Steven A Vanslyke

Bio: Steven A Vanslyke is an academic researcher from Eastman Kodak Company. The author has contributed to research in topics: Electroluminescence & Cathode. The author has an hindex of 10, co-authored 15 publications receiving 17646 citations.

Organic Electroluminescent Diodes

Abstract: A novel electroluminescent device is constructed using organic materials as the emitting elements. The diode has a double‐layer structure of organic thin films, prepared by vapor deposition. Efficient injection of holes and electrons is provided from an indium‐tin‐oxide anode and an alloyed Mg:Ag cathode. Electron‐hole recombination and green electroluminescent emission are confined near the organic interface region. High external quantum efficiency (1% photon/electron), luminous efficiency (1.5 lm/W), and brightness (>1000 cd/m2) are achievable at a driving voltage below 10 V.

Electroluminescence of doped organic thin films

Abstract: Electroluminescent (EL)devices are constructed using multilayer organic thin films. The basic structure consists of a hole‐transport layer and a luminescent layer. The hole‐transport layer is an amorphous diamine film in which the only mobile carrier is the hole. The luminescent layer consists of a host material, 8‐hydroxyquinoline aluminum (Alq), which predominantly transports electrons. High radiance has been achieved at an operating voltage of less than 10 V. By doping the Alq layer with highly fluorescent molecules, the EL efficiency has been improved by about a factor of 2 in comparison with the undoped cell. Representative dopants are coumarins and DCMs. The ELquantum efficiency of the doped system is about 2.5%, photon/electron. The EL colors can be readily tuned from the blue‐green to orange‐red by a suitable choice of dopants as well as by changing the concentration of the dopant. In the doped system the electron‐hole recombination and emission zones can be confined to about 50 A near the hole‐transport interface. In the undoped Alq, the EL emission zone is considerably larger due to excitondiffusion. The multilayerdopedEL structure offers a simple means for the direct determination of excitondiffusion length.

Organic electroluminescent devices having improved power conversion efficiencies

Abstract: Electroluminescent devices are disclosed comprising a hole-injecting zone and an adjacent organic luminescent zone, the device having a power conversion efficiency of at least 9×10 -5 w/w and said zones having a combined thickness no greater than about 1 micron.

Electroluminescent device with organic electroluminescent medium

Abstract: An internal junction organic electroluminescent device (100) is disclosed comprising in sequence, an anode (102), an organic hole injecting and transporting zone (108), an organic electron injecting and transporting zone (112), and a cathode (104). The hole injecting and transporting zone (108) includes a tertiary amine containing at least two tertiary amine moieties and including attached to a tertiary amine nitrogen atom an aromatic moiety containing at least two fused aromatic rings.

Blue emitting internal junction organic electroluminescent device (ii)

Abstract: An internal junction organic electrolumines-cent device is disclosed comprised of, in sequence, an anode, an organic hole injecting and transporting zone, an organic electron injecting and transporting zone, and a cathode The organic electron injecting and transporting zone is comprised of an electron injecting layer in contact with the cathode and, interposed between the electron injecting layer and the organic hole injecting and transporting zone, a blue emitting luminescent layer comprised of an aluminum chelate containing a phenolato ligand and two Rs-8-quinolino-lato ligands, where Rs substituents are chosen to block the attachment of more than two substituted 8-quino-linolato ligands to the aluminum atom The presence of the phenolato ligand shifts device emission to the blue region of the spectrum and increases emission efficiency Device emission is shifted to even shorter blue wavelengths and increased operating stability can be realized by the incorporation of a pentacarbocyclic aromatic fluorescent dye

Light-emitting diodes based on conjugated polymers

Abstract: CONJUGATED polymers are organic semiconductors, the semiconducting behaviour being associated with the π molecular orbitals delocalized along the polymer chain. Their main advantage over non-polymeric organic semiconductors is the possibility of processing the polymer to form useful and robust structures. The response of the system to electronic excitation is nonlinear—the injection of an electron and a hole on the conjugated chain can lead to a self-localized excited state which can then decay radiatively, suggesting the possibility of using these materials in electroluminescent devices. We demonstrate here that poly(p-phenylene vinylene), prepared by way of a solution-processable precursor, can be used as the active element in a large-area light-emitting diode. The combination of good structural properties of this polymer, its ease of fabrication, and light emission in the green–yellow part of the spectrum with reasonably high efficiency, suggest that the polymer can be used for the development of large-area light-emitting displays.

Highly efficient phosphorescent emission from organic electroluminescent devices

Abstract: The efficiency of electroluminescent organic light-emitting devices1,2 can be improved by the introduction3 of a fluorescent dye. Energy transfer from the host to the dye occurs via excitons, but only the singlet spin states induce fluorescent emission; these represent a small fraction (about 25%) of the total excited-state population (the remainder are triplet states). Phosphorescent dyes, however, offer a means of achieving improved light-emission efficiencies, as emission may result from both singlet and triplet states. Here we report high-efficiency (≳90%) energy transfer from both singlet and triplet states, in a host material doped with the phosphorescent dye 2,3,7,8,12,13,17,18-octaethyl-21H,23H-porphine platinum(II) (PtOEP). Our doped electroluminescent devices generate saturated red emission with peak external and internal quantum efficiencies of 4% and 23%, respectively. The luminescent efficiencies attainable with phosphorescent dyes may lead to new applications for organic materials. Moreover, our work establishes the utility of PtOEP as a probe of triplet behaviour and energy transfer in organic solid-state systems.

Aggregation-Induced Emission: Together We Shine, United We Soar!

Abstract: Ju Mei,†,‡,∥ Nelson L. C. Leung,†,‡,∥ Ryan T. K. Kwok,†,‡ Jacky W. Y. Lam,†,‡ and Ben Zhong Tang*,†,‡,§ †HKUST-Shenzhen Research Institute, Hi-Tech Park, Nanshan, Shenzhen 518057, China ‡Department of Chemistry, HKUST Jockey Club Institute for Advanced Study, Institute of Molecular Functional Materials, Division of Biomedical Engineering, State Key Laboratory of Molecular Neuroscience, Division of Life Science, The Hong Kong University of Science and Technology, Clear Water Bay, Kowloon, Hong Kong, China Guangdong Innovative Research Team, SCUT-HKUST Joint Research Laboratory, State Key Laboratory of Luminescent Materials and Devices, South China University of Technology, Guangzhou 510640, China

Electroluminescence in conjugated polymers

Abstract: Research in the use of organic polymers as the active semiconductors in light-emitting diodes has advanced rapidly, and prototype devices now meet realistic specifications for applications. These achievements have provided insight into many aspects of the background science, from design and synthesis of materials, through materials fabrication issues, to the semiconductor physics of these polymers.

Aggregation-induced emission

Abstract: Luminogenic materials with aggregation-induced emission (AIE) attributes have attracted much interest since the debut of the AIE concept in 2001. In this critical review, recent progress in the area of AIE research is summarized. Typical examples of AIE systems are discussed, from which their structure–property relationships are derived. Through mechanistic decipherment of the photophysical processes, structural design strategies for generating new AIE luminogens are developed. Technological, especially optoelectronic and biological, applications of the AIE systems are exemplified to illustrate how the novel AIE effect can be utilized for high-tech innovations (183 references).