Siniša Sremac

Bio: Siniša Sremac is an academic researcher from University of Novi Sad. The author has contributed to research in topics: Multiple-criteria decision analysis & Supply chain. The author has an hindex of 10, co-authored 30 publications receiving 472 citations. Previous affiliations of Siniša Sremac include University of Novi Sad Faculty of Technical Sciences.

A New Model for Determining Weight Coefficients of Criteria in MCDM Models: Full Consistency Method (FUCOM)

Abstract: In this paper, a new multi-criteria problem solving method—the Full Consistency Method (FUCOM)—is proposed. The model implies the definition of two groups of constraints that need to satisfy the optimal values of weight coefficients. The first group of constraints is the condition that the relations of the weight coefficients of criteria should be equal to the comparative priorities of the criteria. The second group of constraints is defined on the basis of the conditions of mathematical transitivity. After defining the constraints and solving the model, in addition to optimal weight values, a deviation from full consistency (DFC) is obtained. The degree of DFC is the deviation value of the obtained weight coefficients from the estimated comparative priorities of the criteria. In addition, DFC is also the reliability confirmation of the obtained weights of criteria. In order to illustrate the proposed model and evaluate its performance, FUCOM was tested on several numerical examples from the literature. The model validation was performed by comparing it with the other subjective models (the Best Worst Method (BWM) and Analytic Hierarchy Process (AHP)), based on the pairwise comparisons of the criteria and the validation of the results by using DFC. The results show that FUCOM provides better results than the BWM and AHP methods, when the relation between consistency and the required number of the comparisons of the criteria are taken into consideration. The main advantages of FUCOM in relation to the existing multi-criteria decision-making (MCDM) methods are as follows: (1) a significantly smaller number of pairwise comparisons (only n − 1), (2) a consistent pairwise comparison of criteria, and (3) the calculation of the reliable values of criteria weight coefficients, which contribute to rational judgment.

A New Hybrid MCDM Model: Sustainable Supplier Selection in a Construction Company

Abstract: Sustainable development is one of the most important preconditions for preserving resources and balanced functioning of a complete supply chain in different areas. Taking into account the complexity of sustainable development and a supply chain, different decisions have to be made day-to-day, requiring the consideration of different parameters. One of the most important decisions in a sustainable supply chain is the selection of a sustainable supplier and, often the applied methodology is multi-criteria decision-making (MCDM). In this paper, a new hybrid MCDM model for evaluating and selecting suppliers in a sustainable supply chain for a construction company has been developed. The evaluation and selection of suppliers have been carried out on the basis of 21 criteria that belong to all aspects of sustainability. The determination of the weight values of criteria has been performed applying the full consistency method (FUCOM), while a new rough complex proportional assessment (COPRAS) method has been developed to evaluate the alternatives. The rough Dombi aggregator has been used for averaging in group decision-making while evaluating the significance of criteria and assessing the alternatives. The obtained results have been checked and confirmed using a sensitivity analysis that implies a four-phase procedure. In the first phase, the change of criteria weight was performed, while, in the second phase, rough additive ratio assessment (ARAS), rough weighted aggregated sum product assessment (WASPAS), rough simple additive weighting (SAW), and rough multi-attributive border approximation area comparison (MABAC) have been applied. The third phase involves changing the parameter ρ in the modeling of rough Dombi aggregator, and the fourth phase includes the calculation of Spearman’s correlation coefficient (SCC) that shows a high correlation of ranks.

Evaluation of a Third-Party Logistics (3PL) Provider Using a Rough SWARA–WASPAS Model Based on a New Rough Dombi Aggregator

Abstract: For companies active in various sectors, the implementation of transport services and other logistics activities has become one of the key factors of efficiency in the total supply chain. Logistics outsourcing is becoming more and more important, and there is an increasing number of third party logistics providers. In this paper, logistics providers were evaluated using the Rough SWARA (Step-Wise Weight Assessment Ratio Analysis) and Rough WASPAS (Weighted Aggregated Sum Product Assessment) models. The significance of the eight criteria on the basis of which evaluation was carried out was determined using the Rough SWARA method. In order to allow for a more precise consensus in group decision-making, the Rough Dombi aggregator was developed in order to determine the initial rough matrix of multi-criteria decision-making. A total of 10 logistics providers dealing with the transport of dangerous goods for chemical industry companies were evaluated using the Rough WASPAS approach. The obtained results demonstrate that the first logistics provider is also the best one, a conclusion confirmed by a sensitivity analysis comprised of three parts. In the first part, parameter ρ was altered through 10 scenarios in which only alternatives four and five change their ranks. In the second part of the sensitivity analysis, a calculation was performed using the following approaches: Rough SAW (Simple Additive Weighting), Rough EDAS (Evaluation Based on Distance from Average Solution), Rough MABAC (MultiAttributive Border Approximation Area Comparison), and Rough TOPSIS (Technique for Order of Preference by Similarity to Ideal Solution). They showed a high correlation of ranks determined by applying Spearman’s correlation coefficient in the third part of the sensitivity analysis.

