Stephane Evoy

Bio: Stephane Evoy is an academic researcher from University of Alberta. The author has contributed to research in topics: Bacteriophage & Luminescence. The author has an hindex of 36, co-authored 110 publications receiving 4932 citations. Previous affiliations of Stephane Evoy include Cornell University & University of Pennsylvania.

A review of piezoelectric polymers as functional materials for electromechanical transducers

Abstract: Polymer based MEMS and microfluidic devices have the advantages of mechanical flexibility, lower fabrication cost and faster processing over silicon based ones. Also, many polymer materials are considered biocompatible and can be used in biological applications. A valuable class of polymers for microfabricated devices is piezoelectric functional polymers. In addition to the normal advantages of polymers, piezoelectric polymers can be directly used as an active material in different transduction applications. This paper gives an overview of piezoelectric polymers based on their operating principle. This includes three main categories: bulk piezoelectric polymers, piezocomposites and voided charged polymers. State-of-the-art piezopolymers of each category are presented with a focus on fabrication techniques and material properties. A comparison between the different piezoelectric polymers and common inorganic piezoelectric materials (PZT, ZnO, AlN and PMN?PT) is also provided in terms of piezoelectric properties. The use of piezopolymers in different electromechanical devices is also presented. This includes tactile sensors, energy harvesters, acoustic transducers and inertial sensors.

Measurement of mechanical resonance and losses in nanometer scale silicon wires

Abstract: We present data on nanofabricated suspended silicon wires driven at resonance. The wires are electrostatically driven and detected optically. We have observed wires with widths as small as 45 nm and resonant frequencies as high as 380 MHz. We see a strong dependence of the resonant quality factor on the surface to volume ratio.

Recent advances in bacteriophage based biosensors for food-borne pathogen detection.

Abstract: Foodborne diseases are a major health concern that can have severe impact on society and can add tremendous financial burden to our health care systems. Rapid early detection of food contamination is therefore relevant for the containment of food-borne pathogens. Conventional pathogen detection methods, such as microbiological and biochemical identification are time-consuming and laborious, while immunological or nucleic acid-based techniques require extensive sample preparation and are not amenable to miniaturization for on-site detection. Biosensors have shown tremendous promise to overcome these limitations and are being aggressively studied to provide rapid, reliable and sensitive detection platforms for such applications. Novel biological recognition elements are studied to improve the selectivity and facilitate integration on the transduction platform for sensitive detection. Bacteriophages are one such unique biological entity that show excellent host selectivity and have been actively used as recognition probes for pathogen detection. This review summarizes the extensive literature search on the application of bacteriophages (and recently their receptor binding proteins) as probes for sensitive and selective detection of foodborne pathogens, and critically outlines their advantages and disadvantages over other recognition elements.

Introduction to Nanoscale Science and Technology

Abstract: Preface Introduction I: Nanoscale Fabrication and Characterization 1 Nanolithography LR Harriott, R Hull 2 Self-Assembly And Self-Organization R Shenhar, TB Norsten, VM Rotello 3 Scanning Probe Microscopes K-W Ng II: Nanomaterials and Nanostructures 4 The Geometry of Nanoscale Carbon V Crespi 5 Fullerenes H Dorn, JC Duchamp 6 Carbon Nanotubes BW Smith, DE Luzzi 7 Quantum Dots AB Denison, LJ Hope-Weeks, RW Meulenberg, LJ Terminello 8 Nanocomposites RC Cammarata III: Nanoscale and Molecular Electronics 9 Advances In Microelectronics - From Microscale To Nanoscale Devices J Van Der Spiegel 10 Molecular Electronics M Zwolak, M Di Ventra 11 Single Electron Transistors JG Lu IV: Nanotechnology in Magnetic Systems 12 Semiconductor Nanostructures For Quantum Computation ME Flatte 13 Magnetoresistive Materials And Devices O Heinonen 14 Nanotechnology In Magnetic Storage JA Katine, RE Fontana Jr V: Nanotechnology in Integrative Systems 15 Introduction To Integrative Systems M Gaitan 16 Nanoelectromechanical Systems S Evoy, M Duemling, T Jaruhar 17 Micromechanical Sensors P Datskos, NV Lavrik VI: Nanoscale Optoelectronics 18 Quantum-Confined Optoelectronic Systems S Fafard 19 Organic Optoelectronic Nanostructures JR Heflin20 Photonic Crystals Y Xia, K Kamata, Y Lu VII: Nanobiotechnology 21 Biomemetic Nanostructures DE Dische 22 Biomolecular Motors J Schmidt, C Montemagno 23 Nanofluidics J Han

Diameter-dependent electromechanical properties of GaN nanowires.

