scispace - formally typeset
Search or ask a question
Author

Sidharta Gautama

Bio: Sidharta Gautama is an academic researcher from Ghent University. The author has contributed to research in topics: Graph (abstract data type) & Hyperspectral imaging. The author has an hindex of 20, co-authored 135 publications receiving 1621 citations.


Papers
More filters
Journal ArticleDOI
TL;DR: This paper highlights the two awarded research contributions, which investigated different approaches for the fusion of hyperspectral and LiDAR data, including a combined unsupervised and supervised classification scheme, and a graph-based method for the Fusion of spectral, spatial, and elevation information.
Abstract: The 2013 Data Fusion Contest organized by the Data Fusion Technical Committee (DFTC) of the IEEE Geoscience and Remote Sensing Society aimed at investigating the synergistic use of hyperspectral and Light Detection And Ranging (LiDAR) data. The data sets distributed to the participants during the Contest, a hyperspectral imagery and the corresponding LiDAR-derived digital surface model (DSM), were acquired by the NSF-funded Center for Airborne Laser Mapping over the University of Houston campus and its neighboring area in the summer of 2012. This paper highlights the two awarded research contributions, which investigated different approaches for the fusion of hyperspectral and LiDAR data, including a combined unsupervised and supervised classification scheme, and a graph-based method for the fusion of spectral, spatial, and elevation information.

379 citations

Journal ArticleDOI
TL;DR: The Contest was proposed as a double-track competition: one aiming at accurate landcover classification and the other seeking innovation in the fusion of thermal hyperspectral and color data, resulting in the results obtained by the winners of both tracks.
Abstract: This paper reports the outcomes of the 2014 Data Fusion Contest organized by the Image Analysis and Data Fusion Technical Committee (IADF TC) of the IEEE Geoscience and Remote Sensing Society (IEEE GRSS). As for previous years, the IADF TC organized a data fusion contest aiming at fostering new ideas and solutions for multisource remote sensing studies. In the 2014 edition, participants considered multiresolution and multisensor fusion between optical data acquired at 20-cm resolution and long-wave (thermal) infrared hyperspectral data at 1-m resolution. The Contest was proposed as a double-track competition: one aiming at accurate landcover classification and the other seeking innovation in the fusion of thermal hyperspectral and color data. In this paper, the results obtained by the winners of both tracks are presented and discussed.

209 citations

Journal ArticleDOI
TL;DR: In this letter, a generalized graph-based fusion method to couple dimension reduction and feature fusion of the spectral information (of the original HSI and MPs) and MPs (built on both HS and LiDAR data) is proposed, where the edges of the fusion graph are weighted by the distance between the stacked feature points.
Abstract: Nowadays, we have diverse sensor technologies and image processing algorithms that allow one to measure different aspects of objects on the Earth [e.g., spectral characteristics in hyperspectral images (HSIs), height in light detection and ranging (LiDAR) data, and geometry in image processing technologies, such as morphological profiles (MPs)]. It is clear that no single technology can be sufficient for a reliable classification, but combining many of them can lead to problems such as the curse of dimensionality, excessive computation time, and so on. Applying feature reduction techniques on all the features together is not good either, because it does not take into account the differences in structure of the feature spaces. Decision fusion, on the other hand, has difficulties with modeling correlations between the different data sources. In this letter, we propose a generalized graph-based fusion method to couple dimension reduction and feature fusion of the spectral information (of the original HSI) and MPs (built on both HS and LiDAR data). In the proposed method, the edges of the fusion graph are weighted by the distance between the stacked feature points. This yields a clear improvement over an older approach with binary edges in the fusion graph. Experimental results on real HSI and LiDAR data demonstrate effectiveness of the proposed method both visually and quantitatively.

136 citations

Journal ArticleDOI
TL;DR: This paper introduces two improvements on the use of morphological profiles by using linear SEs and shows that the addition of the line-based MP gives a substantial improvement of the classification result.
Abstract: Meter to submeter resolution satellite images have generated new interests in extracting man-made structures in the urban area. However, classification accuracies for such purposes are far from satisfactory. Spectral characteristics of urban land cover classes are so similar that they cannot be separated using only spectral information. As a result, there is an increased interest in incorporating geometrical information. One possible approach is the use of morphological profiles (MPs). In this paper, we introduce two improvements on the use of MPs. Current approaches use disk-shaped structuring elements (SEs) to derive an MP. This profile contains information about the minimum dimension of objects. In this paper, we extend this approach by using linear SEs. This results in a profile containing information about the maximum object dimension. We show that the addition of the line-based MP gives a substantial improvement of the classification result. A second improvement is achieved by using ldquopartial morphological reconstructionrdquo instead of the normal morphological reconstruction. Morphological reconstruction is commonly used to better preserve the shape of objects. However, we show that this leads to ldquoover-reconstructionrdquo in typical remote sensing images and a decreased classification performance. With ldquopartial reconstruction,rdquo we are able to overcome this problem and still preserve the shape of objects.

