Siewert J. Marrink

Bio: Siewert J. Marrink is an academic researcher from University of Groningen. The author has contributed to research in topics: Membrane & Lipid bilayer. The author has an hindex of 82, co-authored 277 publications receiving 29193 citations. Previous affiliations of Siewert J. Marrink include Australian National University & University of Queensland.

The MARTINI force field : Coarse grained model for biomolecular simulations

Abstract: We present an improved and extended version of our coarse grained lipid model. The new version, coined the MARTINI force field, is parametrized in a systematic way, based on the reproduction of partitioning free energies between polar and apolar phases of a large number of chemical compounds. To reproduce the free energies of these chemical building blocks, the number of possible interaction levels of the coarse-grained sites has increased compared to those of the previous model. Application of the new model to lipid bilayers shows an improved behavior in terms of the stress profile across the bilayer and the tendency to form pores. An extension of the force field now also allows the simulation of planar (ring) compounds, including sterols. Application to a bilayer/cholesterol system at various concentrations shows the typical cholesterol condensation effect similar to that observed in all atom representations.

Coarse grained model for semiquantitative lipid simulations

Abstract: This paper describes the parametrization of a new coarse grained (CG) model for lipid and surfactant systems. Reduction of the number of degrees of freedom together with the use of short range potentials makes it computationally very efficient. Compared to atomistic models a gain of 3-4 orders of magnitude can be achieved. Micrometer length scales or millisecond time scales are therefore within reach. To encourage applications, the model is kept very simple. Only a small number of coarse grained atom types are defined, which interact using a few discrete levels of interaction. Despite the computational speed and the simplistic nature of the model, it proves to be both versatile in its applications and accurate in its predictions. We show that densities of liquid alkanes from decane up to eicosane can be reproduced to within 5%, and the mutual solubilities of alkanes in water and water in alkanes can be reproduced within 0.5 kT of the experimental values. The CG model for dipalmitoylphosphatidylcholine (DPPC) is shown to aggregate spontaneously into a bilayer. Structural properties such as the area per headgroup and the phosphate-phosphate distance match the experimentally measured quantities closely. The same is true for elastic properties such as the bending modulus and the area compressibility, and dynamic properties such as the lipid lateral diffusion coefficient and the water permeation rate. The distribution of the individual lipid components along the bilayer normal is very similar to distributions obtained from atomistic simulations. Phospholipids with different headgroup (ethanolamine) or different tail lengths (lauroyl, stearoyl) or unsaturated tails (oleoyl) can also be modeled with the CG force field. The experimental area per headgroup can be reproduced for most lipids within 0.02 nm(2). Finally, the CG model is applied to nonbilayer phases. Dodecylphosphocholine (DPC) aggregates into small micelles that are structurally very similar to ones modeled atomistically, and DOPE forms an inverted hexagonal phase with structural parameters in agreement with experimental data.

Improved Parameters for the Martini Coarse-Grained Protein Force Field

Abstract: The Martini coarse-grained force field has been successfully used for simulating a wide range of (bio)molecular systems. Recent progress in our ability to test the model against fully atomistic force fields, however, has revealed some shortcomings. Most notable, phenylalanine and proline were too hydrophobic, and dimers formed by polar residues in apolar solvents did not bind strongly enough. Here, we reparametrize these residues either through reassignment of particle types or by introducing embedded charges. The new parameters are tested with respect to partitioning across a lipid bilayer, membrane binding of Wimley–White peptides, and dimerization free energy in solvents of different polarity. In addition, we improve some of the bonded terms in the Martini protein force field that lead to a more realistic length of α-helices and to improved numerical stability for polyalanine and glycine repeats. The new parameter set is denoted Martini version 2.2.

Perspective on the Martini model.

Abstract: The Martini model, a coarse-grained force field for biomolecular simulations, has found a broad range of applications since its release a decade ago. Based on a building block principle, the model combines speed and versatility while maintaining chemical specificity. Here we review the current state of the model. We describe recent highlights as well as shortcomings, and our ideas on the further development of the model.

Computational Lipidomics with insane: A Versatile Tool for Generating Custom Membranes for Molecular Simulations

Abstract: For simulations of membranes and membrane proteins, the generation of the lipid bilayer is a critical step in the setup of the system. Membranes comprising multiple components pose a particular challenge, because the relative abundances need to be controlled and the equilibration of the system may take several microseconds. Here we present a comprehensive method for building membrane containing systems, characterized by simplicity and versatility. The program uses preset, coarse-grain lipid templates to build the membrane, and also allows on-the-fly generation of simple lipid types by specifying the headgroup, linker, and lipid tails on the command line. The resulting models can be equilibrated, after which a relaxed atomistic model can be obtained by reverse transformation. For multicomponent membranes, this provides an efficient means for generating equilibrated atomistic models. The method is called insane, an acronym for INSert membrANE. The program has been made available, together with the complemen...

