scispace - formally typeset
Search or ask a question
Author

Slawomir Braun

Other affiliations: University of Mons-Hainaut
Bio: Slawomir Braun is an academic researcher from Linköping University. The author has contributed to research in topics: Organic semiconductor & Organic electronics. The author has an hindex of 29, co-authored 62 publications receiving 5091 citations. Previous affiliations of Slawomir Braun include University of Mons-Hainaut.


Papers
More filters
Journal ArticleDOI
TL;DR: It is shown that conducting polymers might be capable of meeting the demands of electricity production from waste heat (co-generation) and natural heat sources and to generate electricity from large volumes of warm fluids, heat exchangers must be functionalized with TEGs.
Abstract: Thermoelectric generators (TEGs) transform a heat flow into electricity. Thermoelectric materials are being investigated for electricity production from waste heat (co-generation) and natural heat sources. For temperatures below 200 °C, the best commercially available inorganic semiconductors are bismuth telluride (Bi(2)Te(3))-based alloys, which possess a figure of merit ZT close to one. Most of the recently discovered thermoelectric materials with ZT>2 exhibit one common property, namely their low lattice thermal conductivities. Nevertheless, a high ZT value is not enough to create a viable technology platform for energy harvesting. To generate electricity from large volumes of warm fluids, heat exchangers must be functionalized with TEGs. This requires thermoelectric materials that are readily synthesized, air stable, environmentally friendly and solution processable to create patterns on large areas. Here we show that conducting polymers might be capable of meeting these demands. The accurate control of the oxidation level in poly(3,4-ethylenedioxythiophene) (PEDOT) combined with its low intrinsic thermal conductivity (λ=0.37 W m(-1) K(-1)) yields a ZT=0.25 at room temperature that approaches the values required for efficient devices.

1,470 citations

Journal ArticleDOI
TL;DR: A review of recent work on modeling of organic/metal and organic/organic interfaces can be found in this article, where the strength of the interaction at the interface has been used as the main factor.
Abstract: In this Review, we summarize recent work on modeling of organic/metal and organic/organic interfaces. Some of the models discussed have a semiempirical approach, that is, experimentally derived values are used in combination with theory, and others rely completely of calculations. The models are categorized according to the types of interfaces they apply to, and the strength of the interaction at the interface has been used as the main factor. We explain the basics of the models, their use, and give examples on how the models correlate with experimental results. We stress that given the complexity of organic/metal and organic/organic interface formation, it is crucial to know the exact way in which the interface was formed before choosing the model that is applicable, as none of the models presented covers the whole range of interface interaction strengths (weak physisorption to strong chemisorption).

1,436 citations

Journal ArticleDOI
TL;DR: The thermoelectric properties of various poly(3,4-ethylenedioxythiophene) samples are measured, and a marked increase in the Seebeck coefficient is observed when the electrical conductivity is enhanced through molecular organization, which initiates the transition from a Fermi glass to a semi-metal.
Abstract: Polymers are lightweight, flexible, solution-processable materials that are promising for low-cost printed electronics as well as for mass-produced and large-area applications. Previous studies dem ...

705 citations

Journal ArticleDOI
TL;DR: In this article, the effect of GOPS on the electrical and electronic properties of poly(3,4-ethylenedioxythiophene) doped with poly(styrenesulfonate) (PEDOT:PSS) was investigated.
Abstract: Poly(3,4-ethylenedioxythiophene) doped with poly(styrenesulfonate) (PEDOT:PSS) has been reported as a successful functional material in a broad variety of applications. One of the most important advantages of PEDOT:PSS is its water-solubility, which enables simple and environmental friendly manufacturing processes. Unfortunately, this also implies that pristine PEDOT:PSS films are unsuitable for applications in aqueous environments. To reach stability in polar solvents, (3-glycidyloxypropyl)trimethoxysilane (GOPS) is typically used to cross-link PEDOT:PSS. Although this strategy is widely used, its mechanism and effect on PEDOT:PSS performance have not been articulated yet. Here, we present a broad study that provides a better understanding of the effect of GOPS on the electrical and electronic properties of PEDOT:PSS. We show that the GOPS reacts with the sulfonic acid group of the excess PSS, causing a change in the PEDOT:PSS film morphology, while the oxidation level of PEDOT remains unaffected. This is at the origin of the observed conductivity changes. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017, 55, 814–820

162 citations

Journal ArticleDOI
TL;DR: In this paper, a transition between two different energy level alignment regimes has been observed: namely vacuum level alignment and Fermi level pinning, which is associated with spontaneous positive charge transfer across the interface to the organic semiconductors above a certain material-specific threshold value of ϕ s.