Abstract: The diameter-dependent Young's modulus, E, and quality factor, Q, of GaN nanowires were measured using electromechanical resonance analysis in a transmission electron microscope. E is close to the theoretical bulk value (∼300 GPa) for a large diameter nanowire (d = 84 nm) but is significantly smaller for smaller diameters. At room temperature, Q is as high as 2800 for d = 84 nm, significantly greater than what is obtained from micromachined Si resonators of comparable surface-to-volume ratio. This implies significant advantages of smooth-surfaced GaN nanowire resonators for nanoelectromechanical system (NEMS) applications. Two closely spaced resonances are observed and attributed to the low-symmetry triangular cross section of the nanowires.

疟原虫var基因转换速率变化导致抗原变异[英]／Paul H, Robert P, Christodoulou Z, et al//Proc Natl Acad Sci U S A

Abstract: 抗原变异可使得多种致病微生物易于逃避宿主免疫应答。表达在感染红细胞表面的恶性疟原虫红细胞表面蛋白1（PfPMP1）与感染红细胞、内皮细胞、树突状细胞以及胎盘的单个或多个受体作用，在黏附及免疫逃避中起关键的作用。每个单倍体基因组var基因家族编码约60种成员，通过启动转录不同的var基因变异体为抗原变异提供了分子基础。

Transport phenomena in nanofluidics

Abstract: This thesis explores transport phenomena in nanochannels on a chip. Fundamental nanofluidic ionic studies form the basis for novel separation and preconcentration applications for proteomic purposes. The measurements were performed with 50-nm-high 1D nanochannels, which are easily accessible from both sides by two microchannels. Nanometer characteristic apertures were manufactured in the bonded structure of Pyrex-amorphous silicon – Pyrex, in which the thickness of the amorphous silicon layer serves as a spacer to define the height of the nanochannels. The geometry of the nanometer-sized apertures is well defined, which simplifies the modeling of the transport across them. Compared to biological pores, the present nanochannels in Pyrex offer increased stability. Fundamental characteristics of nanometer-sized apertures were obtained by impedance spectroscopy measurements of the nanochannel at different ionic strengths and pH values. A conductance plateau (on a log-log scale) was modeled and measured, establishing due to the dominance of the surface charge density in the nanochannels, which induces an excess of mobile counterions to maintain electroneutrality. The nanochannel conductance can be regulated at low ionic strengths by pH adjustment, and by an external voltage applied on the chip to change the zeta potential. This field-effect allows the regulation of ionic flow which can be exploited for the fabrication of nanofluidic devices. Fluorescence measurements confirm that 50-nm-high nanochannels show an exclusion of co-ions and an enrichment of counterions at low ionic strengths. This permselectivity is related to the increasing thickness of the electrical double layer (EDL) with decreasing salt concentrations, which results in an EDL overlap in an aperture if the height of the nanochannel and the thickness of the EDL are comparable in size. The diffusive transport of charged species and therefore the exclusion-enrichment effect was described with a simple model based on the Poisson-Boltzmann equation. The negatively charged Pyrex surface of the nanometer characteristic apertures can be inversed with chemical surface pretreatments, resulting in an exclusion of cations and an enrichment of anions. When a pressure gradient is applied across the nanochannels, charged molecules are electrostatically rejected at the entrance of the nanometer-sized apertures, which can be used for separation processes. Proteomic applications are presented such as the separation and preconcentration of proteins. The diffusion of Lectin proteins with different isoelectric points and very similar compositions were controlled by regulating the pH value of the buffer. When the proteins are neutral at their pI value, the diffusion coefficient is maximal because the biomolecules does not interact electrostatically with the charged surfaces of the nanochannel. This led to a fast separation of three Lectin proteins across the nanochannel. The pI values measured in this experiment are slightly shifted compared to the values obtained with isoelectric focusing because of reversible adsorption of proteins on the walls which affects the pH value in the nanochannel. An important application in the proteomic field is the preconcentration of biomolecules. By applying an electric field across the nanochannel, anionic and cationic analytes were preconcentrated on the cathodic side of the nanometer-sized aperture whereas on the anodic side depletion of ions was observed. This is due to concentration polarization, a complex of effects related to the formation of ionic concentration gradients in the electrolyte solution adjacent to an ion-selective interface. It was measured that the preconcentration factor increased with the net charge of the molecule, leading to a preconcentration factor of > 600 for rGFP proteins in 9 minutes. Such preconcentrations are important in micro total analysis systems to achieve increased detection signals of analytes contained in dilute solutions. Compared to cylindrical pores, our fabrication process allows the realization of nanochannels on a chip in which the exclusion-enrichment effect and a big flux across the nanometer-sized aperture can be achieved, showing the interest for possible micro total analysis system applications. The described exclusion-enrichment effect as well as concentration polarization play an important role in transport phenomena in nanofluidics. The appendix includes preliminary investigations in DNA molecule separation and fluorescence correlation spectroscopy measurements, which allows investigating the behavior of molecules in the nanochannel itself.

