Sophie Belamari

Bio: Sophie Belamari is an academic researcher from Centre national de la recherche scientifique. The author has contributed to research in topics: Mediterranean sea & Convection. The author has an hindex of 8, co-authored 11 publications receiving 880 citations.

The SURFEXv7.2 land and ocean surface platform for coupled or offline simulation of earth surface variables and fluxes

Abstract: . SURFEX is a new externalized land and ocean surface platform that describes the surface fluxes and the evolution of four types of surfaces: nature, town, inland water and ocean. It is mostly based on pre-existing, well-validated scientific models that are continuously improved. The motivation for the building of SURFEX is to use strictly identical scientific models in a high range of applications in order to mutualise the research and development efforts. SURFEX can be run in offline mode (0-D or 2-D runs) or in coupled mode (from mesoscale models to numerical weather prediction and climate models). An assimilation mode is included for numerical weather prediction and monitoring. In addition to momentum, heat and water fluxes, SURFEX is able to simulate fluxes of carbon dioxide, chemical species, continental aerosols, sea salt and snow particles. The main principles of the organisation of the surface are described first. Then, a survey is made of the scientific module (including the coupling strategy). Finally, the main applications of the code are summarised. The validation work undertaken shows that replacing the pre-existing surface models by SURFEX in these applications is usually associated with improved skill, as the numerous scientific developments contained in this community code are used to good advantage.

HyMeX-SOP1: The Field Campaign Dedicated to Heavy Precipitation and Flash Flooding in the Northwestern Mediterranean

Abstract: The Mediterranean region is frequently affected by heavy precipitation events associated with flash floods, landslides, and mudslides that cause hundreds of millions of euros in damages per year and often, casualties. A major field campaign was devoted to heavy precipitation and flash floods from 5 September to 6 November 2012 within the framework of the 10-year international HyMeX (Hydrological cycle in the Mediterranean Experiment) dedicated to the hydrological cycle and related high-impact events. The 2- month field campaign took place over the Northwestern Mediterranean Sea and its surrounding coastal regions in France, Italy, and Spain. The observation strategy of the field experiment was devised to improve our knowledge on the following key components leading to heavy precipitation and flash flooding in the region: i) the marine atmospheric flows that transport moist and conditionally unstable air towards the coasts; ii) the Mediterranean Sea acting as a moisture and energy source; iii) the dynamics and microphysics of the convective systems producing heavy precipitation; iv) the hydrological processes during flash floods. This article provides the rationale for developing this first HyMeX field experiment and an overview of its design and execution. Highlights of some Intense Observation Periods illustrate the potential of the unique datasets collected for process understanding, model improvement and data assimilation.

High resolution modeling of dense water formation in the north-western Mediterranean during winter 2012-2013: Processes and budget

Abstract: The evolution of the stratification of the north-western Mediterranean between summer 2012 and the end of winter 2013 was simulated and compared with different sets of observations. A summer cruise and profiler observations were used to improve the initial conditions of the simulation. This improvement was crucial to simulate winter convection. Variations of some parameters involved in air - sea exchanges (wind, coefficient of transfer used in the latent heat flux formulation, and constant additive heat flux) showed that the characteristics of water masses and the volume of dense water formed during convection cannot be simply related to the time-integrated buoyancy budget over the autumn - winter period. The volume of dense water formed in winter was estimated to be about 50,000 km 3 with a density anomaly larger than 29.113 kg m -3 . The effect of advection and air/sea fluxes on the heat and salt budget of the convection zone was quantified during the preconditioning phase and the mixing period. Destratification of the surface layer in autumn occurs through an interaction of surface and Ekman buoyancy fluxes associated with displacements of the North Balearic front bounding the convection zone to the south. During winter convection, advection stratifies the convection zone: from December to March, the absolute value of advection represents 58 % of the effect of surface buoyancy fluxes.

HyMeX-SOP2: The field campaign dedicated to dense water formation in the northwestern Mediterranean

Abstract: The HYdrological cycle in the Mediterranean Experiment (HyMeX) Special Observing Period 2 (SOP2, January 27–March 15, 2013) was dedicated to the study of dense water formation in the Gulf of Lion in the northwestern Mediterranean. This paper outlines the deep convection of winter 2012–2013 and the meteorological conditions that produced it. Alternating phases of mixing and restratification are related to periods of high and low heat losses, respectively. High-resolution, realistic, three-dimensional models are essential for assessing the intricacy of buoyancy fluxes, horizontal advection, and convective processes. At the submesoscale, vertical velocities resulting from symmetric instabilities of the density front bounding the convection zone are crucial for ventilating the deep ocean. Finally, concomitant atmospheric and oceanic data extracted from the comprehensive SOP2 data set highlight the rapid, coupled evolution of oceanic and atmospheric boundary layer characteristics during a strong wind event.

