Steady-state visually evoked potentials: focus on essential paradigms and future perspectives.

Brain-computer interface (BCI) systems based on the steady-state visual evoked potential (SSVEP) provide higher information throughput and require shorter training than BCI systems using other brain signals. To elicit an SSVEP, a repetitive visual stimulus (RVS) has to be presented to the user. The RVS can be rendered on a computer screen by alternating graphical patterns, or with external light sources able to emit modulated light. The properties of an RVS (e.g., frequency, color) depend on the rendering device and influence the SSVEP characteristics. This affects the BCI information throughput and the levels of user safety and comfort. Literature on SSVEP-based BCIs does not generally provide reasons for the selection of the used rendering devices or RVS properties. In this paper, we review the literature on SSVEP-based BCIs and comprehensively report on the different RVS choices in terms of rendering devices, properties, and their potential influence on BCI performance, user safety and comfort.

/pdf/a-survey-of-stimulation-methods-used-in-ssvep-based-bcis-38omyw8mqs.pdf

A survey of stimulation methods used in SSVEP-based BCIs

In this paper, novel methods for detecting steady-state visual evoked potentials using multiple electroencephalogram (EEG) signals are presented. The methods are tailored for brain-computer interfacing, where fast and accurate detection is of vital importance for achieving high information transfer rates. High detection accuracy using short time segments is obtained by finding combinations of electrode signals that cancel strong interference signals in the EEG data. Data from a test group consisting of 10 subjects are used to evaluate the new methods and to compare them to standard techniques. Using 1-s signal segments, six different visual stimulation frequencies could be discriminated with an average classification accuracy of 84%. An additional advantage of the presented methodology is that it is fully online, i.e., no calibration data for noise estimation, feature extraction, or electrode selection is needed

Multiple Channel Detection of Steady-State Visual Evoked Potentials for Brain-Computer Interfaces

Recently, electroencephalogram (EEG)-based brain- computer interfaces (BCIs) have become a hot spot in the study of neural engineering, rehabilitation, and brain science. In this article, we review BCI systems based on visual evoked potentials (VEPs). Although the performance of this type of BCI has already been evaluated by many research groups through a variety of laboratory demonstrations, researchers are still facing many difficulties in changing the demonstrations to practically applicable systems. On the basis of the literature, we describe the challenges in developing practical BCI systems. Also, our recent work in the designs and implementations of the BCI systems based on steady-state VEPs (SSVEPs) is described in detail. The results show that by adequately considering the problems encountered in system design, signal processing, and parameter optimization, SSVEPs can provide the most useful information about brain activities using the least number of electrodes. At the same time, system cost could be greatly decreased and usability could be readily improved, thus benefiting the implementation of a practical BCI.

/pdf/brain-computer-interfaces-based-on-visual-evoked-potentials-42k2yzlk1z.pdf

Brain-Computer Interfaces Based on Visual Evoked Potentials

Over the past several decades, electroencephalogram (EEG)-based brain-computer interfaces (BCIs) have attracted attention from researchers in the field of neuroscience, neural engineering, and clinical rehabilitation. While the performance of BCI systems has improved, they do not yet support widespread usage. Recently, visual and auditory BCI systems have become popular because of their high communication speeds, little user training, and low user variation. However, building robust and practical BCI systems from physiological and technical knowledge of neural modulation of visual and auditory brain responses remains a challenging problem. In this paper, we review the current state and future challenges of visual and auditory BCI systems. First, we describe a new taxonomy based on the multiple access methods used in telecommunication systems. Then, we discuss the challenges of translating current technology into real-life practices and outline potential avenues to address them. Specifically, this review aims to provide useful guidelines for exploring new paradigms and methodologies to improve the current visual and auditory BCI technology.

https://sccn.ucsd.edu/~yijun/pdfs/TBME14.pdf

Visual and Auditory Brain–Computer Interfaces

The objective is to increase the number of selections in brain computer interfaces (BCI) by recording and analyzing the steady state visual evoked potential response to dual stimulation. A BCI translates the VEP signals into user commands. The frequency band from which stimulation frequency can be selected is limited for SSVEP. This paper discusses a method to increase the number of commands by using a suitable combination of frequencies for stimulation. A biopotential amplifier based on the driven right leg circuit (DRL) is used to record 60 s epochs of the SSVEP (O(z)-A(1)) on 15 subjects using simultaneous overlapped stimulation (6, 7, 12, 13 and 14 Hzs and corresponding half frequencies). The power spectrum of each recording is obtained by frequency domain averaging of 400 ms SSVEPs and the spectral peaks were normalized. The spectral peaks of the combination frequencies of stimulation are predominant compared to individual stimulating frequencies. This method increases the number of selections by using a limited number of stimulating frequencies in BCI. For example, six selections are possible by generating only three frequencies.

http://iopscience.iop.org/article/10.1088/0967-3334/27/1/006/pdf

A novel multiple frequency stimulation method for steady state VEP based brain computer interfaces

An algorithm for implementing visual stimulators on generic computers has been developed for brain computer interfaces (BCIs). It uses the hardware counter present in these systems to derive accurate timing. Simultaneous display of 20 patterns (e.g. 3times3 checkerboards) modulated at different frequencies is possible. The pattern used for stimulating the steady state visual evoked potential (SSVEP) can be changed with ease. The stimulators are evaluated using software counters. High accuracy (less than 0.73% error) and precision (0.1% coefficient of variation) is recorded for 20 patterns set with frequencies between 6 Hz and 15 Hz

T.M. Srihari Mukesh

Papers

A novel multiple frequency stimulation method for steady state VEP based brain computer interfaces

Design and implementation of High Performance Visual Stimulator for Brain Computer Interfaces