Author
Spyridon Pavlidis
Other affiliations: Georgia Institute of Technology
Bio: Spyridon Pavlidis is an academic researcher from North Carolina State University. The author has contributed to research in topics: Materials science & Gallium nitride. The author has an hindex of 8, co-authored 34 publications receiving 323 citations. Previous affiliations of Spyridon Pavlidis include Georgia Institute of Technology.
Topics: Materials science, Gallium nitride, Optoelectronics, Physics, Amplifier
Papers
More filters
••
TL;DR: In this paper, an advanced liquid metal thin-line patterning process based on soft lithography and a compatible vertical integration technique is presented that enable size-scalable and high-density EGaIn-based, soft microelectronic components and circuits.
Abstract: The use of conducting liquids with high electrical conductivity, such as eutectic gallium–indium (EGaIn), has great potential in electronics applications requiring stretchability and deformability beyond conventional flexible electronics relying on solid conductors. An advanced liquid metal thin-line patterning process based on soft lithography and a compatible vertical integration technique are presented that enable size-scalable and high-density EGaIn-based, soft microelectronic components and circuits. The advanced liquid metal thin-line patterning process based on poly(dimethylsiloxane) (PDMS) substrates and soft lithography techniques allows for simultaneous patterning of uniform and residue-free EGaIn lines with line width from single micrometers to several millimeters at room temperature and under ambient pressure. Using this fabrication technique, passive electronic components and circuits are investigated under elastic deformations using numerical and experimental approaches. In addition, soft through-PDMS vias with high aspect ratio are demonstrated for multilayer interconnections in 2.5D and 3D integration approaches. To highlight the system-level potential of the patterning technique, a chemical sensor based on an integrated LC resonance circuit with a microfluidic-tunable interdigitated capacitor and a planar spiral inductor is fabricated and characterized. Finally, to show the flexibility and stretchability of the resulting electronics, circuits with embedded light emitting diodes (LEDs) are investigated under bending, twisting, and stretching deformations.
102 citations
••
18 Dec 2014TL;DR: Aerosol jet printed 3D coplanar waveguides up to 50 GHz are demonstrated in this paper for the first time featuring a multilayer aerosol jet deposition process.
Abstract: Aerosol jet printed 3-D coplanar waveguides up to 50 GHz are demonstrated in this paper for the first time featuring a multilayer aerosol jet deposition process. The aerosol jet printing utilized in this paper is the first aerosol jet process to demonstrate multilayer deposition with bi-materials and is host substrate independent. The paper provides an insight into the fabrication process, the technology assessment and the characterization of the polyimide as well as the nano silver particles. The printed polyimide could achieve a thickness of 60 μm. The three-dimensional printed transmission lines demonstrated losses of 0.5 dB/mm at 50 GHz. Keywords— 3-D printing, aerosol jet printing, conducting ink, coplanar waveguide, multilayers, RF, silver nano-particle.
59 citations
••
01 Jun 2014
TL;DR: In this paper, the authors describe the fabrication process, the technology assessment and the characterization of coplanar waveguides (CPW) lines and CPW to microstrip transitions on liquid crystal polymer (LCP) in the D band using silver nanoparticle aerosol jet printing process.
Abstract: In this paper, aerosol jet printing technology is assessed for D-band RF applications for the first time. It describes the fabrication process, the technology assessment and the characterization of coplanar waveguides (CPW) lines and CPW to microstrip transitions on liquid crystal polymer (LCP) in the D band using silver nanoparticle aerosol jet printing process. Feature sizes with a resolution of 10 μm, which is the finest resolution among all of the digital printing technologies, were realized successfully. The conductivity of the sintered silver structures was half to that of bulk silver after sintering at temperatures up to 200 °C. Printed transmission lines demonstrated losses of 0.35 dB/mm at 110 GHz and 0.51 dB/mm at 170 GHz that are less than that of the insertion loss of the inkjet printing lines by an order of magnitude.
47 citations
••
TL;DR: In this article, gate resistance thermometry (GRT) was used to determine the channel temperature of AlGaN/GaN high electron-mobility transistors under various bias conditions.
Abstract: In this paper, gate resistance thermometry (GRT) was used to determine the channel temperature of AlGaN/GaN high electron-mobility transistors. Raman thermometry has been used to verify GRT by comparing the channel temperatures measured by both techniques under various bias conditions. To further validate this technique, a thermal finite-element model has been developed to model the heat dissipation throughout the devices. Comparisons show that the GRT method averages the temperature over the gate width, yielding a slightly lower peak temperature than Raman thermography. Overall, this method provides a fast and simple technique to determine the average temperature under both steady-state and pulsed bias conditions.
40 citations
••
TL;DR: In this article, a large area (25 000 μm2) Al-rich AlGaN-based avalanche photodiodes (APDs) grown on single crystal AlN substrates operating with differential (the difference in photocurrent and dark current) signal gain of 100
Abstract: We demonstrate large area (25 000 μm2) Al-rich AlGaN-based avalanche photodiodes (APDs) grown on single crystal AlN substrates operating with differential (the difference in photocurrent and dark current) signal gain of 100 000 at 90 pW ( 280 nm, establishing solar blindness of the device.