A 1 year sea surface heat budget in the northeastern Atlantic basin during the POMME experiment: 2. Flux optimization

Abstract: [1] Gridded air-sea fluxes were computed during a 1 year period by applying a synthesis approach (Caniaux et al., 2005) as part of the Programme Ocean Multidisciplinaire Meso Echelle (POMME) (September 2000–October 2001 in the northeast Atlantic 21°–15°W, 38°–45°N). In the present paper we address the question of adjusting the precipitation and turbulent surface fluxes so that the corresponding heat, salt, and momentum budgets are in agreement with the evolution of the thermal and salt contents deduced from the data collected during the experiment. The proposed method is based on the one-dimensional modeling of the whole POMME area by solving specific temperature and salinity equations (including advective terms) and on the optimization of adjustable coefficients with a genetic algorithm. Adjusted fluxes allow us to simulate the average sea surface temperature and salinity with errors less than 0.02°C and 0.02 psu, respectively, over 1 year. The corresponding new surface heat budget indicates that the adjusted annual net heat (+17 W m−2) is weaker than previously calculated (+33 W m−2) but remains positive, meaning a heat gain for the ocean. The adjusted annual salt budget reveals a net evaporation of 0.75 mm d−1 for the POMME region. In contrast with climatology we find that the zone is located southward of the null buoyancy flux area during September 2000–September 2001.

The SURFEXv7.2 land and ocean surface platform for coupled or offline simulation of earth surface variables and fluxes

Abstract: . SURFEX is a new externalized land and ocean surface platform that describes the surface fluxes and the evolution of four types of surfaces: nature, town, inland water and ocean. It is mostly based on pre-existing, well-validated scientific models that are continuously improved. The motivation for the building of SURFEX is to use strictly identical scientific models in a high range of applications in order to mutualise the research and development efforts. SURFEX can be run in offline mode (0-D or 2-D runs) or in coupled mode (from mesoscale models to numerical weather prediction and climate models). An assimilation mode is included for numerical weather prediction and monitoring. In addition to momentum, heat and water fluxes, SURFEX is able to simulate fluxes of carbon dioxide, chemical species, continental aerosols, sea salt and snow particles. The main principles of the organisation of the surface are described first. Then, a survey is made of the scientific module (including the coupling strategy). Finally, the main applications of the code are summarised. The validation work undertaken shows that replacing the pre-existing surface models by SURFEX in these applications is usually associated with improved skill, as the numerous scientific developments contained in this community code are used to good advantage.

Evaluation of CMIP6 DECK Experiments With CNRM-CM6-1

Abstract: This paper describes the main characteristics of CNRM-CM6-1, the fully coupled atmosphere-ocean general circulation model of sixth generation jointly developed by Centre National de Recherches Meteorologiques (CNRM) and Cerfacs for the sixth phase of the Coupled Model Intercomparison Project 6 (CMIP6). The paper provides a description of each component of CNRM-CM6-1, including the coupling method and the new online output software. We emphasize where model's components have been updated with respect to the former model version, CNRM-CM5.1. In particular, we highlight major improvements in the representation of atmospheric and land processes. A particular attention has also been devoted to mass and energy conservation in the simulated climate system to limit long-term drifts. The climate simulated by CNRM-CM6-1 is then evaluated using CMIP6 historical and Diagnostic, Evaluation and Characterization of Klima (DECK) experiments in comparison with CMIP5 CNRM-CM5.1 equivalent experiments. Overall, the mean surface biases are of similar magnitude but with different spatial patterns. Deep ocean biases are generally reduced, whereas sea ice is too thin in the Arctic. Although the simulated climate variability remains roughly consistent with CNRM-CM5.1, its sensitivity to rising CO 2 has increased: the equilibrium climate sensitivity is 4.9 K, which is now close to the upper bound of the range estimated from CMIP5 models.

