Shuit-Tong Lee

Bio: Shuit-Tong Lee is an academic researcher from Soochow University (Suzhou). The author has contributed to research in topics: Silicon & Nanowire. The author has an hindex of 138, co-authored 1121 publications receiving 77112 citations. Previous affiliations of Shuit-Tong Lee include University of British Columbia & Hong Kong University of Science and Technology.

Water‐Dispersed Near‐Infrared‐Emitting Quantum Dots of Ultrasmall Sizes for In Vitro and In Vivo Imaging

Abstract: Near-infrared (NIR)-fluorescence imaging is widely recognized as an effective method for high-resolution and highsensitivity bioimaging because of its minimized biological autofluorescence background and the increased penetration of excitation and emission light through tissues in the NIR wavelength window (700–900 nm). There have been tremendous efforts to develop high-efficiency fluorescent biological probes for NIR-fluorescence imaging. Semiconductor quantum dots (QDs) have attracted much recent attention as a new generation of fluorescent probes because of their unique optical properties such as strong luminescence, high photostability, and size-tunable emission wavelength. While QDs emitting in the range of 450–650 nm have been well developed, NIR-emitting QDs have been much less explored because of their relatively complicated synthesis and post-treatment manipulations. Furthermore, NIR-emitting QDs are usually prepared in organic phase, and additional surface modification is employed to render them waterdispersible for biological applications. The relatively complicated surface modification often results in an increase in size of the QDs. Only recently, water-dispersed NIRemitting CdTe/CdS QDs with tetrahedral structure were directly prepared in aqueous phase through the epitaxialshell-growth method. Despite these advances, much work is still needed to obtain NIR-emitting QDs that can be facilely synthesized in aqueous phase for high-sensitivity and specific bioimaging. Herein, we report the first example of ultrasmall-sized NIR-emitting CdTe QDs with excellent aqueous dispersibility, robust storage, chemical, and photostability, and strong photoluminescence (photoluminescent quantum yield (PLQY): 15–20%). Significantly, the NIR QDs are directly synthesized in aqueous phase through a facile one-step microwave-assisted method (see the Supporting Information for experimental details and mechanisms) by utilizing several attractive properties of microwave irradiation such as prompt startup, easy heat control (on and off), prompt and homogeneous heating, and so forth. More importantly, highly spectrally and spatially resolved bioimaging was possible, and efficient tumor passive targeting in live mice was shown by using the prepared QDs. QDs with different emission wavelengths in the NIR range (lmax= 700–800 nm) can be readily prepared through fine adjustment of the experimental conditions (e.g., reaction time and temperature). Figure 1a,b displays the normalized ultraviolet photoluminescence (UV-PL) spectra for a series of as-prepared QDs with controllable maximum emission wavelength ranging from 700 to 800 nm in aqueous solution. Such QD solutions are transparent under ambient light conditions, suggesting the as-prepared QDs are well-dispersed in aqueous phase without further treatment (Figure 1c). The excellent aqueous dispersibility of the QDs arises from the surfacecovering mercaptopropionic acid (MPA) that acts as a stabilizer because of the presence of negatively charged carboxylic groups. Under UV irradiation the fluorescence of the as-prepared QDs became darker and the emission wavelength gradually shifted out of the visible region (Figure 1d). The transmission electron microscopy (TEM) and highresolution TEM (HRTEM) images reveal that the NIRemitting QDs are spherical particles with good monodispersibility (Figure 2a,b). The existence of a well-resolved crystal lattice in the HRTEM image further confirms the highly crystalline structures of the QDs (Figure 2b inset). Furthermore, the size distribution histogram (Figure 2c), which was determined by measuring more than 250 particles, shows that the average size and standard deviation of the as-prepared NIR-emitting QDs is (3.74 0.67) nm. Comparatively, the [*] Prof. Y. He, Y. L. Zhong, Dr. Y. Y. Su, Y. M. Lu, Z. Y. Jiang, F. Peng, T. T. Xu, Dr. S. Su Institute of Functional Nano & Soft Materials (FUNSOM) and Jiangsu Key Laboratory for Carbon-Based Functional Materials & Devices, Soochow University Suzhou, Jiangsu 215123 (China) Fax: (+86)512-6588-2846 E-mail: yaohe@suda.edu.cn

Semiconductor nanowires from oxides

Abstract: Highly pure, ultralong, and uniform-sized semiconductor nanowires in bulk quantity were synthesized by thermal evaporation or laser ablation of semiconductor powders mixed with oxides. Transmission electron microscopy study shows that decomposition of semiconductor suboxides and defect structures play important roles in enhancing the formation and growth of high-quality nanowires. A new growth mechanism is proposed on the basis of microstructure and different morphologies of the nanowires observed.

Improved performance of electroluminescent devices based on an europium complex

Abstract: Electroluminescent (EL) devices using an europium complex Eu(DBM)3 bath as the electron-transport emitting layer were fabricated. The quenching effect of the metal cathode and the unstable nature of the Eu complex under EL operation markedly influence the EL efficiency. By keeping the emitting area far from the metal cathode and partly doping the Eu(DBM)3 bath layer with a hole-transport material, the EL performance was significantly improved. Sharp-band red emissions with turn-on voltage of 3 V, brightness of 820 cd/m2, and external quantum efficiency of 1% were achieved.

