Shuit-Tong Lee

Bio: Shuit-Tong Lee is an academic researcher from Soochow University (Suzhou). The author has contributed to research in topics: Silicon & Nanowire. The author has an hindex of 138, co-authored 1121 publications receiving 77112 citations. Previous affiliations of Shuit-Tong Lee include University of British Columbia & Hong Kong University of Science and Technology.

Effective organic-based connection unit for stacked organic light-emitting devices

Abstract: A bilayer connection unit of Mg-doped Alq3 and F4-TCNQ-doped m-MTDATA was investigated for application in stacked organic light-emitting device. This connection unit led to a stacked OLED with a luminous efficiency twice that of a single-unit OLED. Electronic structures, including relevant electron energy levels, of the various interfaces in the stacked OLED were studied by using ultraviolet photoemission spectroscopy and used to discuss the working mechanisms of the stacked OLED. The p-type dopant F4-TCNQ was shown to induce a large band bending of 1.36eV and facilitates efficient carrier injection from the connection units into the carrier-transporting layers.

High-Performance Photoelectrochemical Cells from Ionic Liquid Electrolyte in Methyl-Terminated Silicon Nanowire Arrays

Abstract: Photoelectrochemical (PEC) cells based on silicon nanowire arrays (SiNWs) have, to date, exhibited modest power conversion efficiency (PCE) and suffered serious degradation, though they exhibit advantageous properties of charge-transfer/transport properties at the radial-junction and strong light-trap capabilities. The main challenge for this low-cost PEC cell is the surface photooxidation and photocorrosion of the silicon surface when contacting with the electrolyte. In this report, SiNWs derivatized with covalently attached methyl groups, prepared via a two-step chlorination/methylation procedure, demonstrate excellent stability even in the presence of water. Furthermore, SiNWs PEC cells utilizing a room temperature ion liquid (IL) acting as an electrolyte solvent display neglectable surface oxidation. A PEC cell based on a platinum (Pt) nanodots decorated and methylated (−CH3) SiNWs electrode in combination with an IL electrolyte yields a PCE of 6.0% and shows excellent stability under simulated air ma...

Solution‐Processed Extremely Efficient Multicolor Perovskite Light‐Emitting Diodes Utilizing Doped Electron Transport Layer

Abstract: A specially designed n-type semiconductor consisting of Ca-doped ZnO (CZO) nanoparticles is used as the electron transport layer (ETL) in high-performance multicolor perovskite light-emitting diodes (PeLEDs) fabricated using an all-solution process. The band structure of the ZnO is tailored via Ca doping to create a cascade of conduction energy levels from the cathode to the perovskite. This energy band alignment significantly enhances conductivity and carrier mobility in the CZO ETL and enables controlled electron injection, giving rise to sub-bandgap turn-on voltages of 1.65 V for red emission, 1.8 V for yellow, and 2.2 V for green. The devices exhibit significantly improved luminance yields and external quantum efficiencies of, respectively, 19 cd A−1 and 5.8% for red emission, 16 cd A−1 and 4.2% for yellow, and 21 cd A−1 and 6.2% for green. The power efficiencies of these multicolor devices demonstrated in this study, 30 lm W−1 for green light-emitting PeLED, 28 lm W−1 for yellow, and 36 lm W−1 for red are the highest to date reported. In addition, the perovskite layers are fabricated using a two-step hot-casting technique that affords highly continuous (>95% coverage) and pinhole-free thin films. By virtue of the efficiency of the ETL and the uniformity of the perovskite film, high brightnesses of 10 100, 4200, and 16,060 cd m−2 are demonstrated for red, yellow, and green PeLEDs, respectively. The strategy of using a tunable ETL in combination with a solution process pushes perovskite-based materials a step closer to practical application in multicolor light-emitting devices.

Analysis of Silicon Nanowires Grown by Combining SiO Evaporation with the VLS Mechanism

Abstract: Silicon nanowires have received increasing attention as potential building blocks for nanoscale devices. We report the growth and analysis of silicon nanowires consisting of a crystalline silicon core and a thick oxide shell, which were grown by evaporation of silicon monoxide (SiO) in an inert gas atmosphere using a gold-coated silicon wafer as a substrate. This method combines SiO evaporation with the vapor-liquid-solid (VLS) nanowire growth mechanism. The resulting nanowires were analyzed using scanning electron microscopy, transmission electron microscopy (TEM), and energy-dispersive X-ray spectroscopy (EDXS). The thick oxide shell was determined to be the product of the SiO evaporation and subsequent phase separation into Si and SiO 2 . The EDXS measurements confirmed the silicon core/oxide shell structure of the nanowires and the existence of a gold dot on the nanowire tip as required by the VLS mechanism. An explanation is proposed for growth of the nanowires by combination of the VLS mechanism and SiO disproportionation. High-resolution TEM micrographs show the crystalline structure of the nanowire silicon core. Some of the nanowires were found to show an oscillation in diameter.

Silicon nanowire-based molecular beacons for high-sensitivity and sequence-specific DNA multiplexed analysis.

