Stephen J. Pearton

Bio: Stephen J. Pearton is an academic researcher from University of Florida. The author has contributed to research in topics: Dry etching & Etching (microfabrication). The author has an hindex of 104, co-authored 1913 publications receiving 58669 citations. Previous affiliations of Stephen J. Pearton include Kyungpook National University & University of Southern California.

Topics in Growth and Device Processing of III-V Semiconductors

Abstract: MOMBE epitaxial growth growth of HBT structures heteroepitaxy implant doping and isolation rapid thermal annealing wet and dry etching hydrogen in III-V's HBT processing and devices novel FET structures.

Movement of basal plane dislocations in GaN during electron beam irradiation

Abstract: The movement of basal plane segments of dislocations in low-dislocation-density GaN films grown by epitaxial lateral overgrowth as a result of irradiation with the probing beam of a scanning electron microscope was detected by means of electron beam induced current. Only a small fraction of the basal plane dislocations was susceptible to such changes and the movement was limited to relatively short distances. The effect is explained by the radiation enhanced dislocation glide for dislocations pinned by two different types of pinning sites: a low-activation-energy site and a high-activation-energy site. Only dislocation segments pinned by the former sites can be moved by irradiation and only until they meet the latter pinning sites.

10 MeV electrons irradiation effects in variously doped n-GaN

Abstract: We studied 10 MeV electron irradiation effects in a group of n-GaN films grown by standard metalorganic chemical vapor deposition (MOCVD) and by epitaxial lateral overgrowth (ELOG) techniques. The samples were either undoped or Si-doped, so that the shallow donor concentrations ranged from 1014 cm−3 to 3 × 1018 cm−3. It was found that electron irradiation led to the compensation of n-type conductivity and that the carrier removal rate substantially increased with an increase in the starting donor concentration. For the MOCVD samples, it was observed that the main compensating defect introduced by electrons was a 0.15 eV electron trap detected by admittance spectroscopy. Once the Fermi level crossed the level of these traps two other centers with activation energies of 0.2 and 1 eV were found to contribute to the compensation, so that after high doses, the Fermi level in moderately doped samples was pinned near Ec −1 eV. In ELOG samples the 0.15 eV electron traps were not detected. Instead only the 0.2 and...

Properties of Mn- and Co-doped bulk ZnO crystals

Abstract: Electrical and magnetic properties, room temperature optical absorption bands, and 300 and 90K microcathodo luminescence (MCL) bands were studied in heavily Mn and Co doped (1–5at.%) bulk ZnO crystals. Optical absorption bands near 1.9eV (Co) and 2eV (Mn) and MCL bands near 1.84eV (Co) and 1.89eV (Mn) are found to be associated with transition metal (TM) ions. These bands are assigned to internal transitions between the levels of the substitutional TM ions. The temperature dependence of the resistivity of the ZnO showed activation energies of ∼35meV in all cases and the electron mobilities were decreased relative to the undoped material.

Mg doping of InP and InGaAs grown by metalorganic molecular beam epitaxy using bis‐cyclopentadienyl magnesium

Abstract: We have investigated the feasibility of Mg doping using bis‐cyclopentadienyl magnesium (Cp2Mg) during growth of InP and InGaAs by metalorganic molecular beam epitaxy. In InP, hole concentrations between 5×1016 and 4×1018 cm−3 were readily attained without degradation of the surface morphology. Comparison with secondary ion mass spectrometry analysis shows good electrical activation for concentrations ≤2×1018 cm−3 though compensation at low doping levels was observed due to compensation from carbon and oxygen impurities which were present at levels of 9×1016 and 5×1016 cm−3, respectively. Mg profiles in InGaAs tended to be more abrupt than those in InP and hole concentrations up to 1019 cm−3 were achieved. p‐InGaAs/n‐InP structures annealed at 600 °C for 10 s showed no evidence of Mg diffusion.

