Sócrates O. Dantas

Bio: Sócrates O. Dantas is an academic researcher from Universidade Federal de Juiz de Fora. The author has contributed to research in topics: Carbon nanotube & Poisson's ratio. The author has an hindex of 19, co-authored 47 publications receiving 2985 citations. Previous affiliations of Sócrates O. Dantas include Linköping University & State University of Campinas.

Carbon Structures with Three-Dimensional Periodicity at Optical Wavelengths

Abstract: Porous carbons that are three-dimensionally periodic on the scale of optical wavelengths were made by a synthesis route resembling the geological formation of natural opal. Porous silica opal crystals were sintered to form an intersphere interface through which the silica was removed after infiltration with carbon or a carbon precursor. The resulting porous carbons had different structures depending on synthesis conditions. Both diamond and glassy carbon inverse opals resulted from volume filling. Graphite inverse opals, comprising 40-angstrom-thick layers of graphite sheets tiled on spherical surfaces, were produced by surface templating. The carbon inverse opals provide examples of both dielectric and metallic optical photonic crystals. They strongly diffract light and may provide a route toward photonic band-gap materials.

Molecular-dynamics simulations of carbon nanotubes as gigahertz oscillators.

Abstract: Recently, Zheng and Jiang [Phys Rev Lett 88, 045503 (2002)] have proposed that multiwalled carbon nanotubes could be the basis for a new generation of nano-oscillators in the several gigahertz range In this Letter, we present the first molecular dynamics simulation for these systems Different nanotube types were considered in order to verify the reliability of such devices as gigahertz oscillators Our results show that these nano-oscillators are dynamically stable when the radii difference values between inner and outer tubes are of $\ensuremath{\sim}34\text{ }\AA{}$ Frequencies as large as 38 GHz were observed, and the calculated force values are in good agreement with recent experimental investigations

Materials with Negative Compressibilities in One or More Dimensions

Abstract: Rare crystal phases that expand in one or more dimensions when hydrostatically compressed are identified and shown to have negative Poisson's ratios. Some of these crystals (i) decrease volume and expand in two dimensions when stretched in a particular direction and (ii) increase surface area when hydrostatically compressed. Possible mechanisms for achieving such negative linear and area compressibilities are described for single crystals and composites, and sensor applications are proposed. Materials with these properties may be used to fabricate porous solids that either expand in all directions when hydrostatically compressed with a penetrating fluid or behave as if they are incompressible.

Sign Change of Poisson's Ratio for Carbon Nanotube Sheets

Abstract: Most materials shrink laterally like a rubber band when stretched, so their Poisson's ratios are positive. Likewise, most materials contract in all directions when hydrostatically compressed and decrease density when stretched, so they have positive linear compressibilities. We found that the in-plane Poisson's ratio of carbon nanotube sheets (buckypaper) can be tuned from positive to negative by mixing single-walled and multiwalled nanotubes. Density-normalized sheet toughness, strength, and modulus were substantially increased by this mixing. A simple model predicts the sign and magnitude of Poisson's ratio for buckypaper from the relative ease of nanofiber bending and stretch, and explains why the Poisson's ratios of ordinary writing paper are positive and much larger. Theory also explains why the negative in-plane Poisson's ratio is associated with a large positive Poisson's ratio for the sheet thickness, and predicts that hydrostatic compression can produce biaxial sheet expansion. This tunability of Poisson's ratio can be exploited in the design of sheet-derived composites, artificial muscles, gaskets, and chemical and mechanical sensors.

Gigahertz nanomechanical oscillators based on carbon nanotubes

Abstract: We report molecular dynamics studies of carbon nanotubes as mechanical gigahertz oscillators. Our results show that different oscillatory regimes exist but that sustained oscillations are possible only when the radii difference values of the inner and outer tubes are . Frequencies as large as 87 GHz were obtained. Calculated force and frequency values are in good agreement with estimated data from recent experimental investigations.

