scispace - formally typeset
Search or ask a question
Author

Simon C. Apte

Other affiliations: University of Canberra
Bio: Simon C. Apte is an academic researcher from Commonwealth Scientific and Industrial Research Organisation. The author has contributed to research in topics: Copper & Tailings. The author has an hindex of 32, co-authored 90 publications receiving 5967 citations. Previous affiliations of Simon C. Apte include University of Canberra.


Papers
More filters
Journal ArticleDOI
TL;DR: Care needs to be taken in toxicity testing in ascribing toxicity to nanoparticles per se when the effects may be related, at least in part, to simple solubility, as this study has shown.
Abstract: Metal oxide nanoparticles are finding increasing application in various commercial products, leading to concerns for their environmental fate and potential toxicity. It is generally assumed that nanoparticles will persist as small particles in aquatic systems and that their bioavailability could be significantly greater than that of larger particles. The current study using nanoparticulate ZnO (ca. 30 nm) has shown that this is not always so. Particle characterization using transmission electron microscopy and dynamic light scattering techniques showed that particle aggregation is significant in a freshwater system, resulting in flocs ranging from several hundred nanometers to several microns. Chemical investigations using equilibrium dialysis demonstrated rapid dissolution of ZnO nanoparticles in a freshwater medium (pH 7.6), with a saturation solubility in the milligram per liter range, similar to that of bulk ZnO. Toxicity experiments using the freshwater alga Pseudokirchneriella subcapitata revealed c...

1,221 citations

Journal ArticleDOI
TL;DR: The nature and extent of the transformations that occur in nanomaterials must be understood before significant progress can be made toward understanding the environmental risks posed by these materials.
Abstract: Increasing use of engineered nanomaterials with novel properties relative to their bulk counterparts has generated a need to define their behaviors and impacts in the environment. The high surface ...

1,028 citations

Journal ArticleDOI
TL;DR: This journal issue includes papers that describe recent advances with regard to the development of the biotic ligand model and represents a distinct milestone in the ongoing evolution of the BLM approach and, more generally, of approaches to performing ecological assessments for metals in aquatic systems.
Abstract: During recent years, the biotic ligand model (BLM) has been proposed as a tool to evaluate quantitatively the manner in which water chemistry affects the speciation and biological availability of metals in aquatic systems. This is an important consideration because it is the bioavailability and bioreactivity of metals that control their potential to cause adverse effects. The BLM approach has gained widespread interest amongst the scientific, regulated and regulatory communities because of its potential for use in developing water quality criteria (WQC) and in performing aquatic risk assessments for metals. Specifically, the BLM does this in a way that considers the important influences of site-specific water quality. This journal issue includes papers that describe recent advances with regard to the development of the BLM approach. Here, the current status of the BLM development effort is described in the context of the longer-term history of advances in the understanding of metal interactions in the environment upon which the BLM is based. Early developments in the aquatic chemistry of metals, the physiology of aquatic organisms and aquatic toxicology are reviewed first, and the degree to which each of these disciplines influenced the development of water quality regulations is discussed. The early scientific advances that took place in each of these fields were not well coordinated, making it difficult for regulatory authorities to take full advantage of the potential utility of what had been learned. However, this has now changed, with the BLM serving as a useful interface amongst these scientific disciplines, and within the regulatory arena as well. The more recent events that have led to the present situation are reviewed, and consideration is given to some of the future needs and developments related to the BLM that are envisioned. The research results that are described in the papers found in this journal issue represent a distinct milestone in the ongoing evolution of the BLM approach and, more generally, of approaches to performing ecological assessments for metals in aquatic systems. These papers also establish a benchmark to which future scientific and regulatory developments can be compared. Finally, they demonstrate the importance and usefulness of the concept of bioavailability and of evaluative tools such as the BLM.

730 citations

Journal ArticleDOI
TL;DR: In this article, the effects of short-term resuspension of a contaminated anoxic estuarine sediment on solid-phase metal speciation have been studied and preliminary experiments investigated the oxidation rates of model metal sulfide phases to provide mechanistic information for interpreting the observations on the natural sediment.
Abstract: The effects of the short-term resuspension of a contaminated anoxic estuarine sediment on solid-phase metal speciation have been studied. Preliminary experiments investigated the oxidation rates of model metal sulfide phases to provide mechanistic information for interpreting the observations on the natural sediment. FeS and MnS model phases were particularly labile and oxidized rapidly in aerated waters. In contrast, CdS, CuS, PbS, and ZnS model phases were kinetically stable over periods of several hours. The oxidation rate of free sulfide (HS-) was significantly slower than that of FeS and MnS. Upon sediment resuspension, the rapid decrease in acid volatile sulfide (AVS) could be accounted for by the oxidation of iron monosulfide phases. Over prolonged resuspension periods (>300 min), AVS decreased to values lower than the simultaneously extracted metals [SEM = ∑Cd, Cu, Ni, Pb, Zn (1 M HCl extraction, 30 min)] concentration, indicating that a significant fraction of trace metal sulfide phases may be ox...

