SV Silvia Nedea

Bio: SV Silvia Nedea is an academic researcher from Eindhoven University of Technology. The author has contributed to research in topics: Monte Carlo method & Heat transfer. The author has an hindex of 16, co-authored 70 publications receiving 899 citations.

Molecular dynamics study of the influence of wall-gas interactions on heat flow in nanochannels.

Abstract: Especially at the nanometer scale interfaces play an important role. The effect of the wettability on the solid-liquid interface has already been studied with molecular dynamics. In this paper we study the dependence of wetting on the solid-gas interface for different density gases and investigate the influence of wetting on the heat transport properties over such an interface using molecular dynamics. Subsequently we show how the flow profile of a gas flowing along a surface also depends on this wettability. These simulations show that wettability increases the conductivity of a solid to a stationary gas and decreases the flow velocity near the interface for a gas flow. These two effects influence the cooling of a solid achieved by a cold gas flowing along its surface in opposite ways. However, we show that a higher wettability has a positive net effect on the cooling, explaining experimental results that showed an increased heat cooling effect of hydrophilic over hydrophobic microchannels.

Parameterization of a reactive force field using a Monte Carlo algorithm.

Abstract: Parameterization of a molecular dynamics force field is essential in realistically modeling the physicochemical processes involved in a molecular system. This step is often challenging when the equations involved in describing the force field are complicated as well as when the parameters are mostly empirical. ReaxFF is one such reactive force field which uses hundreds of parameters to describe the interactions between atoms. The optimization of the parameters in ReaxFF is done such that the properties predicted by ReaxFF matches with a set of quantum chemical or experimental data. Usually, the optimization of the parameters is done by an inefficient single-parameter parabolic-search algorithm. In this study, we use a robust metropolis Monte-Carlo algorithm with simulated annealing to search for the optimum parameters for the ReaxFF force field in a high-dimensional parameter space. The optimization is done against a set of quantum chemical data for MgSO4 hydrates. The optimized force field reproduced the chemical structures, the equations of state, and the water binding curves of MgSO4 hydrates. The transferability test of the ReaxFF force field shows the extend of transferability for a particular molecular system. This study points out that the ReaxFF force field is not indefinitely transferable.

Computation of accommodation coefficients and the use of velocity correlation profiles in molecular dynamics simulations

Abstract: For understanding the behavior of a gas close to a channel wall it is important to model the gas-wall interactions as detailed as possible. When using molecular dynamics simulations these interactions can be modeled explicitly, but the computations are time consuming. Replacing the explicit wall with a wall model reduces the computational time but the same characteristics should still remain. Elaborate wall models, such as the Maxwell-Yamamoto model or the Cercignani-Lampis model need a phenomenological parameter (the accommodation coefficient) for the description of the gas-wall interaction as an input. Therefore, computing these accommodation coefficients in a reliable way is very important. In this paper, two systems (platinum walls with either argon or xenon gas confined between them) are investigated and are used for comparison of the accommodation coefficients for the wall models and the explicit molecular dynamics simulations. Velocity correlations between incoming and outgoing particles colliding with the wall have been used to compare explicit simulations and wall models even further. Furthermore, based on these velocity correlations, a method to compute the accommodation coefficients is presented, and these newly computed accommodation coefficients are used to show improved correlation behavior for the wall models.

Hybrid method coupling molecular dynamics and Monte Carlo simulations to study the properties of gases in microchannels and nanochannels.

