Author
Simon Rommel
Other affiliations: National Institute of Information and Communications Technology, Sant'Anna School of Advanced Studies, Technical University of Denmark
Bio: Simon Rommel is an academic researcher from Eindhoven University of Technology. The author has contributed to research in topics: Radio over fiber & Wireless. The author has an hindex of 11, co-authored 105 publications receiving 574 citations. Previous affiliations of Simon Rommel include National Institute of Information and Communications Technology & Sant'Anna School of Advanced Studies.
Papers
More filters
••
TL;DR: The introduction of SDM with multi-core fibers in the fronthaul network as suggested by the blueSPACE project is discussed, regarding both digitized and analog radio-over-fiber fr onthaul transport as well as the introduction of optical beamforming for high-capacity millimeter-wave radio access.
Abstract: The introduction of 5G mobile networks, bringing multi-Gbit/s user data rates and reduced latency, opens new opportunities for media generation, transport and distribution, as well as for new immersive media applications. The expected use of millimeter-wave carriers and the strong network densification resulting from a much reduced cell size—which enable the expected performance of 5G—pose major challenges to the fronthaul network. Space division multiplexing (SDM) in the optical domain has been suggested for ultra-high capacity fronthaul networks that naturally support different classes of fronthaul traffic and further enable the use of analog radio-over-fiber and advanced technologies, such as optical beamforming. This paper discusses the introduction of SDM with multi-core fibers in the fronthaul network as suggested by the blueSPACE project, regarding both digitized and analog radio-over-fiber fronthaul transport as well as the introduction of optical beamforming for high-capacity millimeter-wave radio access. Analog and digitized radio-over-fiber are discussed in a scenario featuring parallel fronthaul for different radio access technologies, showcasing their differences and potential when combined with SDM.
56 citations
••
TL;DR: The use of analog radio-over-fiber (ARoF) is proposed and demonstrated as a viable alternative which, combined with space division multiplexing in the optical distribution network as well as photonic integration of the required transceivers, shows a path to a scaleable fronthaul solution for 5G.
Abstract: The introduction of millimeter wave (mm-wave) frequency bands for cellular communications with significantly larger bandwidths compared to their sub-6 GHz counterparts, the resulting densification of network deployments and the introduction of antenna arrays with beamforming result in major increases in fronthaul capacity required for 5G networks As a result, a radical re-design of the radio access network is required since traditional fronthaul technologies are not scaleable In this article the use of analog radio-over-fiber (ARoF) is proposed and demonstrated as a viable alternative which, combined with space division multiplexing in the optical distribution network as well as photonic integration of the required transceivers, shows a path to a scaleable fronthaul solution for 5G The trade-off between digitized and analog fronthaul is discussed and the ARoF architecture proposed by blueSPACE is introduced Two options for the generation of ARoF two-tone signals for mm-wave generation via optical heterodyning are discussed in detail, including designs for the implementation in photonic integrated circuits as well as measurements of their phase noise performance The proposed photonic integrated circuit designs include the use of both InP and SiN platforms for ARoF signal generation and optical beamforming respectively, proposing a joint design that allows for true multi-beam transmission from a single antenna array Phase noise measurements based on laboratory implementations of ARoF generation based on a Mach–Zehnder modulator with suppressed carrier and with an optical phase-locked loop are presented and the suitability of these transmitters is evaluated though phase noise simulations Finally, the viability of the proposed ARoF fronthaul architecture for the transport of high-bandwidth mm-wave 5G signals is proven with the successful implementation of a real-time transmission link based on an ARoF baseband unit with full real-time processing of extended 5G new radio signals with 800 MHz bandwidth, achieving transmission over 10 km of 7-core single-mode multi-core fiber and 9 m mm-wave wireless at 255 GHz with bit error rates below the limit for a 7% overhead hard decision forward error correction
48 citations
••
01 Sep 2018TL;DR: This work presents how data centers could benefit from 6G technologies, particularly in assuring flexibility and adaptability, without compromising scalability.
Abstract: Wireless connectivity and photonic-wireless links in data centers allow fast deployment and dynamic reconfigurability. Technological advances in millimeter and sub-THz communications will soon go beyond 5G and trigger 6G systems. We present how data centers could benefit from such 6G technologies, particularly in assuring flexibility and adaptability, without compromising scalability.
37 citations
••
TL;DR: The results indicate that the proposed algorithm enables a practical and effective implementation of DBP in real-time optical receivers, with only a moderate increase in the computational complexity, power consumption, and latency with respect to a simple feed-forward equalizer for bulk dispersion compensation.
Abstract: Nonlinearity mitigation based on the enhanced split-step Fourier method (ESSFM) for the implementation of low-complexity digital backpropagation (DBP) is investigated and experimentally demonstrated. After reviewing the main computational aspects of DBP and of the conventional split-step Fourier method (SSFM), the ESSFM for dual-polarization signals is introduced. Computational complexity, latency, and power consumption of DBP based on the SSFM and ESSFM algorithms are estimated and compared. Effective low-complexity nonlinearity mitigation in a 112 Gb/s polarization-multiplexed QPSK system is experimentally demonstrated by using a single-step DBP based on the ESSFM. The proposed DBP implementation requires only a single step of the ESSFM algorithm to achieve a transmission distance of 3200 km over a dispersion-unmanaged link. In comparison, a conventional DBP implementation requires 20 steps of the SSFM algorithm to achieve the same performance. An analysis of the computational complexity and structure of the two algorithms reveals that the overall complexity and power consumption of DBP are reduced by a factor of 16 with respect to a conventional implementation, while the computation time is reduced by a factor of 20. Similar complexity reductions can be obtained at longer distances if higher error probabilities are acceptable. The results indicate that the proposed algorithm enables a practical and effective implementation of DBP in real-time optical receivers, with only a moderate increase in the computational complexity, power consumption, and latency with respect to a simple feed-forward equalizer for bulk dispersion compensation.
