Sung J. Kim

Bio: Sung J. Kim is an academic researcher. The author has contributed to research in topics: Precipitation hardening & Martensite. The author has an hindex of 1, co-authored 1 publications receiving 209 citations.

Precipitation reactions and strengthening behavior in 18 wt pct nickel maraging steels

Abstract: The crystallography, structure, and composition of the strengthening precipitates in maraging steels C-250 and T-250 have been studied utilizing analytical electron microscopy and computersimulated electron diffraction patterns. The kinetics of precipitation were studied by electrical resistivity and microhardness measurements and could be described adequately by the Johnson-Mehl-Avarami equation, with precipitate nucleation occurring on dislocations and growth proceeding by a mechanism in which the dislocations serve as collector lines for solute from the matrix along which pipe diffusion occurs. The strengthening of the Co-free, higher Ti T-250 steel is caused by a refined distribution of Ni3Ti precipitates. High strength is maintained at longer times from the combined effect of a high resistance of these precipitates to coarsening and a small volume fraction of reverted austenite. In the case of the Co-containing, lower Ti C-250 steel, strengthening results from the combined presence of Ni3Ti (initially) and Fe2Mo precipitates (at longer times). Loss of strength at longer times is associated, in part, with overaging and mainly from the larger volume fraction of reverted austenite. The resistance to austenite reversion is dependent on the manner in which the relative nickel content of the martensite matrix is affected by the precipitating phases, and the difference in the reversion tendency between the two steels can be explained on this basis.

Precipitation and austenite reversion behavior of a maraging steel produced by selective laser melting

Abstract: Materials produced by selective laser melting (SLM) experience a thermal history that is markedly different from that encountered by conventionally produced materials. In particular, a very high cooling rate from the melt is combined with cyclical reheating upon deposition of subsequent layers. Using atom-probe tomography (APT), we investigated how this nonconventional thermal history influences the phase-transformation behavior of maraging steels (Fe–18Ni–9Co–3.4Mo–1.2Ti) produced by SLM. We found that despite the “intrinsic heat treatment” and the known propensity of maraging steels for rapid clustering and precipitation, the material does not show any sign of phase transformation in the as-produced state. Upon aging, three different types of precipitates, namely (Fe,Ni,Co)3(Ti,Mo), (Fe,Ni,Co)3(Mo,Ti), and (Fe,Ni,Co)7Mo6 (μ phase), were observed as well as martensite-to-austenite reversion around regions of the retained austenite. The concentration of the newly formed phases as quantified by APT closely matches thermodynamic equilibrium calculations.