327 citations

Journal ArticleDOI
TL;DR: Findings suggest that standard static laboratory bioassays using 104 to 105 algal cells/ml may seriously underestimate metal toxicity in natural waters.
Abstract: Algal toxicity tests based on growth inhibition over 72 h have been extensively used to assess the toxicity of contaminants in natural waters. However, these laboratory tests use high cell densities compared to those found in aquatic systems in order to obtain a measurable algal response. The high cell densities and test duration can result in changes in chemical speciation, bioavailability, and toxicity of contaminants throughout the test. With the recent application of flow cytometry to ecotoxicology, it is now possible to use lower initial cell densities to minimize chemical speciation changes. The speciation and toxicity of copper in static bioassays with the tropical freshwater alga Chlorella sp. and the temperate species Selenastrum capricornutum (Pseudokirchneriella subcapitata) were investigated at a range of initial cell densities (10(2)-10(5) cells/ml). Copper toxicity decreased with increasing initial cell density. Copper concentrations required to inhibit growth (cell division) rate by 50% (72-h median effective concentration [EC50]) increased from 4.6 to 16 microg/L for Chlorella sp. and from 6.6 to 17 microg/L for S. capricornutum as the initial cell density increased from 10(2) to 10(5) cells/ml. Measurements of anodic stripping voltammetry-labile, extracellular, and intracellular copper confirmed that at higher initial cell densities, less copper was bound to the cells, resulting in less copper uptake and lower toxicity. Chemical measurements indicated that reduced copper toxicity was due primarily to depletion of dissolved copper in solution, with solution speciation changes due to algal exudates and pH playing a minor role. These findings suggest that standard static laboratory bioassays using 10(4) to 10(5) algal cells/ml may seriously underestimate metal toxicity in natural waters.

190 citations


Cited by
More filters
01 Jun 2012
TL;DR: SPAdes as mentioned in this paper is a new assembler for both single-cell and standard (multicell) assembly, and demonstrate that it improves on the recently released E+V-SC assembler and on popular assemblers Velvet and SoapDeNovo (for multicell data).
Abstract: The lion's share of bacteria in various environments cannot be cloned in the laboratory and thus cannot be sequenced using existing technologies. A major goal of single-cell genomics is to complement gene-centric metagenomic data with whole-genome assemblies of uncultivated organisms. Assembly of single-cell data is challenging because of highly non-uniform read coverage as well as elevated levels of sequencing errors and chimeric reads. We describe SPAdes, a new assembler for both single-cell and standard (multicell) assembly, and demonstrate that it improves on the recently released E+V-SC assembler (specialized for single-cell data) and on popular assemblers Velvet and SoapDeNovo (for multicell data). SPAdes generates single-cell assemblies, providing information about genomes of uncultivatable bacteria that vastly exceeds what may be obtained via traditional metagenomics studies. SPAdes is available online ( http://bioinf.spbau.ru/spades ). It is distributed as open source software.

10,124 citations

01 Jan 1980
TL;DR: In this article, the influence of diet on the distribution of nitrogen isotopes in animals was investigated by analyzing animals grown in the laboratory on diets of constant nitrogen isotopic composition and found that the variability of the relationship between the δ^(15)N values of animals and their diets is greater for different individuals raised on the same diet than for the same species raised on different diets.
Abstract: The influence of diet on the distribution of nitrogen isotopes in animals was investigated by analyzing animals grown in the laboratory on diets of constant nitrogen isotopic composition. The isotopic composition of the nitrogen in an animal reflects the nitrogen isotopic composition of its diet. The δ^(15)N values of the whole bodies of animals are usually more positive than those of their diets. Different individuals of a species raised on the same diet can have significantly different δ^(15)N values. The variability of the relationship between the δ^(15)N values of animals and their diets is greater for different species raised on the same diet than for the same species raised on different diets. Different tissues of mice are also enriched in ^(15)N relative to the diet, with the difference between the δ^(15)N values of a tissue and the diet depending on both the kind of tissue and the diet involved. The δ^(15)N values of collagen and chitin, biochemical components that are often preserved in fossil animal remains, are also related to the δ^(15)N value of the diet. The dependence of the δ^(15)N values of whole animals and their tissues and biochemical components on the δ^(15)N value of diet indicates that the isotopic composition of animal nitrogen can be used to obtain information about an animal's diet if its potential food sources had different δ^(15)N values. The nitrogen isotopic method of dietary analysis probably can be used to estimate the relative use of legumes vs non-legumes or of aquatic vs terrestrial organisms as food sources for extant and fossil animals. However, the method probably will not be applicable in those modern ecosystems in which the use of chemical fertilizers has influenced the distribution of nitrogen isotopes in food sources. The isotopic method of dietary analysis was used to reconstruct changes in the diet of the human population that occupied the Tehuacan Valley of Mexico over a 7000 yr span. Variations in the δ^(15)C and δ^(15)N values of bone collagen suggest that C_4 and/or CAM plants (presumably mostly corn) and legumes (presumably mostly beans) were introduced into the diet much earlier than suggested by conventional archaeological analysis.

