T. V. Lakshman

Bio: T. V. Lakshman is an academic researcher from Bell Labs. The author has contributed to research in topics: Network packet & Routing protocol. The author has an hindex of 57, co-authored 165 publications receiving 14255 citations. Previous affiliations of T. V. Lakshman include Alcatel-Lucent.

The performance of TCP/IP for networks with high bandwidth-delay products and random loss

Abstract: This paper examines the performance of TCP/IP, the Internet data transport protocol, over wide-area networks (WANs) in which data traffic could coexist with real-time traffic such as voice and video. Specifically, we attempt to develop a basic understanding, using analysis and simulation, of the properties of TCP/IP in a regime where: (1) the bandwidth-delay product of the network is high compared to the buffering in the network and (2) packets may incur random loss (e.g., due to transient congestion caused by fluctuations in real-time traffic, or wireless links in the path of the connection). The following key results are obtained. First, random loss leads to significant throughput deterioration when the product of the loss probability and the square of the bandwidth-delay product is larger than one. Second, for multiple connections sharing a bottleneck link, TCP is grossly unfair toward connections with higher round-trip delays. This means that a simple first in first out (FIFO) queueing discipline might not suffice for data traffic in WANs. Finally, while the Reno version of TCP produces less bursty traffic than the original Tahoe version, it is less robust than the latter when successive losses are closely spaced. We conclude by indicating modifications that may be required both at the transport and network layers to provide good end-to-end performance over high-speed WANs.

SRED: stabilized RED

Abstract: This paper describes a mechanism we call "SRED" (stabilized random early drop). Like RED (random early detection) SRED pre-emptively discards packets with a load-dependent probability when a buffer in a router in the Internet or an intranet seems congested. SRED has an additional feature that over a wide range of load levels helps it stabilize its buffer occupation at a level independent of the number of active connections. SRED does this by estimating the number of active connections or flows. This estimate is obtained without collecting or analyzing state information on individual flows. The same mechanism can be used to identify flows that may be misbehaving, i.e. are taking more than their fair share of bandwidth. Since the mechanism is statistical in nature, the next step must be to collect state information of the candidates for "misbehaving", and to analyze that information. We show that candidate rows thus identified indeed have a high posterior probability of taking a larger than average amount of bandwidth.

High-speed policy-based packet forwarding using efficient multi-dimensional range matching

Abstract: The ability to provide differentiated services to users with widely varying requirements is becoming increasingly important, and Internet Service Providers would like to provide these differentiated services using the same shared network infrastructure. The key mechanism, that enables differentiation in a connectionless network, is the packet classification function that parses the headers of the packets, and after determining their context, classifies them based on administrative policies or real-time reservation decisions. Packet classification, however, is a complex operation that can become the bottleneck in routers that try to support gigabit link capacities. Hence, many proposals for differentiated services only require classification at lower speed edge routers and also avoid classification based on multiple fields in the packet header even if it might be advantageous to service providers. In this paper, we present new packet classification schemes that, with a worst-case and traffic-independent performance metric, can classify packets, by checking amongst a few thousand filtering rules, at rates of a million packets per second using range matches on more than 4 packet header fields. For a special case of classification in two dimensions, we present an algorithm that can handle more than 128K rules at these speeds in a traffic independent manner. We emphasize worst-case performance over average case performance because providing differentiated services requires intelligent queueing and scheduling of packets that precludes any significant queueing before the differentiating step (i.e., before packet classification). The presented filtering or classification schemes can be used to classify packets for security policy enforcement, applying resource management decisions, flow identification for RSVP reservations, multicast look-ups, and for source-destination and policy based routing. The scalability and performance of the algorithms have been demonstrated by implementation and testing in a prototype system.

