρ i . The parameter A i is the ratio between the total number of bonds of a surface atom in the i -th plane and total number of bonds of a core atom. Then
28 citations
TL;DR: The fundamental properties of silicon nanowires (SiNWs) are highly dependent on dimension and surface states, despite many studies of the surface effects on the important properties of SiNWs.
Abstract: The fundamental properties of silicon nanowires (SiNWs) are highly dependent on dimension and surface states. Despite many studies of the surface effects on the important properties of SiNWs, the u...
28 citations
TL;DR: An efficient non-oped green organic light-emitting device was demonstrated by using a dual-functional electroluminescent material, 4,4′,4″-tris[8-(7,10-diphenylfluoranthenyl)] phenylamine (TDPFPA) as mentioned in this paper.
Abstract: An efficient nondoped green organic light-emitting device was demonstrated by using a dual-functional electroluminescent material, 4,4′,4″-tris[8-(7,10-diphenylfluoranthenyl)] phenylamine (TDPFPA). TDPFPA was shown to be a good hole transporting [with a mobility of (1.1–1.2)×10−4cm2V−1s−1 at (1.8–5.6)×105Vcm−1] and efficient fluorescent material with an exceptionally high glass transition temperature of 237°C. The device with a simple structure of indium tin oxide/TDPFPA/4,7-diphenyl-1,10-phenanthroline/LiF∕Al showed green emission with Commission Internationale de L’Eclairage coordinates of (0.24, 0.54), a current efficiency of 9.9cd∕A, and power efficiency of 10.6lm∕W.
28 citations
TL;DR: In this paper, an array of highly ordered ZnO nanowires has been synthesized on polycrystalline Al-doped (AZO) buffer layers prepared on p-Si substrates with assistance of a thermal deposition method.
Abstract: Arrays of highly ordered ZnO nanowires have been synthesized on polycrystalline Al-doped ZnO (AZO) buffer layers prepared on p-Si substrates (7–13 Ω cm) with assistance of a thermal deposition method. The diameter and interspacing of the nanowires have been controlled by the growth conditions and properties of AZO films. The optimized array of ZnO nanowires shows low turn-on and threshold fields (∼1.1 and ∼3.0 V/μm, respectively) and displays exceptional time stability of electron field emission. The time-fluctuation instability was found to be less than 0.6% at a current density of 10 mA/cm2, as measured for 500 min. The low turn-on and threshold fields as well as the stable electron emission current suggest that the arrays of ZnO nanowires could be considered in some electron field emission applications.
27 citations
TL;DR: In this article, the results of heteroepitaxial growth of single-crystalline ZnS nanowire arrays on CdS nanoribbon substrates by the metal-catalyzed vapor-liquid solid growth method were presented.
Abstract: The authors present the results of heteroepitaxial growth of single-crystalline ZnS nanowire arrays on CdS nanoribbon substrates by the metal-catalyzed vapor-liquid-solid growth method. ZnS nanowire arrays were vertically or crosswise aligned to the surface of CdS nanoribbon substrates. Room-temperature lasing from ZnS nanowire arrays was demonstrated. The present synthesis provides a new approach to the rational design of building blocks for nanodevices.
27 citations
Cited by
More filters
TL;DR: This work reviews recent progress in graphene research and in the development of production methods, and critically analyse the feasibility of various graphene applications.
Abstract: Recent years have witnessed many breakthroughs in research on graphene (the first two-dimensional atomic crystal) as well as a significant advance in the mass production of this material. This one-atom-thick fabric of carbon uniquely combines extreme mechanical strength, exceptionally high electronic and thermal conductivities, impermeability to gases, as well as many other supreme properties, all of which make it highly attractive for numerous applications. Here we review recent progress in graphene research and in the development of production methods, and critically analyse the feasibility of various graphene applications.
7,987 citations
TL;DR: The theoretical charge capacity for silicon nanowire battery electrodes is achieved and maintained a discharge capacity close to 75% of this maximum, with little fading during cycling.
