T. Christian Gasser

Bio: T. Christian Gasser is an academic researcher from Royal Institute of Technology. The author has contributed to research in topics: Abdominal aortic aneurysm & Aortic aneurysm. The author has an hindex of 31, co-authored 78 publications receiving 4331 citations. Previous affiliations of T. Christian Gasser include University of Southern Denmark.

Hyperelastic modelling of arterial layers with distributed collagen fibre orientations

Abstract: Constitutive relations are fundamental to the solution of problems in continuum mechanics, and are required in the study of, for example, mechanically dominated clinical interventions involving soft biological tissues. Structural continuum constitutive models of arterial layers integrate information about the tissue morphology and therefore allow investigation of the interrelation between structure and function in response to mechanical loading. Collagen fibres are key ingredients in the structure of arteries. In the media (the middle layer of the artery wall) they are arranged in two helically distributed families with a small pitch and very little dispersion in their orientation (i.e. they are aligned quite close to the circumferential direction). By contrast, in the adventitial and intimal layers, the orientation of the collagen fibres is dispersed, as shown by polarized light microscopy of stained arterial tissue. As a result, continuum models that do not account for the dispersion are not able to capture accurately the stress–strain response of these layers. The purpose of this paper, therefore, is to develop a structural continuum framework that is able to represent the dispersion of the collagen fibre orientation. This then allows the development of a new hyperelastic free-energy function that is particularly suited for representing the anisotropic elastic properties of adventitial and intimal layers of arterial walls, and is a generalization of the fibre-reinforced structural model introduced by Holzapfel & Gasser (Holzapfel & Gasser 2001 Comput. Meth. Appl. Mech. Eng. 190, 4379–4403) and Holzapfel et al. (Holzapfel et al. 2000 J. Elast. 61, 1–48). The model incorporates an additional scalar structure parameter that characterizes the dispersed collagen orientation. An efficient finite element implementation of the model is then presented and numerical examples show that the dispersion of the orientation of collagen fibres in the adventitia of human iliac arteries has a significant effect on their mechanical response.

Biomechanical factors in the biology of aortic wall and aortic valve diseases.

Abstract: The biomechanical factors that result from the haemodynamic load on the cardiovascular system are a common denominator of several vascular pathologies. Thickening and calcification of the aortic valve will lead to reduced opening and the development of left ventricular outflow obstruction, referred to as aortic valve stenosis. The most common pathology of the aorta is the formation of an aneurysm, morphologically defined as a progressive dilatation of a vessel segment by more than 50% of its normal diameter. The aortic valve is exposed to both haemodynamic forces and structural leaflet deformation as it opens and closes with each heartbeat to assure unidirectional flow from the left ventricle to the aorta. The arterial pressure is translated into tension-dominated mechanical wall stress in the aorta. In addition, stress and strain are related through the aortic stiffness. Furthermore, blood flow over the valvular and vascular endothelial layer induces wall shear stress. Several pathophysiological processes of aortic valve stenosis and aortic aneurysms, such as macromolecule transport, gene expression alterations, cell death pathways, calcification, inflammation, and neoangiogenesis directly depend on biomechanical factors.

Dissection properties of the human aortic media : An experimental study

Abstract: Aortic dissection occurs frequently and is clinically challenging; the underlying mechanics remain unclear. The present study investigates the dissection properties of the media of 15 human abdominal aortas (AAs) by means of direct tension tests (n=8) and peeling tests (n=12). The direct tension test demonstrates the strength of the media in the radial direction, while the peeling test allows a steady-state investigation of the dissection propagation. To explore the development of irreversible microscopic changes during medial dissection, histological images (n=8) from four AAs at different peeling stages are prepared and analyzed. Direct tension tests of coin-shaped medial specimens result in a radial failure stress of 140.1+/-15.9 kPa (mean+/-SD, n=8). Peeling tests of rectangular-shaped medial strips along the circumferential and axial directions provide peeling force/width ratios of 22.9+/-2.9 mN/mm (n=5) and 34.8+/-15.5 mN/mm (n=7); the related dissection energies per reference area are 5.1+/-0.6 mJ/cm(2) and 7.6+/-2.7 mJ/cm(2), respectively. Although student's t-tests indicate that force/width values of both experimental tests are not significantly different (alpha=0.05, p=0.125), the strikingly higher resisting force/width obtained for the axial peeling tests is perhaps indicative of anisotropic dissection properties of the human aortic media. Peeling in the axial direction of the aorta generates a remarkably "rougher" dissection surface with respect to the surface generated by peeling in the circumferential direction. Histological analysis of the stressed specimens reveals that tissue damage spreads over approximately six to seven elastic laminae, which is about 15-18% of the thickness of the abdominal aortic media, which forms a pronounced cohesive zone at the dissection front.

