scispace - formally typeset
Search or ask a question
Author

Soban Q. Khan

Bio: Soban Q. Khan is an academic researcher from University of Dammam. The author has contributed to research in topics: Medicine & Acrylic resin. The author has an hindex of 8, co-authored 34 publications receiving 229 citations.

Papers published on a yearly basis

Papers
More filters
Journal ArticleDOI
TL;DR: The prevalence of dental caries in primary and permanent teeth was not found to be as high as other researchers reported from different cities of KSA, still the prevalence was high considering the World Health Organization future oral health goals.
Abstract: Objectives: To determine the prevalence of dental caries in the primary and permanent teeth, and evaluate the brushing habits of school children in Dammam, Kingdom of Saudi Arabia (KSA). Methods. This study was conducted at Dammam, KSA. Oral examination of the participants was conducted from February to May 2014. The total sample size for this cross-sectional study was 711. There were 397 children between the age of 6-9 years, who were examined for primary teeth caries, and 314 between the age 10-12 years were examined for permanent teeth caries. Primary and permanent dentitions were studied for decayed, missing, and filled teeth (dmft [primary teeth], DMFT [permanent teeth]). Results: The overall prevalence of dental caries in primary and permanent teeth was almost 73% (n=711). Among the 6-9-year-old, the prevalence of caries was approximately 78% (n=397) whereas, among the 10-12-year-old children, it was approximately 68% (n=314). Mean dmft value among the 6-9-year-olds was 3.66±3.13 with decayed (d) component of 3.28±2.92, missing (m) component of 0.11±0.69, and filled (f) component of 0.26±0.9. Mean DMFT value among the 10-12-year-old children was 1.94±2.0 with decayed (D) component of 1.76±1.85, missing (M) component of 0.03±0.22, and filled (F) of component 0.15±0.73. Daily tooth brushing had a positive effect on caries prevention, and this effect was statistically significant for caries in primary teeth. Conclusion: Although the prevalence of dental caries in primary and permanent teeth was not found to be as high as other researchers reported from different cities of KSA, still the prevalence was high considering the World Health Organization future oral health goals. Awareness should be provided to students, as well as, teachers and parents regarding the importance of good brushing habits and regular dental visits. Saudi Med J 2015; Vol. 36 (6): 737-742 doi: 10.15537/smj.2015.6.10888

80 citations

Journal Article
TL;DR: The results in this study present a high decayed, missing, and filled teeth score in the adult and young population of Saudi Arabia, however, more published data is required as the results obtained from this meta analysis may not give a true picture, and reality may be worse.
Abstract: Objectives: To determine the prevalence of caries in the primary and permanent teeth in a Saudi population. Methods: This study was conducted at the College of Dentistry, University of Dammam, Dammam, Kingdom of Saudi Arabia. In June 2010, a literature search was started and found all studies conducted in Saudi Arabia on dental caries from 1999 to 2008. Sixty articles were found on PubMed, which had been published during the considered time period. Sixteen studies were passed through inclusion criteria and included in analysis. A 2 to 12-year-old Saudi population was included to determine the prevalence of caries in primary teeth, and for permanent teeth, the age range was 6-18 years. Results: The prevalence of caries in primary and permanent teeth were analyzed separately. Forest plot and Chi-square test revealed considerable heterogeneity. A random effect model was used to find caries prevalence in primary and permanent teeth. The mean decayed, missing and filled teeth (dmft) was 5.38 (95% CI: 4.314 - 6.436), and in the permanent teeth the DMFT was 3.34 (95% CI: 1.97 - 4.75). Publication bias diagnostics suggested possible overestimation of caries prevalence in permanent teeth but not in primary teeth. Conclusion: The results in this study present a high decayed, missing, and filled teeth score in the adult and young population of Saudi Arabia, however, more published data is required as the results obtained from this meta analysis may not give a true picture, and reality may be worse.

