Shunbin Lu

Bio: Shunbin Lu is an academic researcher from Shenzhen University. The author has contributed to research in topics: Saturable absorption & Photonics. The author has an hindex of 20, co-authored 38 publications receiving 4722 citations. Previous affiliations of Shunbin Lu include Hunan University & National University of Singapore.

Molybdenum disulfide (MoS_2) as a broadband saturable absorber for ultra-fast photonics

Abstract: The nonlinear optical property of few-layered MoS2 nanoplatelets synthesized by the hydrothermal exfoliation method was investigated from the visible to the near-infrared band using lasers. Both open-aperture Z-scan and balanced-detector measurement techniques were used to demonstrate the broadband saturable absorption property of few-layered MoS2. To explore its potential applications in ultrafast photonics, we fabricated a passive mode locker for ytterbium-doped fibre laser by depositing few-layered MoS2 onto the end facet of optical fiber by means of an optical trapping approach. Our laser experiment shows that few-layer MoS2-based mode locker allows for the generation of stable mode-locked laser pulse, centered at 1054.3 nm, with a 3-dB spectral bandwidth of 2.7 nm and a pulse duration of 800 ps. Our finding suggests that few-layered MoS2 nanoplatelets can be useful nonlinear optical material for laser photonics devices, such as passive laser mode locker, Q-switcher, optical limiter, optical switcher and so on.

From Black Phosphorus to Phosphorene: Basic Solvent Exfoliation, Evolution of Raman Scattering, and Applications to Ultrafast Photonics

Abstract: Although phosphorene has attracted much attention in electronics and optoelectronics as a new type of two-dimensional material, in-depth investigations and applications have been limited by the current synthesis techniques. Herein, a basic N-methyl-2-pyrrolidone (NMP) liquid exfoliation method is described to produce phosphorene with excellent water stability, controllable size and layer number, as well as in high yield. Phosphorene samples composed of one to four layers exhibit layer-dependent Raman scattering characteristics thus providing a fast and efficient means for the in situ determination of the thickness (layer number) of phosphorene. The linear and nonlinear ultrafast absorption behavior of the as-exfoliated phosphorene is investigated systematically by UV–vis–NIR absorption and Z-scan measurements. By taking advantage of their unique nonlinear absorption, ultrashort pulse generation applicable to optical saturable absorbers is demonstrated. In addition to a unique fabrication technique, our work also reveals the large potential of phosphorene in ultrafast photonics.

Broadband nonlinear optical response in multi-layer black phosphorus: an emerging infrared and mid-infrared optical material

Abstract: Black phosphorous (BP), the most thermodynamically stable allotrope of phosphorus, is a high-mobility layered semiconductor with direct band-gap determined by the number of layers from 0.3 eV (bulk) to 2.0 eV (single layer). Therefore, BP is considered as a natural candidate for broadband optical applications, particularly in the infrared (IR) and mid-IR part of the spectrum. The strong light-matter interaction, narrow direct band-gap, and wide range of tunable optical response make BP as a promising nonlinear optical material, particularly with great potentials for infrared and mid-infrared opto-electronics. Herein, we experimentally verified its broadband and enhanced saturable absorption of multi-layer BP (with a thickness of ~10 nm) by wide-band Z-scan measurement technique, and anticipated that multi-layer BPs could be developed as another new type of two-dimensional saturable absorber with operation bandwidth ranging from the visible (400 nm) towards mid-IR (at least 1930 nm). Our results might suggest that ultra-thin multi-layer BP films could be potentially developed as broadband ultra-fast photonics devices, such as passive Q-switcher, mode-locker, optical switcher etc.

Wavelength-tunable picosecond soliton fiber laser with Topological Insulator: Bi2Se3 as a mode locker.

Abstract: Based on the open-aperture Z-scan measurement, we firstly uncovered the saturable absorption property of the topological insulator (TI): Bi2Se3. A high absolute modulation depth up to 98% and a saturation intensity of 0.49 GWcm−2 were identified. By incorporating this novel saturable absorber material into an erbium-doped fiber laser, wavelength tunable soliton operation was experimentally demonstrated. Our result indicates that like the atomic layer graphene, the topological insulator Bi2Se3 could also operate as an effective saturable absorber for the passive mode locking of lasers at the telecommunication band.

Sensitivity enhancement by using few-layer black phosphorus-graphene/TMDCs heterostructure in surface plasmon resonance biochemical sensor

Abstract: The heterostructure of two-dimensional (2D) materials are promising and useful in the field of surface plasmon resonance (SPR) biochemical sensors. To enhance the sensitivity, we design a novel SPR biochemical sensor by using heterostructures of few-layer black phosphorus (BP) and graphene/transition metal dichalcogenides (TMDCs). The SPR biochemical sensor based on the different heterostructures of BP and graphene/TMDCs are analyzed, and the highest sensitivity with 279°/RIU for the heterostructure of BP and bilayer WSe2 is obtained. Moreover, the proposed biochemical sensor can be used to detect the analyte with different refractive index. The most prominent advantage of the proposed structure is its high sensitivity. The maximum sensitivity of our proposed SPR biochemical sensor is about 2.4 times of the conventional biochemical sensor. We believe that this biochemical sensor could find potential applications in chemical examination, medical diagnosis and biological detection.