Light Manipulation for Organic Optoelectronics Using Bio-inspired Moth's Eye Nanostructures

Abstract: Organic-based optoelectronic devices, including light-emitting diodes (OLEDs) and solar cells (OSCs) hold great promise as low-cost and large-area electro-optical devices and renewable energy sources. However, further improvement in efficiency remains a daunting challenge due to limited light extraction or absorption in conventional device architectures. Here we report a universal method of optical manipulation of light by integrating a dual-side bio-inspired moth's eye nanostructure with broadband anti-reflective and quasi-omnidirectional properties. Light out-coupling efficiency of OLEDs with stacked triple emission units is over 2 times that of a conventional device, resulting in drastic increase in external quantum efficiency and current efficiency to 119.7% and 366 cd A−1 without introducing spectral distortion and directionality. Similarly, the light in-coupling efficiency of OSCs is increased 20%, yielding an enhanced power conversion efficiency of 9.33%. We anticipate this method would offer a convenient and scalable way for inexpensive and high-efficiency organic optoelectronic designs.

Synthesis and Lasing Properties of Highly Ordered CdS Nanowire Arrays

Abstract: Highly ordered large-area arrays of wurtzite CdS nanowires are synthesized on Cd-foil substrates via a simple liquid reaction route using thiosemicarbazide and Cd foil as the starting materials. The CdS nanowires are single crystals growing along the [001] direction and are perpendicular to the surface of the substrate. The characteristic Raman peaks of CdS are red-shifted and show asymmetric broadening, which is ascribed to phonon confinement effects arising from the nanoscale dimensions of the nanowires. Significantly, the uniform CdS nanowire arrays can act as laser cavities in the visible-light range, leading to bandgap lasing at ca. 515 nm with obvious modes. The high density of nuclei and the preferential growth direction induce the formation of aligned CdS nanowires on the metal substrate.

A roadmap for graphene

Abstract: Recent years have witnessed many breakthroughs in research on graphene (the first two-dimensional atomic crystal) as well as a significant advance in the mass production of this material. This one-atom-thick fabric of carbon uniquely combines extreme mechanical strength, exceptionally high electronic and thermal conductivities, impermeability to gases, as well as many other supreme properties, all of which make it highly attractive for numerous applications. Here we review recent progress in graphene research and in the development of production methods, and critically analyse the feasibility of various graphene applications.

High-performance lithium battery anodes using silicon nanowires

Abstract: There is great interest in developing rechargeable lithium batteries with higher energy capacity and longer cycle life for applications in portable electronic devices, electric vehicles and implantable medical devices. Silicon is an attractive anode material for lithium batteries because it has a low discharge potential and the highest known theoretical charge capacity (4,200 mAh g(-1); ref. 2). Although this is more than ten times higher than existing graphite anodes and much larger than various nitride and oxide materials, silicon anodes have limited applications because silicon's volume changes by 400% upon insertion and extraction of lithium which results in pulverization and capacity fading. Here, we show that silicon nanowire battery electrodes circumvent these issues as they can accommodate large strain without pulverization, provide good electronic contact and conduction, and display short lithium insertion distances. We achieved the theoretical charge capacity for silicon anodes and maintained a discharge capacity close to 75% of this maximum, with little fading during cycling.

Nanobelts of Semiconducting Oxides

Abstract: Ultralong beltlike (or ribbonlike) nanostructures (so-called nanobelts) were successfully synthesized for semiconducting oxides of zinc, tin, indium, cadmium, and gallium by simply evaporating the desired commercial metal oxide powders at high temperatures. The as-synthesized oxide nanobelts are pure, structurally uniform, and single crystalline, and most of them are free from defects and dislocations. They have a rectanglelike cross section with typical widths of 30 to 300 nanometers, width-to-thickness ratios of 5 to 10, and lengths of up to a few millimeters. The beltlike morphology appears to be a distinctive and common structural characteristic for the family of semiconducting oxides with cations of different valence states and materials of distinct crystallographic structures. The nanobelts could be an ideal system for fully understanding dimensionally confined transport phenomena in functional oxides and building functional devices along individual nanobelts.

Raman spectroscopy as a versatile tool for studying the properties of graphene

Abstract: Raman spectroscopy is an integral part of graphene research. It is used to determine the number and orientation of layers, the quality and types of edge, and the effects of perturbations, such as electric and magnetic fields, strain, doping, disorder and functional groups. This, in turn, provides insight into all sp(2)-bonded carbon allotropes, because graphene is their fundamental building block. Here we review the state of the art, future directions and open questions in Raman spectroscopy of graphene. We describe essential physical processes whose importance has only recently been recognized, such as the various types of resonance at play, and the role of quantum interference. We update all basic concepts and notations, and propose a terminology that is able to describe any result in literature. We finally highlight the potential of Raman spectroscopy for layered materials other than graphene.

Aggregation-Induced Emission: Together We Shine, United We Soar!

Abstract: Ju Mei,†,‡,∥ Nelson L. C. Leung,†,‡,∥ Ryan T. K. Kwok,†,‡ Jacky W. Y. Lam,†,‡ and Ben Zhong Tang*,†,‡,§ †HKUST-Shenzhen Research Institute, Hi-Tech Park, Nanshan, Shenzhen 518057, China ‡Department of Chemistry, HKUST Jockey Club Institute for Advanced Study, Institute of Molecular Functional Materials, Division of Biomedical Engineering, State Key Laboratory of Molecular Neuroscience, Division of Life Science, The Hong Kong University of Science and Technology, Clear Water Bay, Kowloon, Hong Kong, China Guangdong Innovative Research Team, SCUT-HKUST Joint Research Laboratory, State Key Laboratory of Luminescent Materials and Devices, South China University of Technology, Guangzhou 510640, China