scispace - formally typeset
Search or ask a question
Author

Shuit-Tong Lee

Bio: Shuit-Tong Lee is an academic researcher from Soochow University (Suzhou). The author has contributed to research in topics: Silicon & Nanowire. The author has an hindex of 138, co-authored 1121 publications receiving 77112 citations. Previous affiliations of Shuit-Tong Lee include University of British Columbia & Hong Kong University of Science and Technology.
Topics: Silicon, Nanowire, OLED, Electroluminescence, Diamond


Papers
More filters
Journal ArticleDOI
TL;DR: An effective optical spacer based on doping of ytterbium (Yb) metal into bathophenanthroline (BPhen) has been developed for applications in organic photovoltaic (OPV) devices as discussed by the authors.
Abstract: An effective optical spacer based on doping of ytterbium (Yb) metal into bathophenanthroline (BPhen) has been developed for applications in organic photovoltaic (OPV) devices. Utilizing Yb:BPhen as an optical spacer in standard copper phthalocyanine/C60 photovoltaic devices, power efficiency can be increased by four times to 3.42%. Ultraviolet photoemission spectroscopy measurements reveal that the good electron transport between C60 and Yb:BPhen is mainly related to the suitable energy level alignment at the interface. Combining with its high optical transparency and electrical conductivity, the Yb:BPhen film provides a useful means for maximizing the power conversion efficiency of OPV devices.

65 citations

Journal ArticleDOI
TL;DR: In this article, a sandwich-like nanocomposite was synthesized by planting rutile TiO2 nanorods onto reduced graphene oxide (RGO) via a modified seed-assisted hydrothermal growth method.
Abstract: We demonstrate the synthesis of a sandwich-like nanocomposite by planting rutile TiO2 nanorods onto reduced graphene oxide (RGO) via a modified seed-assisted hydrothermal growth method. The synthetic process consists of functionalization of graphene oxide (GO), followed by hydrolytic deposition of TiO2 nanoparticles on GO and reduction, and finally hydrothermal growth of rutile TiO2 nanorods on RGO. The resultant nanocomposite, i.e. rutile TiO2 nanorod arrays on RGO (TONRAs–RGO), exhibits largely enhanced reversible charge–discharge capacity and rate capability compared to bare TiO2 nanorods (TONRs) due to its unique structure and superior conductivity. The rate performance of the nanocomposite is also better than that of anatase TiO2 nanoparticles. This study will inspire better design of RGO-based nanocomposites for high energy density lithium-ion battery applications.

64 citations

Journal ArticleDOI
TL;DR: In this article, the high resolution photoelectron spectrum of CS has been obtained and the ionization potentials are found at 11.34 (X2Σ), 12.78 (A2Π), 15.83 (B2ε), and 18.03 (C2ε) eV.

64 citations

Journal ArticleDOI
TL;DR: The amorphous boron-carbon-nitrogen (BCN) films were deposited by RF magnetron sputtering from a mixed target composed of h-BN and graphite as discussed by the authors.

64 citations

Journal ArticleDOI
TL;DR: In this paper, field effect transistors made of individual CdSe nanoribbons were fabricated and characterized and showed high sensitivity to above-bandgap irradiation with four orders of magnitude increase in conductance and millisecond response speed.
Abstract: Field-effect transistors made of individual CdSe nanoribbons were fabricated and characterized. The CdSe nanoribbon showed n-type semiconducting characteristics, while the transistors revealed a threshold voltage of 20.9V, an on-off ratio >104, and an electron mobility of 9.6cm2∕Vs in the dark. CdSe nanoribbons showed high sensitivity to above-band-gap irradiation with four-orders-of-magnitude increase in conductance and millisecond response speed. The increase of electron mobility due to light irradiation was demonstrated to contribute to increased photoconductance.

64 citations


Cited by
More filters
Journal ArticleDOI
11 Oct 2012-Nature
TL;DR: This work reviews recent progress in graphene research and in the development of production methods, and critically analyse the feasibility of various graphene applications.
Abstract: Recent years have witnessed many breakthroughs in research on graphene (the first two-dimensional atomic crystal) as well as a significant advance in the mass production of this material. This one-atom-thick fabric of carbon uniquely combines extreme mechanical strength, exceptionally high electronic and thermal conductivities, impermeability to gases, as well as many other supreme properties, all of which make it highly attractive for numerous applications. Here we review recent progress in graphene research and in the development of production methods, and critically analyse the feasibility of various graphene applications.