selection of carpenter manufacturer using fuzzy EDAS method

Abstract: Making a decision in everyday life always comes with uncertainty and responsibility. To reduce the risk to a minumum and in order to make a right decision a person can use methods of multicriteria analysis in combination in fuzzy logic. A married couple, representing decision makers in this case study, have purchased an apartment and it needs to be completely refurbished including outside carpentry. Aim of this study is to select the most suitable manufacturer of PVC carpentry for apartment refurbishing. A total pool of 14 quantitative and qualitative criteria is used as a base for selection of the most suitable of seven available manufacturers. For this case study we will use one of newer methods of multicriteria analysis of fuzzy Evaluation Based on Distance from Average Solution (fuzzy EDAS) method. Having reached the results, an analysis of sensitivity has been conducted showing stability of results where manufacturer number 4 represents an optimal solution in 13 experimental sets out of 14 total.DOI: http://dx.doi.org/10.5755/j01.ee.29.3.16818

New multi-criteria LNN WASPAS model for evaluating the work of advisors in the transport of hazardous goods

Abstract: Successfully organizing the transport of hazardous materials and handling them correctly is a very important logistical task that affects both the overall flow of transport and the environment. Safety advisors for the transport of hazardous materials have a very important role to play in the proper and safe development of the transport flow for these materials; their task is primarily to use their knowledge and effort to prevent potential accidents from happening. In this research, a total of 21 safety advisors for the transport of hazardous materials in Serbia are assessed using a new model that integrates Linguistic Neutrosophic Numbers (LNN) and the WASPAS (Weighted Aggregated Sum Product Assessment) method. In this way, two important contributions are made, namely a completely new methodology for assessing the work of advisors and the new LNN WASPAS model, which enriches the field of multi-criteria decision making. The advisors are assessed by seven experts on the basis of nine criteria. After performing a sensitivity analysis on the results, validation of the model is carried out. The results obtained by the LNN WASPAS model are validated by comparing them with the results obtained by LNN extensions of the TOPSIS (Technique for Order Performance by Similarity to Ideal Solution), LNN CODAS (COmbinative Distance-based ASsessment), LNN VIKOR (Multi-criteria Optimization and Compromise Solution) and LNN MABAC (Multi-Attributive Border Approximation area Comparison) models. The LNN CODAS, LNN VIKOR and LNN MABAC are also further developed in this study, which is an additional contribution made by the paper. After the sensitivity analysis, the SCC (Spearman Correlation Coefficient) is calculated which confirms the stability of the previously obtained results.

Applications of evolutionary computing: EvoWorkshops 2008: EvoCOMNET, EvoFIN, EvoHOT, EvoIASP, EvoMUSART, EvoNUM, EvoSTOC, and EvoTransLog, Naples, Italy, March 26-28, 2008. Proceedings.

