A microscopic mechanism for steady state inhomogeneous flow in metallic glasses

Shear-banding is a ubiquitous plastic-deformation mode in materials. In metallic glasses, shear bands are particularly important as they play the decisive role in controlling plasticity and failure at room temperature. While there have been several reviews on the general mechanical properties of metallic glasses, a pressing need remains for an overview focused exclusively on shear bands, which have received tremendous attention in the past several years. This article attempts to provide a comprehensive and up-to-date review on the rapid progress achieved very recently on this subject. We describe the shear bands from the inside out, and treat key materials-science issues of general interest, including the initiation of shear localization starting from shear transformations, the temperature and velocity reached in the propagating or sliding band, the structural evolution inside the shear-band material, and the parameters that strongly influence shear-banding. Several new discoveries and concepts, such as stick-slip cold shear-banding and strength/plasticity enhancement at sub-micrometer sample sizes, will also be highlighted. The understanding built-up from these accounts will be used to explain the successful control of shear bands achieved so far in the laboratory. The review also identifies a number of key remaining questions to be answered, and presents an outlook for the field.

Shear bands in metallic glasses

REVIEW ARTICLE: Glassy metals

Bulk metallic glass (BMG) formers are multicomponent alloys that vitrify with remarkable ease during solidification. Technological interest in these materials has been generated by their unique properties, which often surpass those of conventional structural materials. The metastable nature of BMGs, however, has imposed a barrier to broad commercial adoption, particularly where the processing requirements of these alloys conflict with conventional metal processing methods. Research on the crystallization of BMG formers has uncovered novel thermoplastic forming (TPF)-based processing opportunities. Unique among metal processing methods, TPF utilizes the dramatic softening exhibited by a BMG as it approaches its glass-transition temperature and decouples the rapid cooling required to form a glass from the forming step. This article reviews crystallization processes in BMG former and summarizes and compares TPF-based processing methods. Finally, an assessment of scientific and technological advancements required for broader commercial utilization of BMGs will be made.

Processing of Bulk Metallic Glass

Difference in compressive and tensile fracture mechanisms of Zr59CU20Al10Ni8Ti3 bulk metallic glass

The tensile flow and fracture behavior of three Pdo.8Sio2-based alloys in the glassy, “microcrystalline,” and fully crystalline condition has been studied. The glassy alloys flow plastically to a total strain of approximately 0.5 pct e, and exhibit proportional limit stresses of approximatelyE x 10~2 whereE is Young’s modulus. This plastic flow is accompanied by the formation of shear deformation bands on the specimen surfaces. Fully crystalline alloys are extremely brittle and fracture via intergranular cracking. Fracture surfaces of the amorphous and “microcrystalline” alloys are inclined at 45 deg to the tensile axis and exhibit two morphologically distinct zones. One zone is relatively featureless while the other contains a “river” pattern of local necking protrusions. Detailed comparison of opposing surfaces indicates that fracture is preceded by large local plastic shear which produces the smooth zone while the local necking pattern is produced during rupture. These observations form the basis for the hypothesis that plastic flow in the glassy material occurs via localized strain concentrations and that fracture is initiated by catastrophic, “adiabatic” shear.

T. T. Wang

Papers

Plastic flow and fracture of metallic glass