Shuit-Tong Lee

Bio: Shuit-Tong Lee is an academic researcher from Soochow University (Suzhou). The author has contributed to research in topics: Silicon & Nanowire. The author has an hindex of 138, co-authored 1121 publications receiving 77112 citations. Previous affiliations of Shuit-Tong Lee include University of British Columbia & Hong Kong University of Science and Technology.

Tellurium-modified silicon nanowires with a large negative temperature coefficient of resistance

Abstract: The paper reported a thermosensitive material based on tellurium nanoparticle-decorated silicon nanowires with large negative temperature coefficient of resistance. In the fabrication progress, silicon nanowires were etched with HF to get hydrogen-terminated ones, which could reduce TeO32− ion to form Te-modified silicon nanowires. Such Te-modified silicon nanowires showed good temperature-dependent performance as a linear relationship between resistivity and temperature in the range from 30 to 100 °C with high negative temperature coefficient of resistance being 8.2 × 10−3 °C−1.

Improvement of interface formation between metal electrode and polymer film by polymer surface modification using ion sputtering

Abstract: The surface of poly (9,9-dioctylfluorene) (PFO) film was modified by 1.0 keV Ar+ irradiation with a dose of 6.5×1014 ions/cm2 prior to Ca deposition. Ultraviolet and x-ray photoelectron spectroscopic studies indicated that the modified surface could effectively block Ca diffusion into the PFO film and prevent the formation of doping-induced bipolaron states in the former forbidden energy gap. As a result, a sharper metal contact on the surface of the PFO film could be formed, compared to that on the surface without Ar+ irradiation. The results suggest that the judicial surface modification of polymer surfaces may be useful for the improvement of metal/polymer contacts and thus device performance.

Photoelectroreduction of Building-Block Chemicals

Abstract: Conventional photoelectrochemical cells utilize solar energy to drive the chemical conversion of water or CO2 into useful chemical fuels. Such processes are confronted with general challenges, including the low intrinsic activities and inconvenient storage and transportation of their gaseous products. A photoelectrochemical approach is proposed to drive the reductive production of industrial building-block chemicals and demonstrate that succinic acid and glyoxylic acid can be readily synthesized on Si nanowire array photocathodes free of any cocatalyst and at room temperature. These photocathodes exhibit a positive onset potential, large saturation photocurrent density, high reaction selectivity, and excellent operation durability. They capitalize on the large photovoltage generated from the semiconductor/electrolyte junction to partially offset the required external bias, and thereby make this photoelectrosynthetic approach significantly more sustainable compared to traditional electrosynthesis.

Arrays of Si cones prepared by ion beams: growth mechanisms

Abstract: Arrays of uniformly distributed Si cones with controlled orientations are fabricated on Si substrates by an ion beam technique. The axes of produced Si cones are well aligned with the direction of ion beams. Each cone essentially consists of a metal containing tip and a single crystalline Si base with the crystallographic orientation identical to the Si substrate. TEM studies show tapered pit interface between the tip and the base, visualizing the ion impinging process. The tip comprises tetragonal MoSi 2 , domains of Mo-modulated Si ordered superstructures and a few Mo nanoparticles. Experimental evidence indicates that the cone formation follows the left-standing model. Since the cones progressively are sharpened with the elapsed time of their formation, they might develop into whiskers if the ion bombardment and supply of sputtered metal clusters are prolonged.

A roadmap for graphene

Abstract: Recent years have witnessed many breakthroughs in research on graphene (the first two-dimensional atomic crystal) as well as a significant advance in the mass production of this material. This one-atom-thick fabric of carbon uniquely combines extreme mechanical strength, exceptionally high electronic and thermal conductivities, impermeability to gases, as well as many other supreme properties, all of which make it highly attractive for numerous applications. Here we review recent progress in graphene research and in the development of production methods, and critically analyse the feasibility of various graphene applications.

High-performance lithium battery anodes using silicon nanowires

Abstract: There is great interest in developing rechargeable lithium batteries with higher energy capacity and longer cycle life for applications in portable electronic devices, electric vehicles and implantable medical devices. Silicon is an attractive anode material for lithium batteries because it has a low discharge potential and the highest known theoretical charge capacity (4,200 mAh g(-1); ref. 2). Although this is more than ten times higher than existing graphite anodes and much larger than various nitride and oxide materials, silicon anodes have limited applications because silicon's volume changes by 400% upon insertion and extraction of lithium which results in pulverization and capacity fading. Here, we show that silicon nanowire battery electrodes circumvent these issues as they can accommodate large strain without pulverization, provide good electronic contact and conduction, and display short lithium insertion distances. We achieved the theoretical charge capacity for silicon anodes and maintained a discharge capacity close to 75% of this maximum, with little fading during cycling.

Nanobelts of Semiconducting Oxides

Abstract: Ultralong beltlike (or ribbonlike) nanostructures (so-called nanobelts) were successfully synthesized for semiconducting oxides of zinc, tin, indium, cadmium, and gallium by simply evaporating the desired commercial metal oxide powders at high temperatures. The as-synthesized oxide nanobelts are pure, structurally uniform, and single crystalline, and most of them are free from defects and dislocations. They have a rectanglelike cross section with typical widths of 30 to 300 nanometers, width-to-thickness ratios of 5 to 10, and lengths of up to a few millimeters. The beltlike morphology appears to be a distinctive and common structural characteristic for the family of semiconducting oxides with cations of different valence states and materials of distinct crystallographic structures. The nanobelts could be an ideal system for fully understanding dimensionally confined transport phenomena in functional oxides and building functional devices along individual nanobelts.

Raman spectroscopy as a versatile tool for studying the properties of graphene

Abstract: Raman spectroscopy is an integral part of graphene research. It is used to determine the number and orientation of layers, the quality and types of edge, and the effects of perturbations, such as electric and magnetic fields, strain, doping, disorder and functional groups. This, in turn, provides insight into all sp(2)-bonded carbon allotropes, because graphene is their fundamental building block. Here we review the state of the art, future directions and open questions in Raman spectroscopy of graphene. We describe essential physical processes whose importance has only recently been recognized, such as the various types of resonance at play, and the role of quantum interference. We update all basic concepts and notations, and propose a terminology that is able to describe any result in literature. We finally highlight the potential of Raman spectroscopy for layered materials other than graphene.

Aggregation-Induced Emission: Together We Shine, United We Soar!

Abstract: Ju Mei,†,‡,∥ Nelson L. C. Leung,†,‡,∥ Ryan T. K. Kwok,†,‡ Jacky W. Y. Lam,†,‡ and Ben Zhong Tang*,†,‡,§ †HKUST-Shenzhen Research Institute, Hi-Tech Park, Nanshan, Shenzhen 518057, China ‡Department of Chemistry, HKUST Jockey Club Institute for Advanced Study, Institute of Molecular Functional Materials, Division of Biomedical Engineering, State Key Laboratory of Molecular Neuroscience, Division of Life Science, The Hong Kong University of Science and Technology, Clear Water Bay, Kowloon, Hong Kong, China Guangdong Innovative Research Team, SCUT-HKUST Joint Research Laboratory, State Key Laboratory of Luminescent Materials and Devices, South China University of Technology, Guangzhou 510640, China