Abstract: EvoCOMNET Contributions.- New Research in Nature Inspired Algorithms for Mobility Management in GSM Networks.- Adaptive Local Search for a New Military Frequency Hopping Planning Problem.- SS vs PBIL to Solve a Real-World Frequency Assignment Problem in GSM Networks.- Reconstruction of Networks from Their Betweenness Centrality.- A Self-learning Optimization Technique for Topology Design of Computer Networks.- A Comparative Study of Fuzzy Inference Systems, Neural Networks and Adaptive Neuro Fuzzy Inference Systems for Portscan Detection.- EvoFIN Contributions.- Evolutionary Single-Position Automated Trading.- Genetic Programming in Statistical Arbitrage.- Evolutionary System for Generating Investment Strategies.- Horizontal Generalization Properties of Fuzzy Rule-Based Trading Models.- Particle Swarm Optimization for Tackling Continuous Review Inventory Models.- Option Model Calibration Using a Bacterial Foraging Optimization Algorithm.- A SOM and GP Tool for Reducing the Dimensionality of a Financial Distress Prediction Problem.- Quantum-Inspired Evolutionary Algorithms for Financial Data Analysis.- EvoHOT Contributions.- Analysis of Reconfigurable Logic Blocks for Evolvable Digital Architectures.- Analogue Circuit Control through Gene Expression.- Discovering Several Robot Behaviors through Speciation.- Architecture Performance Prediction Using Evolutionary Artificial Neural Networks.- Evolving a Vision-Driven Robot Controller for Real-World Indoor Navigation.- Evolving an Automatic Defect Classification Tool.- Deterministic Test Pattern Generator Design.- An Evolutionary Methodology for Test Generation for Peripheral Cores Via Dynamic FSM Extraction.- Exploiting MOEA to Automatically Geneate Test Programs for Path-Delay Faults in Microprocessors.- EvoIASP Contributions.- Evolutionary Object Detection by Means of Naive Bayes Models Estimation.- An Evolutionary Framework for Colorimetric Characterization of Scanners.- Artificial Creatures for Object Tracking and Segmentation.- Automatic Recognition of Hand Gestures with Differential Evolution.- Optimizing Computed Tomographic Angiography Image Segmentation Using Fitness Based Partitioning.- A GA-Based Feature Selection Algorithm for Remote Sensing Images.- An Evolutionary Approach for Ontology Driven Image Interpretation.- Hybrid Genetic Algorithm Based on Gene Fragment Competition for Polyphonic Music Transcription.- Classification of Seafloor Habitats Using Genetic Programming.- Selecting Local Region Descriptors with a Genetic Algorithm for Real-World Place Recognition.- Object Detection Using Neural Networks and Genetic Programming.- Direct 3D Metric Reconstruction from Multiple Views Using Differential Evolution.- Discrete Tomography Reconstruction through a New Memetic Algorithm.- A Fuzzy Hybrid Method for Image Decomposition Problem.- Triangulation Using Differential Evolution.- Fast Multi-template Matching Using a Particle Swarm Optimization Algorithm for PCB Inspection.- EvoMUSART Contributions.- A Generative Representation for the Evolution of Jazz Solos.- Automatic Invention of Fitness Functions with Application to Scene Generation.- Manipulating Artificial Ecosystems.- Evolved Diffusion Limited Aggregation Compositions.- Scaffolding for Interactively Evolving Novel Drum Tracks for Existing Songs.- AtomSwarm: A Framework for Swarm Improvisation.- Using DNA to Generate 3D Organic Art Forms.- Towards Music Fitness Evaluation with the Hierarchical SOM.- Evolutionary Pointillist Modules: Evolving Assemblages of 3D Objects.- An Artificial-Chemistry Approach to Generating Polyphonic Musical Phrases.- Implicit Fitness Functions for Evolving a Drawing Robot.- Free Flight in Parameter Space: A Dynamic Mapping Strategy for Expressive Free Impro.- Modelling Video Games' Landscapes by Means of Genetic Terrain Programming - A New Approach for Improving Users' Experience.- Virtual Constructive Swarm Compositions and Inspirations.- New-Generation Methods in an Interpolating EC Synthesizer Interface.- Composing Music with Neural Networks and Probabilistic Finite-State Machines.- TransFormer #13: Exploration and Adaptation of Evolution Expressed in a Dynamic Sculpture.- EvoNUM Contributions.- Multiobjective Tuning of Robust PID Controllers Using Evolutionary Algorithms.- Truncation Selection and Gaussian EDA: Bounds for Sustainable Progress in High-Dimensional Spaces.- Scalable Continuous Multiobjective Optimization with a Neural Network-Based Estimation of Distribution Algorithm.- Cumulative Step Length Adaptation for Evolution Strategies Using Negative Recombination Weights.- Computing Surrogate Constraints for Multidimensional Knapsack Problems Using Evolution Strategies.- A Critical Assessment of Some Variants of Particle Swarm Optimization.- An Evolutionary Game-Theoretical Approach to Particle Swarm Optimisation.- A Hybrid Particle Swarm Optimization Algorithm for Function Optimization.- EvoSTOC Contributions.- Memory Based on Abstraction for Dynamic Fitness Functions.- A Memory Enhanced Evolutionary Algorithm for Dynamic Scheduling Problems.- Compound Particle Swarm Optimization in Dynamic Environments.- An Evolutionary Algorithm for Adaptive Online Services in Dynamic Environment.- EvoTHEORY Contributions.- A Study of Some Implications of the No Free Lunch Theorem.- Negative Slope Coefficient and the Difficulty of Random 3-SAT Instances.- EvoTRANSLOG Contributions.- A Memetic Algorithm for the Team Orienteering Problem.- Decentralized Evolutionary Optimization Approach to the p-Median Problem.- Genetic Computation of Road Network Design and Pricing Stackelberg Games with Multi-class Users.- Constrained Local Search Method for Bus Fleet Scheduling Problem with Multi-depot with Line Change.- Evolutionary System with Precedence Constraints for Ore Harbor Schedule Optimization.