Towards an elastic distributed SDN controller

Abstract: Distributed controllers have been proposed for Software Defined Networking to address the issues of scalability and reliability that a centralized controller suffers from. One key limitation of the distributed controllers is that the mapping between a switch and a controller is statically configured, which may result in uneven load distribution among the controllers. To address this problem, we propose ElastiCon, an elastic distributed controller architecture in which the controller pool is dynamically grown or shrunk according to traffic conditions and the load is dynamically shifted across controllers. We propose a novel switch migration protocol for enabling such load shifting, which conforms with the Openflow standard. We also build a prototype to demonstrate the efficacy of our design.

Traffic engineering in software defined networks

Abstract: Software Defined Networking is a new networking paradigm that separates the network control plane from the packet forwarding plane and provides applications with an abstracted centralized view of the distributed network state. A logically centralized controller that has a global network view is responsible for all the control decisions and it communicates with the network-wide distributed forwarding elements via standardized interfaces. Google recently announced [5] that it is using a Software Defined Network (SDN) to interconnect its data centers due to the ease, efficiency and flexibility in performing traffic engineering functions. It expects the SDN architecture to result in better network capacity utilization and improved delay and loss performance. The contribution of this paper is on the effective use of SDNs for traffic engineering especially when SDNs are incrementally introduced into an existing network. In particular, we show how to leverage the centralized controller to get significant improvements in network utilization as well as to reduce packet losses and delays. We show that these improvements are possible even in cases where there is only a partial deployment of SDN capability in a network. We formulate the SDN controller's optimization problem for traffic engineering with partial deployment and develop fast Fully Polynomial Time Approximation Schemes (FPTAS) for solving these problems. We show, by both analysis and ns-2 simulations, the performance gains that are achievable using these algorithms even with an incrementally deployed SDN.

Internet of Things: A Survey on Enabling Technologies, Protocols, and Applications

Abstract: This paper provides an overview of the Internet of Things (IoT) with emphasis on enabling technologies, protocols, and application issues. The IoT is enabled by the latest developments in RFID, smart sensors, communication technologies, and Internet protocols. The basic premise is to have smart sensors collaborate directly without human involvement to deliver a new class of applications. The current revolution in Internet, mobile, and machine-to-machine (M2M) technologies can be seen as the first phase of the IoT. In the coming years, the IoT is expected to bridge diverse technologies to enable new applications by connecting physical objects together in support of intelligent decision making. This paper starts by providing a horizontal overview of the IoT. Then, we give an overview of some technical details that pertain to the IoT enabling technologies, protocols, and applications. Compared to other survey papers in the field, our objective is to provide a more thorough summary of the most relevant protocols and application issues to enable researchers and application developers to get up to speed quickly on how the different protocols fit together to deliver desired functionalities without having to go through RFCs and the standards specifications. We also provide an overview of some of the key IoT challenges presented in the recent literature and provide a summary of related research work. Moreover, we explore the relation between the IoT and other emerging technologies including big data analytics and cloud and fog computing. We also present the need for better horizontal integration among IoT services. Finally, we present detailed service use-cases to illustrate how the different protocols presented in the paper fit together to deliver desired IoT services.

Software-Defined Networking: A Comprehensive Survey

Abstract: The Internet has led to the creation of a digital society, where (almost) everything is connected and is accessible from anywhere. However, despite their widespread adoption, traditional IP networks are complex and very hard to manage. It is both difficult to configure the network according to predefined policies, and to reconfigure it to respond to faults, load, and changes. To make matters even more difficult, current networks are also vertically integrated: the control and data planes are bundled together. Software-defined networking (SDN) is an emerging paradigm that promises to change this state of affairs, by breaking vertical integration, separating the network's control logic from the underlying routers and switches, promoting (logical) centralization of network control, and introducing the ability to program the network. The separation of concerns, introduced between the definition of network policies, their implementation in switching hardware, and the forwarding of traffic, is key to the desired flexibility: by breaking the network control problem into tractable pieces, SDN makes it easier to create and introduce new abstractions in networking, simplifying network management and facilitating network evolution. In this paper, we present a comprehensive survey on SDN. We start by introducing the motivation for SDN, explain its main concepts and how it differs from traditional networking, its roots, and the standardization activities regarding this novel paradigm. Next, we present the key building blocks of an SDN infrastructure using a bottom-up, layered approach. We provide an in-depth analysis of the hardware infrastructure, southbound and northbound application programming interfaces (APIs), network virtualization layers, network operating systems (SDN controllers), network programming languages, and network applications. We also look at cross-layer problems such as debugging and troubleshooting. In an effort to anticipate the future evolution of this new paradigm, we discuss the main ongoing research efforts and challenges of SDN. In particular, we address the design of switches and control platforms—with a focus on aspects such as resiliency, scalability, performance, security, and dependability—as well as new opportunities for carrier transport networks and cloud providers. Last but not least, we analyze the position of SDN as a key enabler of a software-defined environment.

