Stephen J. Pearton

Bio: Stephen J. Pearton is an academic researcher from University of Florida. The author has contributed to research in topics: Dry etching & Etching (microfabrication). The author has an hindex of 104, co-authored 1913 publications receiving 58669 citations. Previous affiliations of Stephen J. Pearton include Kyungpook National University & University of Southern California.

Sputtered AlN encapsulant for high‐temperature annealing of GaN

Abstract: Reactively sputtered AlN is shown by electrical characterization of Pt/Au Schottky diodes to be an effect encapsulant for GaN annealed at 1100 °C. Schottky diodes formed on GaN encapsulated with AlN during the anneal had low reverse leakage currents with breakdown voltages in excess of 40 V. In contrast, samples annealed without the AlN layer had 3–4 orders‐of‐magnitude higher reverse leakage currents. Atomic force microscopy images of as‐grown and annealed samples also demonstrate an increase in surface roughness and a change in morphology of the uncapped samples following annealing. Auger electron spectroscopy supports the hypothesis that the AlN encapsulant is reducing N loss from the GaN substrate. N loss in the uncapped samples is expected to create an n+‐region at the surface that accounts for the high reverse leakage current and improved Ohmic behavior for the uncapped samples. The use of AlN encapsulation will enable the realization of all ion implanted GaN metal semiconductor field effect transis...

Wide Bandgap Semiconductor One-Dimensional Nanostructures for Applications in Nanoelectronics and Nanosensors:

Abstract: Wide bandgap semiconductor ZnO, GaN and InN nanowires have displayed the ability to detect many types of gases and biological and chemical species of interest. In this review, we give some recent e...

Effect of external strain on the conductivity of AlGaN/GaN high-electron-mobility transistors

Abstract: The changes in the conductance of the channel of Al0.3Ga0.7N/GaN high-electron-mobility transistor structures during the application of both tensile and compressive strain were measured. For a fixed Al mole fraction, the changes in the conductance were roughly linear over the range up to 2.7×108 N cm−2, with coefficients for planar devices of −6.0+/−2.5×10−10 S N−1 m−2 for tensile strain and +9.5+/−3.5×10−10 S N−1 m−2 for compressive strain. For mesa-isolated structures, the coefficients were smaller due to the reduced effect of the AlGaN strain, with values of 5.5+/−1.1×10−13 S N−1 m−2 for tensile strain and 4.8×10−13 S N−1 m−2 for compressive strain. The large changes in the conductance demonstrate that simple AlGaN/GaN heterostructures are promising for pressure and strain sensor applications.

Phosphorus doped ZnO light emitting diodes fabricated via pulsed laser deposition

Abstract: ZnO-based light emitting diodes were fabricated on c-plane sapphire using ZnO:P∕Zn0.9Mg0.1O∕ZnO∕Zn0.9Mg0.1O∕ZnO:Ga p-i-n heterostructures. The p-i-n heterojunction diodes are rectifying and show light emission under forward bias. The electroluminescence spectra shows deep level emission at low bias, but near band edge ultraviolet emission at high voltage bias. A decrease in leakage currents in as-fabricated structures was achieved via low temperature oxygen annealing.

Characteristics of MgO/GaN gate-controlled metal–oxide– semiconductor diodes

Abstract: Gate-controlled n+p metal–oxide–semiconductor diodes were fabricated in p-GaN using MgO as a gate dielectric and Si+ implantation to create the n+ regions. This structure overcomes the low minority carrier generation rate in GaN and allowed observation of clear inversion behavior in the dark at room temperature. By contrast, diodes without the n+ regions to act as an external source of minority carriers did not show inversion even at measurement temperatures of 300 °C. The gated diodes showed the expected shape of the current–voltage characteristics, with clear regions corresponding to depletion and inversion under the gate. The MgO was deposited prior to the Si implantation and was stable during the activation annealing for the Si-implanted n+ regions.