Abstract: There is great interest in developing rechargeable lithium batteries with higher energy capacity and longer cycle life for applications in portable electronic devices, electric vehicles and implantable medical devices. Silicon is an attractive anode material for lithium batteries because it has a low discharge potential and the highest known theoretical charge capacity (4,200 mAh g(-1); ref. 2). Although this is more than ten times higher than existing graphite anodes and much larger than various nitride and oxide materials, silicon anodes have limited applications because silicon's volume changes by 400% upon insertion and extraction of lithium which results in pulverization and capacity fading. Here, we show that silicon nanowire battery electrodes circumvent these issues as they can accommodate large strain without pulverization, provide good electronic contact and conduction, and display short lithium insertion distances. We achieved the theoretical charge capacity for silicon anodes and maintained a discharge capacity close to 75% of this maximum, with little fading during cycling.
6,104 citations
TL;DR: The beltlike morphology appears to be a distinctive and common structural characteristic for the family of semiconducting oxides with cations of different valence states and materials of distinct crystallographic structures, which could be an ideal system for fully understanding dimensionally confined transport phenomena in functional oxides.
Abstract: Ultralong beltlike (or ribbonlike) nanostructures (so-called nanobelts) were successfully synthesized for semiconducting oxides of zinc, tin, indium, cadmium, and gallium by simply evaporating the desired commercial metal oxide powders at high temperatures. The as-synthesized oxide nanobelts are pure, structurally uniform, and single crystalline, and most of them are free from defects and dislocations. They have a rectanglelike cross section with typical widths of 30 to 300 nanometers, width-to-thickness ratios of 5 to 10, and lengths of up to a few millimeters. The beltlike morphology appears to be a distinctive and common structural characteristic for the family of semiconducting oxides with cations of different valence states and materials of distinct crystallographic structures. The nanobelts could be an ideal system for fully understanding dimensionally confined transport phenomena in functional oxides and building functional devices along individual nanobelts.
5,677 citations
TL;DR: The state of the art, future directions and open questions in Raman spectroscopy of graphene are reviewed, and essential physical processes whose importance has only recently been recognized are described.
Abstract: Raman spectroscopy is an integral part of graphene research. It is used to determine the number and orientation of layers, the quality and types of edge, and the effects of perturbations, such as electric and magnetic fields, strain, doping, disorder and functional groups. This, in turn, provides insight into all sp(2)-bonded carbon allotropes, because graphene is their fundamental building block. Here we review the state of the art, future directions and open questions in Raman spectroscopy of graphene. We describe essential physical processes whose importance has only recently been recognized, such as the various types of resonance at play, and the role of quantum interference. We update all basic concepts and notations, and propose a terminology that is able to describe any result in literature. We finally highlight the potential of Raman spectroscopy for layered materials other than graphene.
5,673 citations
TL;DR: This paper presents a meta-analysis of the chiral stationary phase transition of Na6(CO3)(SO4)2, a major component of the response of the immune system to Na2CO3.
Abstract: Ju Mei,†,‡,∥ Nelson L. C. Leung,†,‡,∥ Ryan T. K. Kwok,†,‡ Jacky W. Y. Lam,†,‡ and Ben Zhong Tang*,†,‡,§ †HKUST-Shenzhen Research Institute, Hi-Tech Park, Nanshan, Shenzhen 518057, China ‡Department of Chemistry, HKUST Jockey Club Institute for Advanced Study, Institute of Molecular Functional Materials, Division of Biomedical Engineering, State Key Laboratory of Molecular Neuroscience, Division of Life Science, The Hong Kong University of Science and Technology, Clear Water Bay, Kowloon, Hong Kong, China Guangdong Innovative Research Team, SCUT-HKUST Joint Research Laboratory, State Key Laboratory of Luminescent Materials and Devices, South China University of Technology, Guangzhou 510640, China
5,658 citations