Principles and Practices of Interconnection Networks

Abstract: One of the greatest challenges faced by designers of digital systems is optimizing the communication and interconnection between system components. Interconnection networks offer an attractive and economical solution to this communication crisis and are fast becoming pervasive in digital systems. Current trends suggest that this communication bottleneck will be even more problematic when designing future generations of machines. Consequently, the anatomy of an interconnection network router and science of interconnection network design will only grow in importance in the coming years. This book offers a detailed and comprehensive presentation of the basic principles of interconnection network design, clearly illustrating them with numerous examples, chapter exercises, and case studies. It incorporates hardware-level descriptions of concepts, allowing a designer to see all the steps of the process from abstract design to concrete implementation. ·Case studies throughout the book draw on extensive author experience in designing interconnection networks over a period of more than twenty years, providing real world examples of what works, and what doesn't. ·Tightly couples concepts with implementation costs to facilitate a deeper understanding of the tradeoffs in the design of a practical network. ·A set of examples and exercises in every chapter help the reader to fully understand all the implications of every design decision. Table of Contents Chapter 1 Introduction to Interconnection Networks 1.1 Three Questions About Interconnection Networks 1.2 Uses of Interconnection Networks 1.3 Network Basics 1.4 History 1.5 Organization of this Book Chapter 2 A Simple Interconnection Network 2.1 Network Specifications and Constraints 2.2 Topology 2.3 Routing 2.4 Flow Control 2.5 Router Design 2.6 Performance Analysis 2.7 Exercises Chapter 3 Topology Basics 3.1 Nomenclature 3.2 Traffic Patterns 3.3 Performance 3.4 Packaging Cost 3.5 Case Study: The SGI Origin 2000 3.6 Bibliographic Notes 3.7 Exercises Chapter 4 Butterfly Networks 4.1 The Structure of Butterfly Networks 4.2 Isomorphic Butterflies 4.3 Performance and Packaging Cost 4.4 Path Diversity and Extra Stages 4.5 Case Study: The BBN Butterfly 4.6 Bibliographic Notes 4.7 Exercises Chapter 5 Torus Networks 5.1 The Structure of Torus Networks 5.2 Performance 5.3 Building Mesh and Torus Networks 5.4 Express Cubes 5.5 Case Study: The MIT J-Machine 5.6 Bibliographic Notes 5.7 Exercises Chapter 6 Non-Blocking Networks 6.1 Non-Blocking vs. Non-Interfering Networks 6.2 Crossbar Networks 6.3 Clos Networks 6.4 Benes Networks 6.5 Sorting Networks 6.6 Case Study: The Velio VC2002 (Zeus) Grooming Switch 6.7 Bibliographic Notes 6.8 Exercises Chapter 7 Slicing and Dicing 7.1 Concentrators and Distributors 7.2 Slicing and Dicing 7.3 Slicing Multistage Networks 7.4 Case Study: Bit Slicing in the Tiny Tera 7.5 Bibliographic Notes 7.6 Exercises Chapter 8 Routing Basics 8.1 A Routing Example 8.2 Taxonomy of Routing Algorithms 8.3 The