Oceanic vertical mixing: a review and a model with a nonlocal boundary layer parameterization

Abstract: If model parameterizations of unresolved physics, such as the variety of upper ocean mixing processes, are to hold over the large range of time and space scales of importance to climate, they must be strongly physically based. Observations, theories, and models of oceanic vertical mixing are surveyed. Two distinct regimes are identified: ocean mixing in the boundary layer near the surface under a variety of surface forcing conditions (stabilizing, destabilizing, and wind driven), and mixing in the ocean interior due to internal waves, shear instability, and double diffusion (arising from the different molecular diffusion rates of heat and salt). Mixing schemes commonly applied to the upper ocean are shown not to contain some potentially important boundary layer physics. Therefore a new parameterization of oceanic boundary layer mixing is developed to accommodate some of this physics. It includes a scheme for determining the boundary layer depth h, where the turbulent contribution to the vertical shear of a bulk Richardson number is parameterized. Expressions for diffusivity and nonlocal transport throughout the boundary layer are given. The diffusivity is formulated to agree with similarity theory of turbulence in the surface layer and is subject to the conditions that both it and its vertical gradient match the interior values at h. This nonlocal “K profile parameterization” (KPP) is then verified and compared to alternatives, including its atmospheric counterparts. Its most important feature is shown to be the capability of the boundary layer to penetrate well into a stable thermocline in both convective and wind-driven situations. The diffusivities of the aforementioned three interior mixing processes are modeled as constants, functions of a gradient Richardson number (a measure of the relative importance of stratification to destabilizing shear), and functions of the double-diffusion density ratio, Rρ. Oceanic simulations of convective penetration, wind deepening, and diurnal cycling are used to determine appropriate values for various model parameters as weak functions of vertical resolution. Annual cycle simulations at ocean weather station Papa for 1961 and 1969–1974 are used to test the complete suite of parameterizations. Model and observed temperatures at all depths are shown to agree very well into September, after which systematic advective cooling in the ocean produces expected differences. It is argued that this cooling and a steady salt advection into the model are needed to balance the net annual surface heating and freshwater input. With these advections, good multiyear simulations of temperature and salinity can be achieved. These results and KPP simulations of the diurnal cycle at the Long-Term Upper Ocean Study (LOTUS) site are compared with the results of other models. It is demonstrated that the KPP model exchanges properties between the mixed layer and thermocline in a manner consistent with observations, and at least as well or better than alternatives.

HYMEX , a 10-year Multidisciplinary Program on the mediterranean water cycle.

Abstract: The Mediterranean countries are experiencing important challenges related to the water cycle, including water shortages and floods, extreme winds, and ice/snow storms, that impact critically the socioeconomic vitality in the area (causing damage to property, threatening lives, affecting the energy and transportation sectors, etc.). There are gaps in our understanding of the Mediterranean water cycle and its dynamics that include the variability of the Mediterranean Sea water budget and its feedback on the variability of the continental precipitation through air–sea interactions, the impact of precipitation variability on aquifer recharge, river discharge, and soil water content and vegetation characteristics specific to the Mediterranean basin and the mechanisms that control the location and intensity of heavy precipitating systems that often produce floods. The Hydrological Cycle in Mediterranean Experiment (HyMeX) program is a 10-yr concerted experimental effort at the international level that aims to advance the scientific knowledge of the water cycle variability in all compartments (land, sea, and atmosphere) and at various time and spatial scales. It also aims to improve the processes-based models needed for forecasting hydrometeorological extremes and the models of the regional climate system for predicting regional climate variability and evolution. Finally, it aims to assess the social and economic vulnerability to hydrometeorological natural hazards in the Mediterranean and the adaptation capacity of the territories and populations therein to provide support to policy makers to cope with water-related problems under the influence of climate change, by linking scientific outcomes with related policy requirements.

Pedotransfer functions in Earth system science: challenges and perspectives

Abstract: Soil, through its various functions, plays a vital role in the Earth's ecosystems and provides multiple ecosystem services to humanity. Pedotransfer functions (PTFs) are simple to complex knowledge rules that relate available soil information to soil properties and variables that are needed to parameterize soil processes. In this paper, we review the existing PTFs and document the new generation of PTFs developed in the different disciplines of Earth system science. To meet the methodological challenges for a successful application in Earth system modeling, we emphasize that PTF development has to go hand in hand with suitable extrapolation and upscaling techniques such that the PTFs correctly represent the spatial heterogeneity of soils. PTFs should encompass the variability of the estimated soil property or process, in such a way that the estimation of parameters allows for validation and can also confidently provide for extrapolation and upscaling purposes capturing the spatial variation in soils. Most actively pursued recent developments are related to parameterizations of solute transport, heat exchange, soil respiration and organic carbon content, root density and vegetation water uptake. Further challenges are to be addressed in parameterization of soil erosivity and land use change impacts at multiple scales. We argue that a comprehensive set of PTFs can be applied throughout a wide range of disciplines of Earth system science, with emphasis on land surface models. Novel sensing techniques provide a true breakthrough for this, yet further improvements are necessary for methods to deal with uncertainty and to validate applications at global scale.