Sie Chin Tjong

Bio: Sie Chin Tjong is an academic researcher from City University of Hong Kong. The author has contributed to research in topics: Ultimate tensile strength & Nanocomposite. The author has an hindex of 68, co-authored 430 publications receiving 18161 citations. Previous affiliations of Sie Chin Tjong include National Sun Yat-sen University & University of Manchester.

Microstructural and mechanical characteristics of in situ metal matrix composites

Abstract: During the past decade, considerable research effort has been directed towards the development of in situ metal matrix composites (MMCs), in which the reinforcements are formed in situ by exothermal reactions between elements or between elements and compounds. Using this approach, MMCs with a wide range of matrix materials (including aluminum, titanium, copper, nickel and iron), and second-phase particles (including borides, carbides, nitrides, oxides and their mixtures) have been produced. Because of the formation of ultrafine and stable ceramic reinforcements, the in situ MMCs are found to exhibit excellent mechanical properties. In this review article, current development on the fabrication, microstructure and mechanical properties of the composites reinforced with in situ ceramic phases will be addressed. Particular attention is paid to the mechanisms responsible for the formation of in situ reinforcements, and for creep failure of the aluminum-based matrix composites.

Structural and mechanical properties of polymer nanocomposites

Abstract: Recently, polymer nanocomposites reinforced with lower volume fraction of nanoceramics and carbon nanotubes have attracted steadily growing interest due to their peculiar and fascinating properties as well as their unique applications in commercial sectors. The incorporation of nanoceramics such as layered silicate clays, calcium carbonate or silica nanoparticles arranged on the nanometer scale with a high aspect ratio and/or an extremely large surface area into polymers improves their mechanical performances significantly. The properties of nanocomposites depend greatly on the chemistry of polymer matrices, nature of nanofillers, and the way in which they are prepared. The uniform dispersion of nanofillers in the polymer matrices is a general prerequisite for achieving desired mechanical and physical characteristics. In this review article, current development on the processing, structure, and mechanical properties of polymer nanocomposites reinforced with respective layered silicates, ceramic nanoparticles and carbon nanotubes will be addressed. Particular attention is paid on the structure–property relationship of such novel high-performance polymer nanocomposites.

Recent progress in the development and properties of novel metal matrix nanocomposites reinforced with carbon nanotubes and graphene nanosheets

Abstract: One-dimensional carbon nanotubes and two-dimensional graphene nanosheets with unique electrical, mechanical and thermal properties are attractive reinforcements for fabricating light weight, high strength and high performance metal-matrix composites. Rapid advances of nanotechnology in recent years enable the development of advanced metal matrix nanocomposites for structural engineering and functional device applications. This review focuses on the recent development in the synthesis, property characterization and application of aluminum, magnesium, and transition metal-based composites reinforced with carbon nanotubes and graphene nanosheets. These include processing strategies of carbonaceous nanomaterials and their composites, mechanical and tribological responses, corrosion, electrical and thermal properties as well as hydrogen storage and electrocatalytic behaviors. The effects of nanomaterial dispersion in the metal matrix and the formation of interfacial precipitates on these properties are also addressed. Particular attention is paid to the fundamentals and the structure–property relationships of such novel nanocomposites.

Nanocrystalline materials and coatings

Abstract: In recent years, near-nano (submicron) and nanostructured materials have attracted increasingly more attention from the materials community. Nanocrystalline materials are characterized by a microstructural length or grain size of up to about 100 nm. Materials having grain size of ∼0.1 to 0.3 μm are classified as submicron materials. Nanocrystalline materials exhibit various shapes or forms, and possess unique chemical, physical or mechanical properties. When the grain size is below a critical value (∼10–20 nm), more than 50 vol.% of atoms is associated with grain boundaries or interfacial boundaries. In this respect, dislocation pile-ups cannot form, and the Hall–Petch relationship for conventional coarse-grained materials is no longer valid. Therefore, grain boundaries play a major role in the deformation of nanocrystalline materials. Nanocrystalline materials exhibit creep and super plasticity at lower temperatures than conventional micro-grained counterparts. Similarly, plastic deformation of nanocrystalline coatings is considered to be associated with grain boundary sliding assisted by grain boundary diffusion or rotation. In this review paper, current developments in fabrication, microstructure, physical and mechanical properties of nanocrystalline materials and coatings will be addressed. Particular attention is paid to the properties of transition metal nitride nanocrystalline films formed by ion beam assisted deposition process.

Novel Nanoparticle‐Reinforced Metal Matrix Composites with Enhanced Mechanical Properties

Abstract: This paper summarizes and reviews the state-of-the-art processing methods, structures and mechanical properties of the metal matrix composites reinforced with ceramic nanoparticles. The metal matrices of nanocomposites involved include aluminum and magnesium. The processing approaches for nanocomposites can be classified into ex-situ and in-situ synthesis routes. The ex-situ ceramic nanoparticles are prone to cluster during composite processing and the properties of materials are lower than the theoretical values. Despite the fact of clustering, ex-situ nanocomposites reinforced with very low loading levels of nanoparticles exhibit higher yield strength and creep resistance than their microcomposite counterparts filled with much higher particulate content. Better dispersion of ceramic nanoparticles in metal matrix can be achieved by using appropriate processing techniques. Consequently, improvements in both the mechanical strength and ductility can be obtained readily in aluminum or magnesium by adding ceramic nanoparticles. Similar beneficial enhancements in mechanical properties are observed for the nanocomposites reinforced with in-situ nanoparticles.

Friction Stir Welding and Processing

Abstract: Friction stir welding (FSW) is a relatively new solid-state joining process. This joining technique is energy efficient, environment friendly, and versatile. In particular, it can be used to join high-strength aerospace aluminum alloys and other metallic alloys that are hard to weld by conventional fusion welding. FSW is considered to be the most significant development in metal joining in a decade. Recently, friction stir processing (FSP) was developed for microstructural modification of metallic materials. In this review article, the current state of understanding and development of the FSW and FSP are addressed. Particular emphasis has been given to: (a) mechanisms responsible for the formation of welds and microstructural refinement, and (b) effects of FSW/FSP parameters on resultant microstructure and final mechanical properties. While the bulk of the information is related to aluminum alloys, important results are now available for other metals and alloys. At this stage, the technology diffusion has significantly outpaced the fundamental understanding of microstructural evolution and microstructure–property relationships.

American Society for Testing and Materials

Abstract: The American Society for Testing and Materials (ASTM) is an independent organization devoted to the development of standards.

Transformation of carbon dioxide.

Abstract: 4.3. Reaction Mechanism 2373 4.4. Asymmetric Synthesis 2374 4.5. Outlook 2374 5. Alternating Polymerization of Oxiranes and CO2 2374 5.1. Reaction Outlines 2374 5.2. Catalyst 2376 5.3. Asymmetric Polymerization 2377 5.4. Immobilized Catalysts 2377 6. Synthesis of Urea and Urethane Derivatives 2378 7. Synthesis of Carboxylic Acid 2379 8. Synthesis of Esters and Lactones 2380 9. Synthesis of Isocyanates 2382 10. Hydrogenation and Hydroformylation, and Alcohol Homologation 2382