57 citations

Journal ArticleDOI
TL;DR: In this article, the authors evaluated the flexural strength, impact strength, hardness, and surface roughness of 3D-printed denture base resins subjected to thermal cycling treatment.
Abstract: PURPOSE This in vitro study evaluated the flexural strength, impact strength, hardness, and surface roughness of 3D-printed denture base resin subjected to thermal cycling treatment. MATERIALS AND METHODS According to ISO 20795-1:2013 standards, 120 acrylic resin specimens (40/flexural strength test, 40/impact strength, and 40/surface roughness and hardness test, n = 10) were fabricated and distributed into two groups: heat-polymerized; (Major.Base.20) as control and 3D-printed (NextDent) as experimental group. Half of the specimens of each group were subjected to 10,000 thermal cycles of 5 to 55°C simulating 1 year of clinical use. Flexural strength (MPa), impact strength (KJ/m2 ), hardness (VHN), and surface roughness (μm) were measured using universal testing machine, Charpy's impact tester, Vickers hardness tester, and profilometer, respectively. Data were analyzed by ANOVA and Tukey honestly significant difference (HSD) test (α = 0.05). RESULTS The values of flexural strength (MPa) were 86.63 ± 1.0 and 69.15 ± 0.88; impact strength (KJ/m2 )-6.32 ± 0.50 and 2.44 ± 0.31; hardness (VHN)-41.63 ± 2.03 and 34.62 ± 2.1; and surface roughness (μm)-0.18 ± 0.01 and 0.12 ± 0.02 for heat-polymerized and 3D-printed denture base materials, respectively. Significant differences in all tested properties were recorded between heat-polymerized and 3D-printed denture base materials (P < 0.001). Thermal cycling significantly lowered the flexural strength (63.93 ± 1.54 MPa), impact strength (2.40 ± 0.35 KJ/m2 ), and hardness (30.17 ± 1.38 VHN) of 3D-printed resin in comparison to thermal cycled heat-polymerized resin, but surface roughness showed non-significant difference (p = 0.262). CONCLUSION 3D-printed resin had inferior flexural strength, impact strength, and hardness values than heat-polymerized resin, but showed superior surface roughness. Temperature changes (thermal cycling) significantly reduced the hardness and flexural strength and increased surface roughness, but did not affect the impact strength.

46 citations

Journal ArticleDOI
TL;DR: The incidence of carie in primary teeth was found to be high compared with caries in permanent teeth in the Arab League, and a meta-analysis was run by using data extracted from the studies included.

24 citations

Journal ArticleDOI
TL;DR: Coating of removable prosthesis with nano-coat, Optiglaze, or nano-silica is an effective method to reduce C. albicans adhesion to polymethyl methacrylate denture base materials.
Abstract: PURPOSE To evaluate the effect of protective coatings on the surface roughness, contact angle, and Candida albicans (C. albicans) adhesion to polymethyl methacrylate (PMMA) denture base materials. MATERIAL AND METHODS A total of 560 rectangular heat- and autopolymerized acrylic resin specimens were fabricated and divided into 5 groups (n = 14/group) according to coating agent. Uncoated specimens were used as control. Coating materials were: nano-coat, Optiglaze, nano-silica, or cyanoacrylate. Surface roughness (Ra ) was evaluated using a profilometer. Contact angle measurements were performed using the sessile drop method. C. albicans adhesion was evaluated using direct culture and slide count methods. ANOVA and Tukey's post hoc tests were used for data analysis (α = 0.05). RESULTS Nano-coat and Optiglaze coating of heat-polymerized acrylic significantly decreased Ra (p < 0.001). No significant effect was seen with nano-silica coating while Ra significantly increased with cyanoacrylate (p < 0.001). For autopolymerized acrylic, nano-coat, Optiglaze, and nano-silica coatings significantly decreased Ra in comparison to control group (p < 0.001) while no significant difference was seen between control and cyanoacrylate coating (p = 0.45). In comparison to control group, nano-coat, Optiglaze, and nano-silica coating for both denture base materials significantly decreased contact angle, and C. albicans adhesion (p < 0.001) while cyanoacrylate significantly increased C. albicans adhesion (p = 0.002) with no effect on contact angle for heat- (p = 1.00) and autopolymerized resins (p = 0.83). CONCLUSION Coating of removable prosthesis with nano-coat, Optiglaze, or nano-silica is an effective method to reduce C. albicans adhesion.

23 citations


Cited by
More filters
01 Jan 2006
TL;DR: In this article, the authors describe pharmacy education in 3 Middle East countries: Jordan, Kuwait, and Saudi Arabia, and describe teaching methods in all three countries combining traditional didactic lecturing and problem-based learning.
Abstract: The practice of pharmacy, as well as pharmacy education, varies significantly throughout the world. In Jordan, Kuwait, and Saudi Arabia, the profession of pharmacy appears to be on the ascendance. This is demonstrated by an increase in the number of pharmacy schools and the number of pharmacy graduates from pharmacy programs. One of the reasons pharmacy is on the ascendance in these countries is government commitment to fund and support competitive, well-run pharmacy programs. In this report we describe pharmacy education in 3 Middle East countries: Jordan, Kuwait, and Saudi Arabia. All 3 countries offer bachelor of pharmacy (BPharm) degrees. In addition, 2 universities in Jordan and 1 in Saudi Arabia offer PharmD degree programs. The teaching methods in all 3 countries combine traditional didactic lecturing and problem-based learning. Faculties of pharmacy in all 3 countries are well staffed and offer competitive remuneration. All 3 countries have a policy of providing scholarships to local students for postgraduate training abroad. The majority of students in Jordan and Kuwait are female, while the ratio of male to female students in Saudi Arabia is even. Students’ attitudes towards learning are generally positive in all 3 countries. In Saudi Arabia and Kuwait, most pharmacy graduates work in the public sector, while in Jordan, the majority work in the private sector.