Recent Advances in Ultrathin Two-Dimensional Nanomaterials

Abstract: Since the discovery of mechanically exfoliated graphene in 2004, research on ultrathin two-dimensional (2D) nanomaterials has grown exponentially in the fields of condensed matter physics, material science, chemistry, and nanotechnology. Highlighting their compelling physical, chemical, electronic, and optical properties, as well as their various potential applications, in this Review, we summarize the state-of-art progress on the ultrathin 2D nanomaterials with a particular emphasis on their recent advances. First, we introduce the unique advances on ultrathin 2D nanomaterials, followed by the description of their composition and crystal structures. The assortments of their synthetic methods are then summarized, including insights on their advantages and limitations, alongside some recommendations on suitable characterization techniques. We also discuss in detail the utilization of these ultrathin 2D nanomaterials for wide ranges of potential applications among the electronics/optoelectronics, electrocat...

Science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems

Abstract: We present the science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems, targeting an evolution in technology, that might lead to impacts and benefits reaching into most areas of society. This roadmap was developed within the framework of the European Graphene Flagship and outlines the main targets and research areas as best understood at the start of this ambitious project. We provide an overview of the key aspects of graphene and related materials (GRMs), ranging from fundamental research challenges to a variety of applications in a large number of sectors, highlighting the steps necessary to take GRMs from a state of raw potential to a point where they might revolutionize multiple industries. We also define an extensive list of acronyms in an effort to standardize the nomenclature in this emerging field.

Optical modulators with 2D layered materials

Abstract: Light modulation is an essential operation in photonics and optoelectronics. With existing and emerging technologies increasingly demanding compact, efficient, fast and broadband optical modulators, high-performance light modulation solutions are becoming indispensable. The recent realization that 2D layered materials could modulate light with superior performance has prompted intense research and significant advances, paving the way for realistic applications. In this Review, we cover the state of the art of optical modulators based on 2D materials, including graphene, transition metal dichalcogenides and black phosphorus. We discuss recent advances employing hybrid structures, such as 2D heterostructures, plasmonic structures, and silicon and fibre integrated structures. We also take a look at the future perspectives and discuss the potential of yet relatively unexplored mechanisms, such as magneto-optic and acousto-optic modulation.

Metal-Free Photocatalyst for H2 Evolution in Visible to Near-Infrared Region: Black Phosphorus/Graphitic Carbon Nitride

Abstract: In the drive toward green and sustainable chemistry, exploring efficient and stable metal-free photocatalysts with broadband solar absorption from the UV to near-infrared region for the photoreduction of water to H2 remains a big challenge. To this end, a binary nanohybrid (BP/CN) of two-dimensional (2D) black phosphorus (BP) and graphitic carbon nitride (CN) was designed and used as a metal-free photocatalyst for the first time. During irradiation of BP/CN in water with >420 and >780 nm light, solid H2 gas was generated, respectively. Owing to the interfacial interaction between BP and CN, efficient charge transfer occurred, thereby enhancing the photocatalytic performance. The efficient charge-trapping and transfer processes were thoroughly investigated with time-resolved diffuse reflectance spectroscopic measurement. The present results show that BP/CN is a metal-free photocatalyst for artificial photosynthesis and renewable energy conversion.

Mechanically exfoliated black phosphorus as a new saturable absorber for both Q-switching and Mode-locking laser operation

Abstract: Black phosphorus (BP), an emerging narrow direct band-gap two-dimensional (2D) layered material that can fill the gap between the semi-metallic graphene and the wide-bandgap transition metal dichalcogenides (TMDs), had been experimentally found to exhibit the saturation of optical absorption if under strong light illumination. By taking advantage of this saturable absorption property, we could fabricate a new type of optical saturable absorber (SA) based on mechanically exfoliated BPs, and further demonstrate the applications for ultra-fast laser photonics. Based on the balanced synchronous twin-detector measurement method, we have characterized the saturable absorption property of the fabricated BP-SAs at the telecommunication band. By incorporating the BP-based SAs device into the all-fiber Erbium-doped fiber laser cavities, we are able to obtain either the passive Q-switching (with maximum pulse energy of 94.3 nJ) or the passive mode-locking operation (with pulse duration down to 946 fs). Our results show that BP could also be developed as an effective SA for pulsed fiber or solid-state lasers.