A comprehensive review of zno materials and devices

Abstract: The semiconductor ZnO has gained substantial interest in the research community in part because of its large exciton binding energy (60meV) which could lead to lasing action based on exciton recombination even above room temperature. Even though research focusing on ZnO goes back many decades, the renewed interest is fueled by availability of high-quality substrates and reports of p-type conduction and ferromagnetic behavior when doped with transitions metals, both of which remain controversial. It is this renewed interest in ZnO which forms the basis of this review. As mentioned already, ZnO is not new to the semiconductor field, with studies of its lattice parameter dating back to 1935 by Bunn [Proc. Phys. Soc. London 47, 836 (1935)], studies of its vibrational properties with Raman scattering in 1966 by Damen et al. [Phys. Rev. 142, 570 (1966)], detailed optical studies in 1954 by Mollwo [Z. Angew. Phys. 6, 257 (1954)], and its growth by chemical-vapor transport in 1970 by Galli and Coker [Appl. Phys. ...

Spintronics: Fundamentals and applications

Abstract: Spintronics, or spin electronics, involves the study of active control and manipulation of spin degrees of freedom in solid-state systems. This article reviews the current status of this subject, including both recent advances and well-established results. The primary focus is on the basic physical principles underlying the generation of carrier spin polarization, spin dynamics, and spin-polarized transport in semiconductors and metals. Spin transport differs from charge transport in that spin is a nonconserved quantity in solids due to spin-orbit and hyperfine coupling. The authors discuss in detail spin decoherence mechanisms in metals and semiconductors. Various theories of spin injection and spin-polarized transport are applied to hybrid structures relevant to spin-based devices and fundamental studies of materials properties. Experimental work is reviewed with the emphasis on projected applications, in which external electric and magnetic fields and illumination by light will be used to control spin and charge dynamics to create new functionalities not feasible or ineffective with conventional electronics.

Graphene-based composites

Abstract: Graphene has attracted tremendous research interest in recent years, owing to its exceptional properties. The scaled-up and reliable production of graphene derivatives, such as graphene oxide (GO) and reduced graphene oxide (rGO), offers a wide range of possibilities to synthesize graphene-based functional materials for various applications. This critical review presents and discusses the current development of graphene-based composites. After introduction of the synthesis methods for graphene and its derivatives as well as their properties, we focus on the description of various methods to synthesize graphene-based composites, especially those with functional polymers and inorganic nanostructures. Particular emphasis is placed on strategies for the optimization of composite properties. Lastly, the advantages of graphene-based composites in applications such as the Li-ion batteries, supercapacitors, fuel cells, photovoltaic devices, photocatalysis, as well as Raman enhancement are described (279 references).

Fundamentals of zinc oxide as a semiconductor

Abstract: In the past ten years we have witnessed a revival of, and subsequent rapid expansion in, the research on zinc oxide (ZnO) as a semiconductor. Being initially considered as a substrate for GaN and related alloys, the availability of high-quality large bulk single crystals, the strong luminescence demonstrated in optically pumped lasers and the prospects of gaining control over its electrical conductivity have led a large number of groups to turn their research for electronic and photonic devices to ZnO in its own right. The high electron mobility, high thermal conductivity, wide and direct band gap and large exciton binding energy make ZnO suitable for a wide range of devices, including transparent thin-film transistors, photodetectors, light-emitting diodes and laser diodes that operate in the blue and ultraviolet region of the spectrum. In spite of the recent rapid developments, controlling the electrical conductivity of ZnO has remained a major challenge. While a number of research groups have reported achieving p-type ZnO, there are still problems concerning the reproducibility of the results and the stability of the p-type conductivity. Even the cause of the commonly observed unintentional n-type conductivity in as-grown ZnO is still under debate. One approach to address these issues consists of growing high-quality single crystalline bulk and thin films in which the concentrations of impurities and intrinsic defects are controlled. In this review we discuss the status of ZnO as a semiconductor. We first discuss the growth of bulk and epitaxial films, growth conditions and their influence on the incorporation of native defects and impurities. We then present the theory of doping and native defects in ZnO based on density-functional calculations, discussing the stability and electronic structure of native point defects and impurities and their influence on the electrical conductivity and optical properties of ZnO. We pay special attention to the possible causes of the unintentional n-type conductivity, emphasize the role of impurities, critically review the current status of p-type doping and address possible routes to controlling the electrical conductivity in ZnO. Finally, we discuss band-gap engineering using MgZnO and CdZnO alloys.