Abstract: Nanomaterial-based molecular beacons (nanoMBs) have been extensively explored due to unique merits of nanostructures, including gold nanoparticle (AuNP)-, carbon nanotube (CNT)-, and graphene-based nanoMBs. Those nanoMBs are well-studied; however, they possess relatively poor salt stability or low specificity, limiting their wide applications. Here, we present a novel kind of multicolor silicon-based nanoMBs by using AuNP-decorated silicon nanowires as high-performance quenchers. Significantly, the nanoMBs feature robust stability in high-concentration (0.1 M) salt solution and wide-ranging temperature (10-80 °C), high quenching efficiency (>90%) for various fluorophores (e.g., FAM, Cy5, and ROX), and large surfaces for simultaneous assembly of different DNA strands. We further show that silicon-based nanoMBs are highly effective for sensitive and specific multidetection of DNA targets. The unprecedented advantages of silicon-based multicolor nanoMBs would bring new opportunities for challenging bioapplications, such as allele discrimination, early cancer diagnosis, and molecular engineering, etc.

A roadmap for graphene

Abstract: Recent years have witnessed many breakthroughs in research on graphene (the first two-dimensional atomic crystal) as well as a significant advance in the mass production of this material. This one-atom-thick fabric of carbon uniquely combines extreme mechanical strength, exceptionally high electronic and thermal conductivities, impermeability to gases, as well as many other supreme properties, all of which make it highly attractive for numerous applications. Here we review recent progress in graphene research and in the development of production methods, and critically analyse the feasibility of various graphene applications.

High-performance lithium battery anodes using silicon nanowires

Abstract: There is great interest in developing rechargeable lithium batteries with higher energy capacity and longer cycle life for applications in portable electronic devices, electric vehicles and implantable medical devices. Silicon is an attractive anode material for lithium batteries because it has a low discharge potential and the highest known theoretical charge capacity (4,200 mAh g(-1); ref. 2). Although this is more than ten times higher than existing graphite anodes and much larger than various nitride and oxide materials, silicon anodes have limited applications because silicon's volume changes by 400% upon insertion and extraction of lithium which results in pulverization and capacity fading. Here, we show that silicon nanowire battery electrodes circumvent these issues as they can accommodate large strain without pulverization, provide good electronic contact and conduction, and display short lithium insertion distances. We achieved the theoretical charge capacity for silicon anodes and maintained a discharge capacity close to 75% of this maximum, with little fading during cycling.

Nanobelts of Semiconducting Oxides

Abstract: Ultralong beltlike (or ribbonlike) nanostructures (so-called nanobelts) were successfully synthesized for semiconducting oxides of zinc, tin, indium, cadmium, and gallium by simply evaporating the desired commercial metal oxide powders at high temperatures. The as-synthesized oxide nanobelts are pure, structurally uniform, and single crystalline, and most of them are free from defects and dislocations. They have a rectanglelike cross section with typical widths of 30 to 300 nanometers, width-to-thickness ratios of 5 to 10, and lengths of up to a few millimeters. The beltlike morphology appears to be a distinctive and common structural characteristic for the family of semiconducting oxides with cations of different valence states and materials of distinct crystallographic structures. The nanobelts could be an ideal system for fully understanding dimensionally confined transport phenomena in functional oxides and building functional devices along individual nanobelts.

Raman spectroscopy as a versatile tool for studying the properties of graphene

Abstract: Raman spectroscopy is an integral part of graphene research. It is used to determine the number and orientation of layers, the quality and types of edge, and the effects of perturbations, such as electric and magnetic fields, strain, doping, disorder and functional groups. This, in turn, provides insight into all sp(2)-bonded carbon allotropes, because graphene is their fundamental building block. Here we review the state of the art, future directions and open questions in Raman spectroscopy of graphene. We describe essential physical processes whose importance has only recently been recognized, such as the various types of resonance at play, and the role of quantum interference. We update all basic concepts and notations, and propose a terminology that is able to describe any result in literature. We finally highlight the potential of Raman spectroscopy for layered materials other than graphene.

Aggregation-Induced Emission: Together We Shine, United We Soar!

Abstract: Ju Mei,†,‡,∥ Nelson L. C. Leung,†,‡,∥ Ryan T. K. Kwok,†,‡ Jacky W. Y. Lam,†,‡ and Ben Zhong Tang*,†,‡,§ †HKUST-Shenzhen Research Institute, Hi-Tech Park, Nanshan, Shenzhen 518057, China ‡Department of Chemistry, HKUST Jockey Club Institute for Advanced Study, Institute of Molecular Functional Materials, Division of Biomedical Engineering, State Key Laboratory of Molecular Neuroscience, Division of Life Science, The Hong Kong University of Science and Technology, Clear Water Bay, Kowloon, Hong Kong, China Guangdong Innovative Research Team, SCUT-HKUST Joint Research Laboratory, State Key Laboratory of Luminescent Materials and Devices, South China University of Technology, Guangzhou 510640, China