120 citations

Journal ArticleDOI
TL;DR: A comprehensive review of the recent development in air pollution monitoring, including both the pollution data acquisition and the pollution assessment methods, and presents the efforts of applying these models on the mobile sensing data and discusses the future research of fusing the stationary and mobile sensingData.
Abstract: The impact of urban air pollution on the environments and human health has drawn increasing concerns from researchers, policymakers and citizens. To reduce the negative health impact, it is of great importance to measure the air pollution at high spatial resolution in a timely manner. Traditionally, air pollution is measured using dedicated instruments at fixed monitoring stations, which are placed sparsely in urban areas. With the development of low-cost micro-scale sensing technology in the last decade, portable sensing devices installed on mobile campaigns have been increasingly used for air pollution monitoring, especially for traffic-related pollution monitoring. In the past, some reviews have been done about air pollution exposure models using monitoring data obtained from fixed stations, but no review about mobile sensing for air pollution has been undertaken. This article is a comprehensive review of the recent development in air pollution monitoring, including both the pollution data acquisition and the pollution assessment methods. Unlike the existing reviews on air pollution assessment, this paper not only introduces the models that researchers applied on the data collected from stationary stations, but also presents the efforts of applying these models on the mobile sensing data and discusses the future research of fusing the stationary and mobile sensing data.

114 citations


Cited by
More filters
01 Jan 2002

9,314 citations

Patent
06 Jun 1995
TL;DR: An adaptive interface for a programmable system, for predicting a desired user function, based on user history, as well as machine internal status and context, is presented for confirmation by the user, and the predictive mechanism is updated based on this feedback as mentioned in this paper.
Abstract: An adaptive interface for a programmable system, for predicting a desired user function, based on user history, as well as machine internal status and context. The apparatus receives an input from the user and other data. A predicted input is presented for confirmation by the user, and the predictive mechanism is updated based on this feedback. Also provided is a pattern recognition system for a multimedia device, wherein a user input is matched to a video stream on a conceptual basis, allowing inexact programming of a multimedia device. The system analyzes a data stream for correspondence with a data pattern for processing and storage. The data stream is subjected to adaptive pattern recognition to extract features of interest to provide a highly compressed representation which may be efficiently processed to determine correspondence. Applications of the interface and system include a VCR, medical device, vehicle control system, audio device, environmental control system, securities trading terminal, and smart house. The system optionally includes an actuator for effecting the environment of operation, allowing closed-loop feedback operation and automated learning.

1,976 citations

Journal ArticleDOI
TL;DR: Computer and Robot Vision Vol.
Abstract: Computer and Robot Vision Vol. 1, by R.M. Haralick and Linda G. Shapiro, Addison-Wesley, 1992, ISBN 0-201-10887-1.

1,426 citations

Journal ArticleDOI
01 Mar 2013
TL;DR: Recent advances in spectral-spatial classification of hyperspectral images are presented in this paper and several techniques are investigated for combining both spatial and spectral information.
Abstract: Recent advances in spectral-spatial classification of hyperspectral images are presented in this paper. Several techniques are investigated for combining both spatial and spectral information. Spatial information is extracted at the object (set of pixels) level rather than at the conventional pixel level. Mathematical morphology is first used to derive the morphological profile of the image, which includes characteristics about the size, orientation, and contrast of the spatial structures present in the image. Then, the morphological neighborhood is defined and used to derive additional features for classification. Classification is performed with support vector machines (SVMs) using the available spectral information and the extracted spatial information. Spatial postprocessing is next investigated to build more homogeneous and spatially consistent thematic maps. To that end, three presegmentation techniques are applied to define regions that are used to regularize the preliminary pixel-wise thematic map. Finally, a multiple-classifier (MC) system is defined to produce relevant markers that are exploited to segment the hyperspectral image with the minimum spanning forest algorithm. Experimental results conducted on three real hyperspectral images with different spatial and spectral resolutions and corresponding to various contexts are presented. They highlight the importance of spectral-spatial strategies for the accurate classification of hyperspectral images and validate the proposed methods.

1,225 citations

Patent
01 Feb 1999
TL;DR: An adaptive interface for a programmable system, for predicting a desired user function, based on user history, as well as machine internal status and context, is presented for confirmation by the user, and the predictive mechanism is updated based on this feedback as mentioned in this paper.
Abstract: An adaptive interface for a programmable system, for predicting a desired user function, based on user history, as well as machine internal status and context. The apparatus receives an input from the user and other data. A predicted input is presented for confirmation by the user, and the predictive mechanism is updated based on this feedback. Also provided is a pattern recognition system for a multimedia device, wherein a user input is matched to a video stream on a conceptual basis, allowing inexact programming of a multimedia device. The system analyzes a data stream for correspondence with a data pattern for processing and storage. The data stream is subjected to adaptive pattern recognition to extract features of interest to provide a highly compressed representation that may be efficiently processed to determine correspondence. Applications of the interface and system include a video cassette recorder (VCR), medical device, vehicle control system, audio device, environmental control system, securities trading terminal, and smart house. The system optionally includes an actuator for effecting the environment of operation, allowing closed-loop feedback operation and automated learning.

1,182 citations