Abstract: We combine molecular dynamics (MD) and Monte Carlo (MC) simulations to study the properties of gas molecules confined between two hard walls of a microchannel or nanochannel. The coupling between MD and MC simulations is introduced by performing MD near the boundaries for accuracy and MC in the bulk because of the low computational cost. We characterize the influence of different densities and molecule sizes on the equilibrium properties of the gas in the microchannel. The effect of the particle size on the simulation results is very small in the case of a dilute gas and increases with the density. The hybrid MD-MC simulation method is validated by comparing the results for density and temperature profiles with those of pure MD and pure MC simulations. These results compare well for pure MD and pure MC, as well as hybrid MD-MC, both in the bulk and near the boundaries, when hard-sphere interactions are used. When Lennard-Jones potentials are used to accurately model the interactions between the gas and wall molecules instead, the results of pure MD simulations differ significantly from the pure MC simulations near the boundaries, but the results of the hybrid method compare well with the pure MD results near the wall, and with the pure MC and pure MD results in the middle of the channel. The hybrid method also very accurately simulates the interface between the MD and MC simulation domains. Comparisons between MD, MC, and hybrid MD-MC computational costs are outlined. The speedup when using 50% of the domain for MD simulations and 50% for MC simulations is very small compared to pure MD simulations times, but this speedup increases drastically for more realistic situations where the region near the wall is small compared to the bulk region.

Fast parallel algorithms for short-range molecular dynamics

Abstract: Three parallel algorithms for classical molecular dynamics are presented. The first assigns each processor a fixed subset of atoms; the second assigns each a fixed subset of inter-atomic forces to compute; the third assigns each a fixed spatial region. The algorithms are suitable for molecular dynamics models which can be difficult to parallelize efficiently—those with short-range forces where the neighbors of each atom change rapidly. They can be implemented on any distributed-memory parallel machine which allows for message-passing of data between independently executing processors. The algorithms are tested on a standard Lennard-Jones benchmark problem for system sizes ranging from 500 to 100,000,000 atoms on several parallel supercomputers--the nCUBE 2, Intel iPSC/860 and Paragon, and Cray T3D. Comparing the results to the fastest reported vectorized Cray Y-MP and C90 algorithm shows that the current generation of parallel machines is competitive with conventional vector supercomputers even for small problems. For large problems, the spatial algorithm achieves parallel efficiencies of 90% and a 1840-node Intel Paragon performs up to 165 faster than a single Cray C9O processor. Trade-offs between the three algorithms and guidelines for adapting them to more complex molecular dynamics simulations are also discussed.

The ReaxFF reactive force-field: development, applications and future directions

Abstract: The reactive force-field (ReaxFF) interatomic potential is a powerful computational tool for exploring, developing and optimizing material properties. Methods based on the principles of quantum mechanics (QM), while offering valuable theoretical guidance at the electronic level, are often too computationally intense for simulations that consider the full dynamic evolution of a system. Alternatively, empirical interatomic potentials that are based on classical principles require significantly fewer computational resources, which enables simulations to better describe dynamic processes over longer timeframes and on larger scales. Such methods, however, typically require a predefined connectivity between atoms, precluding simulations that involve reactive events. The ReaxFF method was developed to help bridge this gap. Approaching the gap from the classical side, ReaxFF casts the empirical interatomic potential within a bond-order formalism, thus implicitly describing chemical bonding without expensive QM calculations. This article provides an overview of the development, application, and future directions of the ReaxFF method.

Non-Equilibrium Thermodynamics

Abstract: In the preceding chapters with few exceptions we studied systems at equilibrium. This means that the systems do not change or evolve over time.

S-layers: principles and applications

Abstract: Monomolecular arrays of protein or glycoprotein subunits forming surface layers (S-layers) are one of the most commonly observed prokaryotic cell envelope components. S-layers are generally the most abundantly expressed proteins, have been observed in species of nearly every taxonomical group of walled bacteria, and represent an almost universal feature of archaeal envelopes. The isoporous lattices completely covering the cell surface provide organisms with various selection advantages including functioning as protective coats, molecular sieves and ion traps, as structures involved in surface recognition and cell adhesion, and as antifouling layers. S-layers are also identified to contribute to virulence when present as a structural component of pathogens. In Archaea, most of which possess S-layers as exclusive wall component, they are involved in determining cell shape and cell division. Studies on structure, chemistry, genetics, assembly, function, and evolutionary relationship of S-layers revealed considerable application potential in (nano)biotechnology, biomimetics, biomedicine, and synthetic biology.