Syed Anuar Faua’ad Syed Muhammad

Bio: Syed Anuar Faua’ad Syed Muhammad is an academic researcher from Universiti Teknologi Malaysia. The author has contributed to research in topics: Catalysis & Syngas. The author has an hindex of 8, co-authored 21 publications receiving 314 citations. Previous affiliations of Syed Anuar Faua’ad Syed Muhammad include University of Sydney & Dow University of Health Sciences.

Fourth generation biofuel: a review on risks and mitigation strategies

Abstract: Fourth generation biofuel (FGB) uses genetically modified (GM) algae to enhance biofuel production. Although GM algae biofuel is a well-known alternative to fossil fuels, the potential environmental and health-related risks are still of great concern. An evaluation of these concerns and accordingly devising appropriate mitigation strategies to deal with them are important to a successful commercialized production of FGB. While extensive research has been carried out on genetic modification and other technologies that aim to increase the productivity of algae strains, only a handful of them deal with the legislative limitations imposed on exploiting and processing GM algae. This paper examines this legislation and the mitigation strategies to meet potential risks associated with the exploitation and processing of FGB. Open-pond system is an economic solution for large-scale cultivation of microalgae; however, the concern regarding the health and environmental risk of cultivating GM algae and the associated stringent regulations is considered as the main barrier of FGB production. Disposal of the residue is another important issue that should be considered in FGB production. The byproducts obtained from energy extraction step and residual water from the harvesting process may contain plasmid or chromosomal DNA that may cause the risk of lateral gene transfer. Hence an appropriate mitigation practices should be used for replacement of the hazardous water residue and by-products with more environmentally friendly alternatives. The results obtained from several field testing projects for open-environment exploitation of GM algae show that under the various conditions used, there was no apparent proof to support possible horizontal gene transfer in release of GM algae.

Agro-industrial waste to biobutanol production: Eco-friendly biofuels for next generation

Abstract: Biobutanol offers several merits that make it as top-tier fuels to be discovered. Due to energy and environmental concern, traditional biobutanol production using Acetone-Butanol-Ethanol (ABE) fermentation have been revamped. An important facet for biobutanol production is selection of feedstock as a substrate. Currently, lignocellulosic biomass has attracted much interest globally due to its sustainable supply and non competitiveness with food. Cellulosic biobutanol production can be generated by using lignocellulosic residue such as agricultural crops and residue. Moreover, finding efficient pretreatment is another vital parameter in biobutanol production process. This review will briefly update the recent trends for lignocellulosic biomass as a substrate and feasible pretreatment that can be used for production of biobutanol.

Dry reforming of methane for syngas production over Ni–Co-supported Al 2 O 3 –MgO catalysts

Abstract: This research project focuses on the development of catalysts for syngas production by synthesizing Ni–Co bimetallic catalyst using aluminum oxide (Al2O3) and magnesium oxide (MgO) as the catalyst support. Ni/Al2O3 (CAT-1), Ni–Co/Al2O3 (CAT-2) and Ni–Co/Al2O3–MgO (CAT-3) nanocatalysts were synthesized by sol–gel method with citric acid as the gelling agent, and used in the dry reforming of methane (DRM). The objective of this study is to investigate the effects of Al2O3 and MgO addition on the catalytic properties and the reaction performance of synthesized catalysts in the DRM reactions. The characteristics of the catalyst are studied using field emission scanning electron microscope (FESEM), Brunauer–Emmett–Teller (BET), X-ray powder diffraction (XRD), transmission electron microscopy, H2-temperature programmed reduction, CO2-temperature programmed desorption and temperature programmed oxidation analysis. The characteristics of the catalyst are dependent on the type of support, which influences the catalytic performances. FESEM analysis showed that CAT-3 has irregular shape morphology, and is well dispersed onto the catalyst support. BET results demonstrate high surface area of the synthesized catalyst due to high calcination temperature during catalysts preparation. Moreover, the formation of MgAl2O4 spinel-type solution in CAT-3 is proved by XRD analysis due to the interaction between alumina lattice and magnesium metal which has high resistance to coke formation, leading to stronger metal surface interaction within the catalyst. The CO2 methane dry reforming is executed in the tubular furnace reactor at 1073.15 K, 1 atm and CH4/CO2 ratio of unity to investigate the effect of the mentioned catalysts. Ni–Co/Al2O3–MgO gave the highest catalyst performance compared to the other synthesized catalysts owning to the strong metal–support interaction, high stability and significant resistance to carbon deposition during the DRM reaction.

The role of pretreatment in improving the enzymatic hydrolysis

Abstract: Lignocellulosic materials are among the most promising alternative energy resources that can be utilized to produce cellulosic ethanol. However, the physical and chemical structure of lignocellulosic materials forms strong native recalcitrance and results in relatively low yield of ethanol from raw lignocellulosic materials. An appropriate pretreatment method is required to overcome this recalcitrance. For decades various pretreatment processes have been developed to improve the digestibility of lignocellulosic biomass. Each pretreatment process has a different specificity on altering the physical and chemical structure of lignocellulosic materials. In this paper, the chemical structure of lignocellulosic biomass and factors likely affect the digestibility of lignocellulosic materials are discussed, and then an overview about the most important pretreatment processes available are provided. In particular, the combined pretreatment strategies are reviewed for improving the enzymatic hydrolysis of lignocellulose and realizing the comprehensive utilization of lignocellulosic materials.