scispace - formally typeset
Search or ask a question
Author

T. Osotchan

Bio: T. Osotchan is an academic researcher. The author has contributed to research in topics: Electron mobility & Electron density. The author has an hindex of 1, co-authored 1 publications receiving 453 citations.

Papers
More filters
Journal ArticleDOI
TL;DR: In this paper, the authors calculated the electron mobility in GaN and InN as a function of temperature for carrier concentrations of 1016, 1017, and 1018 cm−3 with compensation ratio as a parameter.
Abstract: Electron mobilities in GaN and InN are calculated, by variational principle, as a function of temperature for carrier concentrations of 1016, 1017, and 1018 cm−3 with compensation ratio as a parameter. Both GaN and InN have maximum mobilities between 100 and 200 K, depending on the electron density and compensation ratio, with lower electron density peaking at lower temperature. This is due to the interplay of piezoelectric acoustic phonon scattering at low carrier concentrations and ionized impurity scattering at higher carrier concentrations. Above 200 K, polar mode optical phonon scattering is the mobility limiting process. The 300 and 77 K electron and Hall mobilities as functions of carrier concentration in the range of 1016–1020 cm−3 and compensation ratio are also calculated. The theoretical maximum mobilities in GaN and InN at 300 K are about 1000 and 4400 cm2 V−1 s−1, respectively, while at 77 K the limits are beyond 6000 and 30 000 cm2 V−1 s−1, respectively. We compare the results with experimental data and find reasonable correlation, but with evidence that structural imperfection and heavy compensation play important roles in the material presently available. Only phonon limited scattering processes are considered in the calculation of the mobility in AlN since it is an insulator of extremely low carrier concentration. We find a phonon limited electron mobility of about 300 cm2 V−1 s−1 at 300 K.

479 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: The role of extended and point defects, and key impurities such as C, O, and H, on the electrical and optical properties of GaN is reviewed in this article, along with the influence of process-induced or grown-in defects and impurities on the device physics.
Abstract: The role of extended and point defects, and key impurities such as C, O, and H, on the electrical and optical properties of GaN is reviewed. Recent progress in the development of high reliability contacts, thermal processing, dry and wet etching techniques, implantation doping and isolation, and gate insulator technology is detailed. Finally, the performance of GaN-based electronic and photonic devices such as field effect transistors, UV detectors, laser diodes, and light-emitting diodes is covered, along with the influence of process-induced or grown-in defects and impurities on the device physics.

1,693 citations

Journal ArticleDOI
TL;DR: In this article, the chemical and thermal stability of epitaxial nitride films is discussed in relation to the problems of deposition processes and the advantages for applications in high-power and high-temperature devices.
Abstract: Recent research results pertaining to InN, GaN and AlN are reviewed, focusing on the different growth techniques of Group III-nitride crystals and epitaxial films, heterostructures and devices. The chemical and thermal stability of epitaxial nitride films is discussed in relation to the problems of deposition processes and the advantages for applications in high-power and high-temperature devices. The development of growth methods like metalorganic chemical vapour deposition and plasma-induced molecular beam epitaxy has resulted in remarkable improvements in the structural, optical and electrical properties. New developments in precursor chemistry, plasma-based nitrogen sources, substrates, the growth of nucleation layers and selective growth are covered. Deposition conditions and methods used to grow alloys for optical bandgap and lattice engineering are introduced. The review is concluded with a description of recent Group III-nitride semiconductor devices such as bright blue and white light-emitting diodes, the first blue-emitting laser, high-power transistors, and a discussion of further applications in surface acoustic wave devices and sensors.

1,386 citations

Journal ArticleDOI
TL;DR: In this paper, a comprehensive analysis of the developments in ultraviolet (UV) detector technology is described and the current state of the art of different types of semiconductor UV detectors is presented.
Abstract: In this review article a comprehensive analysis of the developments in ultraviolet (UV) detector technology is described. At the beginning, the classification of UV detectors and general requirements imposed on these detectors are presented. Further considerations are restricted to modern semiconductor UV detectors, so the basic theory of photoconductive and photovoltaic detectors is presented in a uniform way convenient for various detector materials. Next, the current state of the art of different types of semiconductor UV detectors is presented. Hitherto, the semiconductor UV detectors have been mainly fabricated using Si. Industries such as the aerospace, automotive, petroleum, and others have continuously provided the impetus pushing the development of fringe technologies which are tolerant of increasingly high temperatures and hostile environments. As a result, the main efforts are currently directed to a new generation of UV detectors fabricated from wide band‐gap semiconductors the most promising ...

1,308 citations

Journal ArticleDOI
TL;DR: In this paper, the authors reviewed the development of indium nitride (InN) semiconductors from its evolution to the present day and discussed the most popular growth techniques, metalorganic vapor phase epitaxy and molecular beam epitaxy.
Abstract: During the last few years the interest in the indium nitride (InN) semiconductor has been remarkable. There have been significant improvements in the growth of InN films. High quality single crystalline InN film with two-dimensional growth and high growth rate are now routinely obtained. The background carrier concentration and Hall mobility have also improved. Observation of strong photoluminescence near the band edge is reported very recently, leading to conflicts concerning the exact band gap of InN. Attempts have also been made on the deposition of InN based heterostructures for the fabrication of InN based electronic devices. Preliminary evidence of two-dimensional electron gas accumulation in the InN and studies on InN-based field-effect transistor structure are reported. In this article, the work accomplished in the InN research, from its evolution to till now, is reviewed. The In containing alloys or other nitrides (AlGaInN, GaN,AlN) are not discussed here. We mainly concentrate on the growth, characterization, and recent developments in InN research. The most popular growth techniques, metalorganic vapor phase epitaxy and molecular beam epitaxy, are discussed in detail with their recent progress. Important phenomena in the epitaxialgrowth of InN as well as the problems remaining for future study are also discussed.

815 citations

Journal ArticleDOI
TL;DR: The UWBG semiconductor materials, such as high Al‐content AlGaN, diamond and Ga2O3, advanced in maturity to the point where realizing some of their tantalizing advantages is a relatively near‐term possibility.
Abstract: J. Y. Tsao,* S. Chowdhury, M. A. Hollis,* D. Jena, N. M. Johnson, K. A. Jones, R. J. Kaplar,* S. Rajan, C. G. Van de Walle, E. Bellotti, C. L. Chua, R. Collazo, M. E. Coltrin, J. A. Cooper, K. R. Evans, S. Graham, T. A. Grotjohn, E. R. Heller, M. Higashiwaki, M. S. Islam, P. W. Juodawlkis, M. A. Khan, A. D. Koehler, J. H. Leach, U. K. Mishra, R. J. Nemanich, R. C. N. Pilawa-Podgurski, J. B. Shealy, Z. Sitar, M. J. Tadjer, A. F. Witulski, M. Wraback, and J. A. Simmons

785 citations