Photonic crystals

Abstract: The term photonic crystals appears because of the analogy between electron waves in crystals and the light waves in artificial periodic dielectric structures. During the recent years the investigation of one-, two-and three-dimensional periodic structures has attracted a widespread attention of the world optics community because of great potentiality of such structures in advanced applied optical fields. The interest in periodic structures has been stimulated by the fast development of semiconductor technology that now allows the fabrication of artificial structures, whose period is comparable with the wavelength of light in the visible and infrared ranges.

Science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems

Abstract: We present the science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems, targeting an evolution in technology, that might lead to impacts and benefits reaching into most areas of society. This roadmap was developed within the framework of the European Graphene Flagship and outlines the main targets and research areas as best understood at the start of this ambitious project. We provide an overview of the key aspects of graphene and related materials (GRMs), ranging from fundamental research challenges to a variety of applications in a large number of sectors, highlighting the steps necessary to take GRMs from a state of raw potential to a point where they might revolutionize multiple industries. We also define an extensive list of acronyms in an effort to standardize the nomenclature in this emerging field.

Synthetic molecular motors and mechanical machines.

Abstract: The widespread use of controlled molecular-level motion in key natural processes suggests that great rewards could come from bridging the gap between the present generation of synthetic molecular systems, which by and large rely upon electronic and chemical effects to carry out their functions, and the machines of the macroscopic world, which utilize the synchronized movements of smaller parts to perform specific tasks. This is a scientific area of great contemporary interest and extraordinary recent growth, yet the notion of molecular-level machines dates back to a time when the ideas surrounding the statistical nature of matter and the laws of thermodynamics were first being formulated. Here we outline the exciting successes in taming molecular-level movement thus far, the underlying principles that all experimental designs must follow, and the early progress made towards utilizing synthetic molecular structures to perform tasks using mechanical motion. We also highlight some of the issues and challenges that still need to be overcome.

Synthesis of highly ordered carbon molecular sieves via template-mediated structural transformation

Abstract: Ordered carbon molecular sieves exhibiting Bragg diffraction of X-ray lines have been synthesized for the first time, using mesoporous silica molecular sieves as the template. Sucrose was converted to carbon inside the mesopores of the silica molecular sieves through a mild carbonization process using a sulfuric acid catalyst. The carbon molecular sieves were obtained after the removal of the silica framework using an aqueous solution of sodium hydroxide. The X-ray diffraction, transmission electron microscopy, and pore size analysis showed that the structure of the carbon molecular sieves consisted of a three-dimensional regular array of uniform mesopores 3 nm in diameter. The structure was not simply a negative replica of the used silica template, but the synthesis mechanism involved the unique transformation into a new ordered array that was triggered by the removal of the silica frameworks. The highly ordered mesoporous texture suggested its scientific and technological importance as a new shape-selec...

Recent Progress in the Synthesis of Porous Carbon Materials

Abstract: In this review, the progress made in the last ten years concerning the synthesis of porous carbon materials is summarized. Porous carbon materials with various pore sizes and pore structures have been synthesized using several different routes. Microporous activated carbons have been synthesized through the activation process. Ordered microporous carbon materials have been synthesized using zeolites as templates. Mesoporous carbons with a disordered pore structure have been synthesized using various methods, including catalytic activation using metal species, carbonization of polymer/polymer blends, carbonization of organic aerogels, and template synthesis using silica nanoparticles. Ordered mesoporous carbons with various pore structures have been synthesized using mesoporous silica materials such as MCM-48, HMS, SBA-15, MCF, and MSU-X as templates. Ordered mesoporous carbons with graphitic pore walls have been synthesized using soft-carbon sources that can be converted to highly ordered graphite at high temperature. Hierarchically ordered mesoporous carbon materials have been synthesized using various designed silica templates. Some of these mesoporous carbon materials have successfully been used as adsorbents for bulky pollutants, as electrodes for supercapacitors and fuel cells, and as hosts for enzyme immobilization. Ordered macroporous carbon materials have been synthesized using colloidal crystals as templates. One-dimensional carbon nanostructured materials have been fabricated using anodic aluminum oxide (AAO) as a template.