A comprehensive review of zno materials and devices

Abstract: The semiconductor ZnO has gained substantial interest in the research community in part because of its large exciton binding energy (60meV) which could lead to lasing action based on exciton recombination even above room temperature. Even though research focusing on ZnO goes back many decades, the renewed interest is fueled by availability of high-quality substrates and reports of p-type conduction and ferromagnetic behavior when doped with transitions metals, both of which remain controversial. It is this renewed interest in ZnO which forms the basis of this review. As mentioned already, ZnO is not new to the semiconductor field, with studies of its lattice parameter dating back to 1935 by Bunn [Proc. Phys. Soc. London 47, 836 (1935)], studies of its vibrational properties with Raman scattering in 1966 by Damen et al. [Phys. Rev. 142, 570 (1966)], detailed optical studies in 1954 by Mollwo [Z. Angew. Phys. 6, 257 (1954)], and its growth by chemical-vapor transport in 1970 by Galli and Coker [Appl. Phys. ...

Spintronics: Fundamentals and applications

Abstract: Spintronics, or spin electronics, involves the study of active control and manipulation of spin degrees of freedom in solid-state systems. This article reviews the current status of this subject, including both recent advances and well-established results. The primary focus is on the basic physical principles underlying the generation of carrier spin polarization, spin dynamics, and spin-polarized transport in semiconductors and metals. Spin transport differs from charge transport in that spin is a nonconserved quantity in solids due to spin-orbit and hyperfine coupling. The authors discuss in detail spin decoherence mechanisms in metals and semiconductors. Various theories of spin injection and spin-polarized transport are applied to hybrid structures relevant to spin-based devices and fundamental studies of materials properties. Experimental work is reviewed with the emphasis on projected applications, in which external electric and magnetic fields and illumination by light will be used to control spin and charge dynamics to create new functionalities not feasible or ineffective with conventional electronics.

Graphene-based composites

Abstract: Graphene has attracted tremendous research interest in recent years, owing to its exceptional properties. The scaled-up and reliable production of graphene derivatives, such as graphene oxide (GO) and reduced graphene oxide (rGO), offers a wide range of possibilities to synthesize graphene-based functional materials for various applications. This critical review presents and discusses the current development of graphene-based composites. After introduction of the synthesis methods for graphene and its derivatives as well as their properties, we focus on the description of various methods to synthesize graphene-based composites, especially those with functional polymers and inorganic nanostructures. Particular emphasis is placed on strategies for the optimization of composite properties. Lastly, the advantages of graphene-based composites in applications such as the Li-ion batteries, supercapacitors, fuel cells, photovoltaic devices, photocatalysis, as well as Raman enhancement are described (279 references).

Fundamentals of zinc oxide as a semiconductor

Abstract: In the past ten years we have witnessed a revival of, and subsequent rapid expansion in, the research on zinc oxide (ZnO) as a semiconductor. Being initially considered as a substrate for GaN and related alloys, the availability of high-quality large bulk single crystals, the strong luminescence demonstrated in optically pumped lasers and the prospects of gaining control over its electrical conductivity have led a large number of groups to turn their research for electronic and photonic devices to ZnO in its own right. The high electron mobility, high thermal conductivity, wide and direct band gap and large exciton binding energy make ZnO suitable for a wide range of devices, including transparent thin-film transistors, photodetectors, light-emitting diodes and laser diodes that operate in the blue and ultraviolet region of the spectrum. In spite of the recent rapid developments, controlling the electrical conductivity of ZnO has remained a major challenge. While a number of research groups have reported achieving p-type ZnO, there are still problems concerning the reproducibility of the results and the stability of the p-type conductivity. Even the cause of the commonly observed unintentional n-type conductivity in as-grown ZnO is still under debate. One approach to address these issues consists of growing high-quality single crystalline bulk and thin films in which the concentrations of impurities and intrinsic defects are controlled. In this review we discuss the status of ZnO as a semiconductor. We first discuss the growth of bulk and epitaxial films, growth conditions and their influence on the incorporation of native defects and impurities. We then present the theory of doping and native defects in ZnO based on density-functional calculations, discussing the stability and electronic structure of native point defects and impurities and their influence on the electrical conductivity and optical properties of ZnO. We pay special attention to the possible causes of the unintentional n-type conductivity, emphasize the role of impurities, critically review the current status of p-type doping and address possible routes to controlling the electrical conductivity in ZnO. Finally, we discuss band-gap engineering using MgZnO and CdZnO alloys.