95 citations

Journal ArticleDOI
TL;DR: The prevalence of primary and permanent dental caries in children in the world was found to be high and appropriate strategies should be implemented to improve the aforementioned situation and to troubleshoot and monitor at all levels by providing feedback to hospitals.
Abstract: Early childhood caries (ECC) is a type of dental caries in the teeth of infants and children that is represented as one of the most prevalent dental problems in this period. Various studies have reported different types of prevalence of dental caries in primary and permanent teeth in children worldwide. However, there has been no comprehensive study to summarize the results of these studies in general, so this study aimed to determine the prevalence of dental caries in primary and permanent teeth in children in different continents of the world during a systematic review and meta-analysis. In this review study, articles were extracted by searching in the national and international databases of SID, MagIran, IranMedex, IranDoc, Cochrane, Embase, ScienceDirect, Scopus, PubMed, and Web of Science (ISI) between 1995 and December 2019. Random effects model was used for analysis and heterogeneity of studies was evaluated by using the I2 index. Data were analyzed by using the Comprehensive Meta-Analysis (Version 2) software. In this study, a total of 164 articles (81 articles on the prevalence of dental caries in primary teeth and 83 articles on the prevalence of dental caries in permanent teeth) were entered the meta-analysis. The prevalence of dental caries in primary teeth in children in the world with a sample size of 80,405 was 46.2% (95% CI: 41.6–50.8%), and the prevalence of dental caries in permanent teeth in children in the world with a sample size of 1,454,871 was 53.8% (95% CI: 50–57.5%). Regarding the heterogeneity on the basis of meta-regression analysis, there was a significant difference in the prevalence of dental caries in primary and permanent teeth in children in different continents of the world. With increasing the sample size and the year of study, dental caries in primary teeth increased and in permanent teeth decreased. The results of this study showed that the prevalence of primary and permanent dental caries in children in the world was found to be high. Therefore, appropriate strategies should be implemented to improve the aforementioned situation and to troubleshoot and monitor at all levels by providing feedback to hospitals.

95 citations

Journal ArticleDOI
23 Feb 2015-PLOS ONE
TL;DR: There is an urgent need for primary clinical research of good quality in most clinically-relevant domains in pediatric dentistry.
Abstract: Objectives To identify, appraise and summarize existing knowledge and knowledge gaps in practicerelevant questions in pediatric dentistry.

81 citations

Journal ArticleDOI
TL;DR: The prevalence of dental caries in primary and permanent teeth was not found to be as high as other researchers reported from different cities of KSA, still the prevalence was high considering the World Health Organization future oral health goals.
Abstract: Objectives: To determine the prevalence of dental caries in the primary and permanent teeth, and evaluate the brushing habits of school children in Dammam, Kingdom of Saudi Arabia (KSA). Methods. This study was conducted at Dammam, KSA. Oral examination of the participants was conducted from February to May 2014. The total sample size for this cross-sectional study was 711. There were 397 children between the age of 6-9 years, who were examined for primary teeth caries, and 314 between the age 10-12 years were examined for permanent teeth caries. Primary and permanent dentitions were studied for decayed, missing, and filled teeth (dmft [primary teeth], DMFT [permanent teeth]). Results: The overall prevalence of dental caries in primary and permanent teeth was almost 73% (n=711). Among the 6-9-year-old, the prevalence of caries was approximately 78% (n=397) whereas, among the 10-12-year-old children, it was approximately 68% (n=314). Mean dmft value among the 6-9-year-olds was 3.66±3.13 with decayed (d) component of 3.28±2.92, missing (m) component of 0.11±0.69, and filled (f) component of 0.26±0.9. Mean DMFT value among the 10-12-year-old children was 1.94±2.0 with decayed (D) component of 1.76±1.85, missing (M) component of 0.03±0.22, and filled (F) of component 0.15±0.73. Daily tooth brushing had a positive effect on caries prevention, and this effect was statistically significant for caries in primary teeth. Conclusion: Although the prevalence of dental caries in primary and permanent teeth was not found to be as high as other researchers reported from different cities of KSA, still the prevalence was high considering the World Health Organization future oral health goals. Awareness should be provided to students, as well as, teachers and parents regarding the importance of good brushing habits and regular dental visits. Saudi Med J 2015; Vol. 36 (6): 737-742 doi: 10.15537/smj.2015.6.10888

80 citations