25 citations
Cited by
More filters
•
TL;DR: In this article, the effects of switching transients in digital MOS circuits that perturb analog circuits integrated on the same die by means of coupling through the substrate were observed. And the authors showed that in such cases the substrate noise is highly dependent on layout geometry.
Abstract: An experimental technique is described for observing the effects of switching transients in digital MOS circuits that perturb analog circuits integrated on the same die by means of coupling through the substrate Various approaches to reducing substrate crosstalk (the use of physical separation of analog and digital circuits, guard rings, and a low-inductance substrate bias) are evaluated experimentally for a CMOS technology with a substrate comprising an epitaxial layer grown on a heavily doped bulk wafer Observations indicate that reducing the inductance in the substrate bias is the most effective Device simulations are used to show how crosstalk propagates via the heavily doped bulk and to predict the nature of substrate crosstalk in CMOS technologies integrated in uniform, lightly doped bulk substrates, showing that in such cases the substrate noise is highly dependent on layout geometry A method of including substrate effects in SPICE simulations for circuits fabricated on epitaxial, heavily doped substrates is developed >
567 citations
••
TL;DR: A discussion of the strategies in materials innovation and structural design to build soft electronic devices and systems is provided and perspectives on the key challenges and future directions of this field are presented.
Abstract: Soft electronics are intensively studied as the integration of electronics with dynamic nonplanar surfaces has become necessary. Here, a discussion of the strategies in materials innovation and structural design to build soft electronic devices and systems is provided. For each strategy, the presentation focuses on the fundamental materials science and mechanics, and example device applications are highlighted where possible. Finally, perspectives on the key challenges and future directions of this field are presented.
417 citations
••
TL;DR: An overview of the underlying principles of AJP are summarized, applications of the technology are reviewed, and where gains may be realised are hypothesised through this assistive manufacturing process.
Abstract: Aerosol Jet Printing (AJP) is an emerging contactless direct write approach aimed at the production of fine features on a wide range of substrates. Originally developed for the manufacture of electronic circuitry, the technology has been explored for a range of applications, including, active and passive electronic components, actuators, sensors, as well as a variety of selective chemical and biological responses. Freeform deposition, coupled with a relatively large stand-off distance, is enabling researchers to produce devices with increased geometric complexity compared to conventional manufacturing or more commonly used direct write approaches. Wide material compatibility, high resolution and independence of orientation have provided novelty in a number of applications when AJP is conducted as a digitally driven approach for integrated manufacture. This overview of the technology will summarise the underlying principles of AJP, review applications of the technology and discuss the hurdles to more widespread industry adoption. Finally, this paper will hypothesise where gains may be realised through this assistive manufacturing process.
219 citations
••
TL;DR: Various factors affecting cell adhesion are reviewed as well as the methods and materials often used in investigating cellAdhesion, essential for materials and life sciences, such as advanced biomedical engineering and tissue engineering.
Abstract: Abstract Cell adhesion is a basic requirement for anchorage-dependent cells to survive on the matrix. It is the first step in a series of cell activities, such as cell diffusion, migration, proliferation, and differentiation. In vivo, cells are surrounded by extracellular matrix (ECM), whose physical and biochemical properties and micromorphology may affect and regulate the function and behavior of cells, causing cell reactions. Cell adhesion is also the basis of communication between cells and the external environment and plays an important role in tissue development. Therefore, the significance of studying cell adhesion in vitro has become increasingly prominent. For instance, in the field of tissue engineering and regenerative medicine, researchers have used artificial surfaces of different materials to simulate the properties of natural ECM, aiming to regulate the behavior of cell adhesion. Understanding the factors that affect cell behavior and how to control cell behavior, including cell adhesion, orientation, migration, and differentiation on artificial surfaces, is essential for materials and life sciences, such as advanced biomedical engineering and tissue engineering. This article reviews various factors affecting cell adhesion as well as the methods and materials often used in investigating cell adhesion.
197 citations
••
TL;DR: An unconventional approach for high-resolution, reconfigurable 3D printing using liquid metals for stretchable, 3D integrations in electronics, which generates a thin oxide interface that can be effective in preventing the spontaneous penetration of gallium atoms into different metal layers while preserving electrical properties under ambient conditions.
Abstract: We report an unconventional approach for high-resolution, reconfigurable 3D printing using liquid metals for stretchable, 3D integrations. A minimum line width of 1.9 μm can be reliably formed using direct printing, and printed patterns can be reconfigured into diverse 3D structures with maintaining pristine resolutions. This reconfiguration can be performed multiple times, and it also generates a thin oxide interface that can be effective in preventing the spontaneous penetration of gallium atoms into different metal layers while preserving electrical properties under ambient conditions. Moreover, these free-standing features can be encapsulated with stretchable, conformal passivations. We demonstrate applications in the form of a reconfigurable antenna, which is tunable by changing geometeries, and reversibly movable interconnections used as mechanical switches. The free-standing 3D structure of electrodes is also advantageous for minimizing the number and space between interconnections, which is important for achieving higher integrations, as demonstrated in an array of microLEDs.
175 citations