5,548 citations

Journal ArticleDOI
TL;DR: This review covered ZnO-NPs antibacterial activity including testing methods, impact of UV illumination,ZnO particle properties (size, concentration, morphology, and defects), particle surface modification, and minimum inhibitory concentration.
Abstract: Antibacterial activity of zinc oxide nanoparticles (ZnO-NPs) has received significant interest worldwide particularly by the implementation of nanotechnology to synthesize particles in the nanometer region. Many microorganisms exist in the range from hundreds of nanometers to tens of micrometers. ZnO-NPs exhibit attractive antibacterial properties due to increased specific surface area as the reduced particle size leading to enhanced particle surface reactivity. ZnO is a bio-safe material that possesses photo-oxidizing and photocatalysis impacts on chemical and biological species. This review covered ZnO-NPs antibacterial activity including testing methods, impact of UV illumination, ZnO particle properties (size, concentration, morphology, and defects), particle surface modification, and minimum inhibitory concentration. Particular emphasize was given to bactericidal and bacteriostatic mechanisms with focus on generation of reactive oxygen species (ROS) including hydrogen peroxide (H2O2), OH− (hydroxyl radicals), and O2 −2 (peroxide). ROS has been a major factor for several mechanisms including cell wall damage due to ZnO-localized interaction, enhanced membrane permeability, internalization of NPs due to loss of proton motive force and uptake of toxic dissolved zinc ions. These have led to mitochondria weakness, intracellular outflow, and release in gene expression of oxidative stress which caused eventual cell growth inhibition and cell death. In some cases, enhanced antibacterial activity can be attributed to surface defects on ZnO abrasive surface texture. One functional application of the ZnO antibacterial bioactivity was discussed in food packaging industry where ZnO-NPs are used as an antibacterial agent toward foodborne diseases. Proper incorporation of ZnO-NPs into packaging materials can cause interaction with foodborne pathogens, thereby releasing NPs onto food surface where they come in contact with bad bacteria and cause the bacterial death and/or inhibition.

2,627 citations

Journal ArticleDOI
TL;DR: This review critiques existing nanomaterial research in freshwater, marine, and soil environments and illustrates the paucity of existing research and demonstrates the need for additional research.
Abstract: The recent advances in nanotechnology and the corresponding increase in the use of nanomaterials in products in every sector of society have resulted in uncertainties regarding environmental impacts. The objectives of this review are to introduce the key aspects pertaining to nanomaterials in the environment and to discuss what is known concerning their fate, behavior, disposition, and toxicity, with a particular focus on those that make up manufactured nanomaterials. This review critiques existing nanomaterial research in freshwater, marine, and soil environments. It illustrates the paucity of existing research and demonstrates the need for additional research. Environmental scientists are encouraged to base this research on existing studies on colloidal behavior and toxicology. The need for standard reference and testing materials as well as methodology for suspension preparation and testing is also discussed.

2,566 citations

Journal ArticleDOI
TL;DR: The basic concept of the nanoparticle corona is reviewed and its structure and composition is highlighted, and how the properties of the corona may be linked to its biological impacts are highlighted.
Abstract: The search for understanding the interactions of nanosized materials with living organisms is leading to the rapid development of key applications, including improved drug delivery by targeting nanoparticles, and resolution of the potential threat of nanotechnological devices to organisms and the environment. Unless they are specifically designed to avoid it, nanoparticles in contact with biological fluids are rapidly covered by a selected group of biomolecules to form a corona that interacts with biological systems. Here we review the basic concept of the nanoparticle corona and its structure and composition, and highlight how the properties of the corona may be linked to its biological impacts. We conclude with a critical assessment of the key problems that need to be resolved in the near future.

2,245 citations