37 citations
••
TL;DR: This manuscript introduces a 5G radio access network architecture concept based on ultra-dense wavelength division multiplexing (UDWDM) and incorporating an optical fronthaul network that uses a novel wireless antenna system for radio frequency transmission and reception.
35 citations
Cited by
More filters
••
[...]
TL;DR: There is, I think, something ethereal about i —the square root of minus one, which seems an odd beast at that time—an intruder hovering on the edge of reality.
Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality.
Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …
33,785 citations
01 Jan 2017
TL;DR: The 2017 roadmap of terahertz frequency electromagnetic radiation (100 GHz-30 THz) as mentioned in this paper provides a snapshot of the present state of THz science and technology in 2017, and provides an opinion on the challenges and opportunities that the future holds.
Abstract: Science and technologies based on terahertz frequency electromagnetic radiation (100 GHz–30 THz) have developed rapidly over the last 30 years. For most of the 20th Century, terahertz radiation, then referred to as sub-millimeter wave or far-infrared radiation, was mainly utilized by astronomers and some spectroscopists. Following the development of laser based terahertz time-domain spectroscopy in the 1980s and 1990s the field of THz science and technology expanded rapidly, to the extent that it now touches many areas from fundamental science to 'real world' applications. For example THz radiation is being used to optimize materials for new solar cells, and may also be a key technology for the next generation of airport security scanners. While the field was emerging it was possible to keep track of all new developments, however now the field has grown so much that it is increasingly difficult to follow the diverse range of new discoveries and applications that are appearing. At this point in time, when the field of THz science and technology is moving from an emerging to a more established and interdisciplinary field, it is apt to present a roadmap to help identify the breadth and future directions of the field. The aim of this roadmap is to present a snapshot of the present state of THz science and technology in 2017, and provide an opinion on the challenges and opportunities that the future holds. To be able to achieve this aim, we have invited a group of international experts to write 18 sections that cover most of the key areas of THz science and technology. We hope that The 2017 Roadmap on THz science and technology will prove to be a useful resource by providing a wide ranging introduction to the capabilities of THz radiation for those outside or just entering the field as well as providing perspective and breadth for those who are well established. We also feel that this review should serve as a useful guide for government and funding agencies.
690 citations
••
[...]
TL;DR: It is suggested that human-centric mobile communications will still be the most important application of 6G and the 6G network should be human centric and high security, secrecy and privacy are its key features.
Abstract: The standardization of fifth generation (5G) communications has been completed, and the 5G network should be commercially launched in 2020. As a result, the visioning and planning of 6G communications has begun, with an aim to provide communication services for the future demands of the 2030s. Here, we provide a vision for 6G that could serve as a research guide in the post-5G era. We suggest that human-centric mobile communications will still be the most important application of 6G and the 6G network should be human centric. Thus, high security, secrecy and privacy should be key features of 6G and should be given particular attention by the wireless research community. To support this vision, we provide a systematic framework in which potential application scenarios of 6G are anticipated and subdivided. We subsequently define key potential features of 6G and discuss the required communication technologies. We also explore the issues beyond communication technologies that could hamper research and deployment of 6G. This Perspective provides a vision for sixth generation (6G) communications in which human-centric mobile communications are considered the most important application, and high security, secrecy and privacy are its key features.
663 citations
••
[...]
TL;DR: In this article, the authors provide a vision for 6G that could serve a research guide in the post-5G era and suggest that human-centric mobile communications will still be the most important application of 6G and the 6G network should be human centric.
Abstract: The standardization of fifth generation (5G) communications has been completed, and the 5G network should be commercially launched in 2020. As a result, the visioning and planning of sixth generation (6G) communications has begun, with an aim to provide communication services for the future demands of the 2030s. Here we provide a vision for 6G that could serve a research guide in the post-5G era. We suggest that human-centric mobile communications will still be the most important application of 6G and the 6G network should be human centric. Thus, high security, secrecy, and privacy should be key features of 6G and should be given particular attention by the wireless research community. To support this vision, we provide a systematic framework in which potential application scenarios of 6G are anticipated and subdivided. We subsequently define key potential features of 6G and discuss the required communication technologies. We also explore the issues beyond communication technologies that could hamper research and deployment of 6G.
496 citations
••
TL;DR: This paper provides the design guideline for managing the link budget of UAV communications taking account of link losses and channel fading effects, and analyzes the receive/transmit diversity gain and spatial multiplexing gain achieved by multiple-antenna-aided UAV communication.
Abstract: Unmanned aerial vehicles (UAVs) have stroke great interested both by the academic community and the industrial community due to their diverse military applications and civilian applications. Furthermore, UAVs are also envisioned to be part of future airspace traffic. The application functions delivery relies on information exchange among UAVs as well as between UAVs and ground stations (GSs), which further closely depends on aeronautical channels. However, there is a paucity of comprehensive surveys on aeronautical channel modeling in line with the specific aeronautical characteristics and scenarios. To fill this gap, this paper focuses on reviewing the air-to-ground (A2G), ground-to-ground (G2G), and air-to-air (A2A) channel measurements and modeling for UAV communications and aeronautical communications under various scenarios. We also provide the design guideline for managing the link budget of UAV communications taking account of link losses and channel fading effects. Moreover, we also analyze the receive/transmit diversity gain and spatial multiplexing gain achieved by multiple-antenna-aided UAV communications. Finally, we discuss the remaining challenge and open issues for the future development of UAV communication channel modeling.
229 citations