132 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: In this article, the authors showed that PFN can be incorporated into polymer light-emitting devices (PLEDs) to enhance electron injection from high-work-function metals such as aluminium (work function w of 4.3 eV) and gold (w ¼ 5.2 eV).
Abstract: typically based on n-type metal oxides, our device is solutionprocessed at room temperature, enabling easy processibility over a large area. Accordingly, the approach is fully amenable to highthroughput roll-to-roll manufacturing techniques, may be used to fabricate vacuum-deposition-free PSCs of large area, and find practical applications in future mass production. Moreover, our discovery overturns a well-accepted belief (the inferior performance of inverted PSCs) and clearly shows that the characteristics of high performance, improved stability and ease of use can be integrated into a single device, as long as the devices are optimized, both optically and electrically, by means of a meticulously designed device structure. We also anticipate that our findings will catalyse the development of new device structures and may move the efficiency of devices towards the goal of 10% for various material systems. Previously, we reported that PFN can be incorporated into polymer light-emitting devices (PLEDs) to enhance electron injection from high-work-function metals such as aluminium (work function w of 4.3 eV) 22,23 and has thus been used to realize high-efficiency, air-stable PLEDs 24 . Furthermore, we also found that efficient electron injection can be obtained even in the most noble metals with extremely high work functions, such as gold (w ¼ 5.2 eV), by lowering the effective work function (for example lowering w in gold by 1.0 eV), which has previously been ascribed to the formation of a strong interface dipole 25 .

3,651 citations

Journal ArticleDOI
TL;DR: Simultaneous enhancement of open-circuit voltage, short-circuits current density, and fill factor in highly efficient polymer solar cells by incorporating an alcohol/water-soluble conjugated polymer as cathode interlayer is domonstrated.
Abstract: Simultaneous enhancement of open-circuit voltage, short-circuit current density, and fill factor in highly efficient polymer solar cells by incorporating an alcohol/water-soluble conjugated polymer as cathode interlayer is domonstrated. When combined with a low-bandgap polymer PTB7 as the electron donor material, the power efficiency of the devices is improved to a certified 8.370%. Due to the drastic improvement in efficiency and easy utilization, this method opens new opportunities for PSCs from various material systems to improve towards 10% efficiency.

2,019 citations

Journal ArticleDOI
20 Nov 2015-Science
TL;DR: Heavy doped inorganic charge extraction layers in planar PSCs were used to achieve very rapid carrier extraction, even with 10- to 20-nanometer-thick layers, avoiding pinholes and eliminating local structural defects over large areas.
Abstract: The recent dramatic rise in power conversion efficiencies (PCEs) of perovskite solar cells (PSCs) has triggered intense research worldwide. However, high PCE values have often been reached with poor stability at an illuminated area of typically less than 0.1 square centimeter. We used heavily doped inorganic charge extraction layers in planar PSCs to achieve very rapid carrier extraction, even with 10- to 20-nanometer-thick layers, avoiding pinholes and eliminating local structural defects over large areas. The robust inorganic nature of the layers allowed for the fabrication of PSCs with an aperture area >1 square centimeter that have a PCE >15%, as certified by an accredited photovoltaic calibration laboratory. Hysteresis in the current-voltage characteristics was eliminated; the PSCs were stable, with >90% of the initial PCE remaining after 1000 hours of light soaking.

1,936 citations

Journal ArticleDOI
TL;DR: A solution-processed lead halide perovskite solar cell that has p-type NiO(x) and n-type ZnO nanoparticles as hole and electron transport layers, respectively, and shows improved stability against water and oxygen degradation when compared with devices with organic charge transport layers is reported.
Abstract: Lead halide perovskite solar cells have recently attracted tremendous attention because of their excellent photovoltaic efficiencies. However, the poor stability of both the perovskite material and the charge transport layers has so far prevented the fabrication of devices that can withstand sustained operation under normal conditions. Here, we report a solution-processed lead halide perovskite solar cell that has p-type NiOx and n-type ZnO nanoparticles as hole and electron transport layers, respectively, and shows improved stability against water and oxygen degradation when compared with devices with organic charge transport layers. Our cells have a p–i–n structure (glass/indium tin oxide/NiOx/perovskite/ZnO/Al), in which the ZnO layer isolates the perovskite and Al layers, thus preventing degradation. After 60 days storage in air at room temperature, our all-metal-oxide devices retain about 90% of their original efficiency, unlike control devices made with organic transport layers, which undergo a complete degradation after just 5 days. The initial power conversion efficiency of our devices is 14.6 ± 1.5%, with an uncertified maximum value of 16.1%. Using metal oxides for both the hole- and electron-transport layers in perovskite solar cells significantly improves their stability compared with devices containing organic transport layers.

1,834 citations

Journal ArticleDOI
TL;DR: A review of recent work on modeling of organic/metal and organic/organic interfaces can be found in this article, where the strength of the interaction at the interface has been used as the main factor.
Abstract: In this Review, we summarize recent work on modeling of organic/metal and organic/organic interfaces. Some of the models discussed have a semiempirical approach, that is, experimentally derived values are used in combination with theory, and others rely completely of calculations. The models are categorized according to the types of interfaces they apply to, and the strength of the interaction at the interface has been used as the main factor. We explain the basics of the models, their use, and give examples on how the models correlate with experimental results. We stress that given the complexity of organic/metal and organic/organic interface formation, it is crucial to know the exact way in which the interface was formed before choosing the model that is applicable, as none of the models presented covers the whole range of interface interaction strengths (weak physisorption to strong chemisorption).

1,436 citations