Silicon-based Nanomaterials for Lithium-Ion Batteries - A Review

Abstract: There are growing concerns over the environmental, climate, and health impacts caused by using non-renewable fossil fuels. The utilization of green energy, including solar and wind power, is believed to be one of the most promising alternatives to support more sustainable economic growth. In this regard, lithium-ion batteries (LIBs) can play a critically important role. To further increase the energy and power densities of LIBs, silicon anodes have been intensively explored due to their high capacity, low operation potential, environmental friendliness, and high abundance. The main challenges for the practical implementation of silicon anodes, however, are the huge volume variation during lithiation and delithiation processes and the unstable solid-electrolyte interphase (SEI) films. Recently, significant breakthroughs have been achieved utilizing advanced nanotechnologies in terms of increasing cycle life and enhancing charging rate performance due partially to the excellent mechanical properties of nanomaterials, high surface area, and fast lithium and electron transportation. Here, the most recent advance in the applications of 0D (nanoparticles), 1D (nanowires and nanotubes), and 2D (thin film) silicon nanomaterials in LIBs are summarized. The synthetic routes and electrochemical performance of these Si nanomaterials, and the underlying reaction mechanisms are systematically described.

Label-free immunodetection with CMOS-compatible semiconducting nanowires

Abstract: Semiconducting nanowires have the potential to act as highly sensitive sensors for the detection of pathogenic microorganisms, without the need for a label on the pathogen. Practical miniature sensors would have applications in diagnostics, homeland security and basic research. Current technologies have not been widely adopted for various reasons, including the difficulty of integrating nanoscale devices into practical sensors. Now a team spanning five departments at Yale has developed a new approach to the problem. In a state-of-the-art (CMOS-compatible) system they create miniature, ultra-sensitive sensors that can detect specific unlabelled antibodies at concentrations below 100 femtomolar and are able to monitor the cellular immune response in 'real-time'. A new approach that uses complementary metal oxide semiconductor field effect transistor compatible technology is reported, and demonstrates the specific label-free detection of below 100 femtomolar concentrations of antibodies as well as real-time monitoring of the cellular immune response. Semiconducting nanowires have the potential to function as highly sensitive and selective sensors for the label-free detection of low concentrations of pathogenic microorganisms1,2,3,4,5,6,7,8,9,10. Successful solution-phase nanowire sensing has been demonstrated for ions3, small molecules4, proteins5,6, DNA7 and viruses8; however, ‘bottom-up’ nanowires (or similarly configured carbon nanotubes11) used for these demonstrations require hybrid fabrication schemes12,13, which result in severe integration issues that have hindered widespread application. Alternative ‘top-down’ fabrication methods of nanowire-like devices9,10,14,15,16,17 produce disappointing performance because of process-induced material and device degradation. Here we report an approach that uses complementary metal oxide semiconductor (CMOS) field effect transistor compatible technology and hence demonstrate the specific label-free detection of below 100 femtomolar concentrations of antibodies as well as real-time monitoring of the cellular immune response. This approach eliminates the need for hybrid methods and enables system-scale integration of these sensors with signal processing and information systems. Additionally, the ability to monitor antibody binding and sense the cellular immune response in real time with readily available technology should facilitate widespread diagnostic applications.

Cantilever transducers as a platform for chemical and biological sensors

Abstract: Since the late 1980s there have been spectacular developments in micromechanical or microelectro-mechanical (MEMS) systems which have enabled the exploration of transduction modes that involve mechanical energy and are based primarily on mechanical phenomena. As a result an innovative family of chemical and biological sensors has emerged. In this article, we discuss sensors with transducers in a form of cantilevers. While MEMS represents a diverse family of designs, devices with simple cantilever configurations are especially attractive as transducers for chemical and biological sensors. The review deals with four important aspects of cantilever transducers: (i) operation principles and models; (ii) microfabrication; (iii) figures of merit; and (iv) applications of cantilever sensors. We also provide a brief analysis of historical predecessors of the modern cantilever sensors.