Blood flow and coherent vortices in the normal and aneurysmatic aortas: a fluid dynamical approach to intra-luminal thrombus formation

Abstract: Abdominal aortic aneurysms (AAAs) are frequently characterized by the development of an intra-luminal thrombus (ILT), which is known to have multiple biochemical and biomechanical implications. Dev ...

Nothing in Biology Makes Sense Except in the Light of Evolution

Abstract: Nothing in biology makes sense except in the light of evolution, quipped Theodosius Dobzhansky. The theory of evolution argues that each biological species was not suddenly and independently created but that all life forms are interrelated by virtue of having descended from common ancestors through the accumulation of modifications. Indeed, nothing we know about living organisms would make any sense if they were not so interrelated. And the theory that biological species are descended from common ancestors provides an indispensable heuristic to understand why living organisms are what they are and do what they do.

Ageing of the conduit arteries.

Abstract: Conduit arteries become stiffer with age due to alterations in their morphology and the composition of the their major structural proteins, elastin and collagen. The elastic lamellae undergo fragmentation and thinning, leading to ectasia and a gradual transfer of mechanical load to collagen, which is 100–1000 times stiffer than elastin. Possible causes of this fragmentation are mechanical (fatigue failure) or enzymatic (driven by matrix metallo proteinases (MMP) activity), both of which may have genetic or environmental origins (fetal programming). Furthermore, the remaining elastin itself becomes stiffer, owing to calcification and the formation of cross-links due to advanced glycation end-products (AGEs), a process that affects collagen even more strongly. These changes are accelerated in the presence of disease such as hypertension, diabetes and uraemia and may be exacerbated locally by atherosclerosis. Raised MMP activity, calcification and impaired endothelial function are also associated with a high level of plasma homocysteine, which itself increases with age. Impaired endothelial function leads to increased resting vascular smooth muscle tone and further increases in vascular stiffness and mean and/or pulse pressure. The effect of increased stiffness, whatever its underlying causes, is to reduce the reservoir/buffering function of the conduit arteries near the heart and to increase pulse wave velocity, both of which increase systolic and pulse pressure. These determine the peak load on the heart and the vascular system as a whole, the breakdown of which, like that of any machine, depends more on the maximum loads they must bear than on their average. Reversing or stabilising the increased arterial stiffness associated with age and disease by targeting any or all of its causes provides a number of promising new approaches to the treatment of systolic hypertension and its sequelae, the main causes of mortality and morbidity in the developed world. Copyright  2007 Pathological Society of Great Britain and Ireland. Published by John Wiley & Sons, Ltd.

Characterization of the anisotropic mechanical properties of excised human skin

Abstract: The mechanical properties of skin are important for a number of applications including surgery, dermatology, impact biomechanics and forensic science. In this study, we have investigated the influence of location and orientation on the deformation characteristics of 56 samples of excised human skin. Uniaxial tensile tests were carried out at a strain rate of 0.012 s(-1) on skin from the back. Digital Image Correlation was used for 2D strain measurement and a histological examination of the dermis was also performed. The mean ultimate tensile strength (UTS) was 21.6±8.4 MPa, the mean failure strain 54%±17%, the mean initial slope 1.18±0.88 MPa, the mean elastic modulus 83.3±34.9 MPa and the mean strain energy was 3.6±1.6 MJ/m(3). A multivariate analysis of variance has shown that these mechanical properties of skin are dependent upon the orientation of the Langer lines (P<0.0001-P=0.046). The location of specimens on the back was also found to have a significant effect on the UTS (P=0.0002), the elastic modulus (P=0.001) and the strain energy (P=0.0052). The histological investigation concluded that there is a definite correlation between the orientation of the Langer lines and the preferred orientation of collagen fibres in the dermis (P<0.001). The data obtained in this study will provide essential information for those wishing to model the skin using a structural constitutive model.

The return of a forgotten polymer : Polycaprolactone in the 21st century

Abstract: During the resorbable-polymer-boom of the 1970s and 1980s, polycaprolactone (PCL) was used in the biomaterials field and a number of drug-delivery devices. Its popularity was soon superseded by faster resorbable polymers which had fewer perceived disadvantages associated with long term degradation (up to 3-4 years) and intracellular resorption pathways; consequently, PCL was almost forgotten for most of two decades. Recently, a resurgence of interest has propelled PCL back into the biomaterials-arena. The superior rheological and viscoelastic properties over many of its aliphatic polyester counterparts renders PCL easy to manufacture and manipulate into a large range of implants and devices. Coupled with relatively inexpensive production routes and FDA approval, this provides a promising platform for the production of longer-term degradable implants which may be manipulated physically, chemically and biologically to possess tailorable degradation kinetics to suit a specific anatomical site. This review will discuss the application of PCL as a biomaterial over the last two decades focusing on the advantages which have propagated its return into the spotlight with a particular focus on medical devices, drug delivery and tissue engineering.