A survey of blockchain consensus algorithms performance evaluation criteria

Abstract: How to reach an agreement in a blockchain network is a complex and important task that is defined as a consensus problem and has wide applications in reality including distributed computing, load balancing, and transaction validation in blockchains. Over recent years, many studies have been done to cope with this problem. In this paper, a comparative and analytical review on the state-of-the-art blockchain consensus algorithms is presented to enlighten the strengths and constraints of each algorithm. Based on their inherent specifications, each algorithm has a different domain of applicability that yields to propose several performance criteria for the evaluation of these algorithms. To overview and provide a basis of comparison for further work in the field, a set of incommensurable and conflicting performance evaluation criteria is identified and weighted by the pairwise comparison method. These criteria are classified into four categories including algorithms’ throughput, the profitability of mining, degree of decentralization and consensus algorithms vulnerabilities and security issues. Based on the proposed framework, the pros and cons of consensus algorithms are systematically analyzed and compared in order to provide a deep understanding of the existing research challenges and clarify the future study directions.

Are MCDA Methods Benchmarkable? A Comparative Study of TOPSIS, VIKOR, COPRAS, and PROMETHEE II Methods

Abstract: Multi-Criteria Decision-Analysis (MCDA) methods are successfully applied in different fields and disciplines. However, in many studies, the problem of selecting the proper methods and parameters for the decision problems is raised. The paper undertakes an attempt to benchmark selected Multi-Criteria Decision Analysis (MCDA) methods. To achieve that, a set of feasible MCDA methods was identified. Based on reference literature guidelines, a simulation experiment was planned. The formal foundations of the authors’ approach provide a reference set of MCDA methods ( Technique for Order Preference by Similarity to Ideal Solution (TOPSIS), VlseKriterijumska Optimizacija I Kompromisno Resenje (VIKOR), Complex Proportional Assessment (COPRAS), and PROMETHEE II: Preference Ranking Organization Method for Enrichment of Evaluations) along with their similarity coefficients (Spearman correlation coefficients and WS coefficient). This allowed the generation of a set of models differentiated by the number of attributes and decision variants, as well as similarity research for the obtained rankings sets. As the authors aim to build a complex benchmarking model, additional dimensions were taken into account during the simulation experiments. The aspects of the performed analysis and benchmarking methods include various weighing methods (results obtained using entropy and standard deviation methods) and varied techniques of normalization of MCDA model input data. Comparative analyses showed the detailed influence of values of particular parameters on the final form and a similarity of the final rankings obtained by different MCDA methods.

Weighting methods for multi-criteria decision making technique

Abstract: Determining criteria weights is a problem that arises frequently in many multi-criteria decision-making (MCDM) techniques. Taking into account the fact that the weights of criteria can significantly influence the outcome of the decision-making process, it is important to pay particular attention to the objectivity factors of criteria weights. This paper provides an overview of different weighting methods applicable to multi-criteria optimization techniques. There are a lot of concept been reported from the literature that are very useful in solving multicriteria problems. The present work emphasized on the use of these weighting methods in determining the criteria preference of each criterion to bring about desirable properties and in order to establish and satisfy a multiple measure of performance across all the criteria selected by identifying the best options possible. And from the results, it shows that subjective weighting methods are easy and straight forward in terms of their computations than the objective weighting methods which derived their information from each criterion by adopting a mathematical function to determine the weights without the decision-maker’s input,. This can be seen from the pairwise comparison which gives an internal storage and random access memory of a smart phone a weight value of 0.33 and 0.22 respectively as they have the highest criteria weights. Keywords: Multi-criteria, Decision-making, Relative importance, Alternative, Criteria