Fast parallel algorithms for short-range molecular dynamics

Abstract: Three parallel algorithms for classical molecular dynamics are presented. The first assigns each processor a fixed subset of atoms; the second assigns each a fixed subset of inter-atomic forces to compute; the third assigns each a fixed spatial region. The algorithms are suitable for molecular dynamics models which can be difficult to parallelize efficiently—those with short-range forces where the neighbors of each atom change rapidly. They can be implemented on any distributed-memory parallel machine which allows for message-passing of data between independently executing processors. The algorithms are tested on a standard Lennard-Jones benchmark problem for system sizes ranging from 500 to 100,000,000 atoms on several parallel supercomputers--the nCUBE 2, Intel iPSC/860 and Paragon, and Cray T3D. Comparing the results to the fastest reported vectorized Cray Y-MP and C90 algorithm shows that the current generation of parallel machines is competitive with conventional vector supercomputers even for small problems. For large problems, the spatial algorithm achieves parallel efficiencies of 90% and a 1840-node Intel Paragon performs up to 165 faster than a single Cray C9O processor. Trade-offs between the three algorithms and guidelines for adapting them to more complex molecular dynamics simulations are also discussed.

疟原虫var基因转换速率变化导致抗原变异[英]／Paul H, Robert P, Christodoulou Z, et al//Proc Natl Acad Sci U S A

Abstract: 抗原变异可使得多种致病微生物易于逃避宿主免疫应答。表达在感染红细胞表面的恶性疟原虫红细胞表面蛋白1（PfPMP1）与感染红细胞、内皮细胞、树突状细胞以及胎盘的单个或多个受体作用，在黏附及免疫逃避中起关键的作用。每个单倍体基因组var基因家族编码约60种成员，通过启动转录不同的var基因变异体为抗原变异提供了分子基础。

GROMACS: Fast, flexible, and free

Abstract: This article describes the software suite GROMACS (Groningen MAchine for Chemical Simulation) that was developed at the University of Groningen, The Netherlands, in the early 1990s. The software, written in ANSI C, originates from a parallel hardware project, and is well suited for parallelization on processor clusters. By careful optimization of neighbor searching and of inner loop performance, GROMACS is a very fast program for molecular dynamics simulation. It does not have a force field of its own, but is compatible with GROMOS, OPLS, AMBER, and ENCAD force fields. In addition, it can handle polarizable shell models and flexible constraints. The program is versatile, as force routines can be added by the user, tabulated functions can be specified, and analyses can be easily customized. Nonequilibrium dynamics and free energy determinations are incorporated. Interfaces with popular quantum-chemical packages (MOPAC, GAMES-UK, GAUSSIAN) are provided to perform mixed MM/QM simulations. The package includes about 100 utility and analysis programs. GROMACS is in the public domain and distributed (with source code and documentation) under the GNU General Public License. It is maintained by a group of developers from the Universities of Groningen, Uppsala, and Stockholm, and the Max Planck Institute for Polymer Research in Mainz. Its Web site is http://www.gromacs.org.

CHARMM: the biomolecular simulation program.

Abstract: CHARMM (Chemistry at HARvard Molecular Mechanics) is a highly versatile and widely used molecu- lar simulation program. It has been developed over the last three decades with a primary focus on molecules of bio- logical interest, including proteins, peptides, lipids, nucleic acids, carbohydrates, and small molecule ligands, as they occur in solution, crystals, and membrane environments. For the study of such systems, the program provides a large suite of computational tools that include numerous conformational and path sampling methods, free energy estima- tors, molecular minimization, dynamics, and analysis techniques, and model-building capabilities. The CHARMM program is applicable to problems involving a much broader class of many-particle systems. Calculations with CHARMM can be performed using a number of different energy functions and models, from mixed quantum mechanical-molecular mechanical force fields, to all-atom classical potential energy functions with explicit solvent and various boundary conditions, to implicit solvent and membrane models. The program has been ported to numer- ous platforms in both serial and parallel architectures. This article provides an overview of the program as it exists today with an emphasis on developments since the publication of the original CHARMM article in 1983.