7,987 citations

Journal ArticleDOI
TL;DR: The theoretical charge capacity for silicon nanowire battery electrodes is achieved and maintained a discharge capacity close to 75% of this maximum, with little fading during cycling.
Abstract: There is great interest in developing rechargeable lithium batteries with higher energy capacity and longer cycle life for applications in portable electronic devices, electric vehicles and implantable medical devices. Silicon is an attractive anode material for lithium batteries because it has a low discharge potential and the highest known theoretical charge capacity (4,200 mAh g(-1); ref. 2). Although this is more than ten times higher than existing graphite anodes and much larger than various nitride and oxide materials, silicon anodes have limited applications because silicon's volume changes by 400% upon insertion and extraction of lithium which results in pulverization and capacity fading. Here, we show that silicon nanowire battery electrodes circumvent these issues as they can accommodate large strain without pulverization, provide good electronic contact and conduction, and display short lithium insertion distances. We achieved the theoretical charge capacity for silicon anodes and maintained a discharge capacity close to 75% of this maximum, with little fading during cycling.

6,104 citations

Journal ArticleDOI
09 Mar 2001-Science
TL;DR: The beltlike morphology appears to be a distinctive and common structural characteristic for the family of semiconducting oxides with cations of different valence states and materials of distinct crystallographic structures, which could be an ideal system for fully understanding dimensionally confined transport phenomena in functional oxides.
Abstract: Ultralong beltlike (or ribbonlike) nanostructures (so-called nanobelts) were successfully synthesized for semiconducting oxides of zinc, tin, indium, cadmium, and gallium by simply evaporating the desired commercial metal oxide powders at high temperatures. The as-synthesized oxide nanobelts are pure, structurally uniform, and single crystalline, and most of them are free from defects and dislocations. They have a rectanglelike cross section with typical widths of 30 to 300 nanometers, width-to-thickness ratios of 5 to 10, and lengths of up to a few millimeters. The beltlike morphology appears to be a distinctive and common structural characteristic for the family of semiconducting oxides with cations of different valence states and materials of distinct crystallographic structures. The nanobelts could be an ideal system for fully understanding dimensionally confined transport phenomena in functional oxides and building functional devices along individual nanobelts.

5,677 citations

Journal ArticleDOI
TL;DR: The state of the art, future directions and open questions in Raman spectroscopy of graphene are reviewed, and essential physical processes whose importance has only recently been recognized are described.
Abstract: Raman spectroscopy is an integral part of graphene research. It is used to determine the number and orientation of layers, the quality and types of edge, and the effects of perturbations, such as electric and magnetic fields, strain, doping, disorder and functional groups. This, in turn, provides insight into all sp(2)-bonded carbon allotropes, because graphene is their fundamental building block. Here we review the state of the art, future directions and open questions in Raman spectroscopy of graphene. We describe essential physical processes whose importance has only recently been recognized, such as the various types of resonance at play, and the role of quantum interference. We update all basic concepts and notations, and propose a terminology that is able to describe any result in literature. We finally highlight the potential of Raman spectroscopy for layered materials other than graphene.

5,673 citations

Journal ArticleDOI
TL;DR: This paper presents a meta-analysis of the chiral stationary phase transition of Na6(CO3)(SO4)2, a major component of the response of the immune system to Na2CO3.
Abstract: Ju Mei,†,‡,∥ Nelson L. C. Leung,†,‡,∥ Ryan T. K. Kwok,†,‡ Jacky W. Y. Lam,†,‡ and Ben Zhong Tang*,†,‡,§ †HKUST-Shenzhen Research Institute, Hi-Tech Park, Nanshan, Shenzhen 518057, China ‡Department of Chemistry, HKUST Jockey Club Institute for Advanced Study, Institute of Molecular Functional Materials, Division of Biomedical Engineering, State Key Laboratory of Molecular Neuroscience, Division of Life Science, The Hong Kong University of Science and Technology, Clear Water Bay, Kowloon, Hong Kong, China Guangdong Innovative Research Team, SCUT-HKUST Joint Research Laboratory, State Key Laboratory of Luminescent Materials and Devices, South China University of Technology, Guangzhou 510640, China

5,658 citations