Routing Relation 8.4 Deterministic Routing 8.5 Case Study: Dimension-Order Routing in the Cray T3D 8.6 Bibliographic Notes 8.7 Exercises Chapter 9 Oblivious Routing 9.1 Valiant's Randomized Routing Algorithm 9.2 Minimal Oblivious Routing 9.3 Load-Balanced Oblivious Routing 9.4 Analysis of Oblivious Routing 9.5 Case Study: Oblivious Routing in the Avici Terabit Switch Router(TSR) 9.6 Bibliographic Notes 9.7 Exercises Chapter 10 Adaptive Routing 10.1 Adaptive Routing Basics 10.2 Minimal Adaptive Routing 10.3 Fully Adaptive Routing 10.4 Load-Balanced Adaptive Routing 10.5 Search-Based Routing 10.6 Case Study: Adaptive Routing in the Thinking Machines CM-5 10.7 Bibliographic Notes 10.8 Exercises Chapter 11 Routing Mechanics 11.1 Table-Based Routing 11.2 Algorithmic Routing 11.3 Case Study: Oblivious Source Routing in the IBM Vulcan Network 11.4 Bibliographic Notes 11.5 Exercises Chapter 12 Flow Control Basics 12.1 Resources and Allocation Units 12.2 Bufferless Flow Control 12.3 Circuit Switching 12.4 Bibliographic Notes 12.5 Exercises Chapter 13 Buffered Flow Control 13.1 Packet-Buffer Flow Control 13.2 Flit-Buffer Flow Control 13.3 Buffer Management and Backpressure 13.4 Flit-Reservation Flow Control 13.5 Bibliographic Notes 13.6 Exercises Chapter 14 Deadlock and Livelock 14.1 Deadlock 14.2 Deadlock Avoidance 14.3 Adaptive Routing 14.4 Deadlock Recovery 14.5 Livelock 14.6 Case Study: Deadlock Avoidance in the Cray T3E 14.7 Bibliographic Notes 14.8 Exercises Chapter 15 Quality of Service 15.1 Service Classes and Service Contracts 15.2 Burstiness and Network Delays 15.3 Implementation of Guaranteed Services 15.4 Implementation of Best-Effort Services 15.5 Separation of Resources 15.6 Case Study: ATM Service Classes 15.7 Case Study: Virtual Networks in the Avici TSR 15.8 Bibliographic Notes 15.9 Exercises Chapter 16 Router Architecture 16.1 Basic Router Architecture 16.2 Stalls 16.3 Closing the Loop with Credits 16.4 Reallocating a Channel 16.5 Speculation and Lookahead 16.6 Flit and Credit Encoding 16.7 Case Study: The Alpha 21364 Router 16.8 Bibliographic Notes 16.9 Exercises Chapter 17 Router Datapath Components 17.1 Input Buffer Organization 17.2 Switches 17.3 Output Organization 17.4 Case Study: The Datapath of the IBM Colony Router 17.5 Bibliographic Notes 17.6 Exercises Chapter 18 Arbitration 18.1 Arbitration Timing 18.2 Fairness 18.3 Fixed Priority Arbiter 18.4 Variable Priority Iterative Arbiters 18.5 Matrix Arbiter 18.6 Queuing Arbiter 18.7 Exercises Chapter 19 Allocation 19.1 Representations 19.2 Exact Algorithms 19.3 Separable Allocators 19.4 Wavefront Allocator 19.5 Incremental vs. Batch Allocation 19.6 Multistage Allocation 19.7 Performance of Allocators 19.8 Case Study: The Tiny Tera Allocator 19.9 Bibliographic Notes 19.10 Exercises Chapter 20 Network Interfaces 20.1 Processor-Network Interface 20.2 Shared-Memory Interface 20.3 Line-Fabric Interface 20.4 Case Study: The MIT M-Machine Network Interface 20.5 Bibliographic Notes 20.6 Exercises Chapter 21 Error Control 411 21.1 Know Thy Enemy: Failure Modes and Fault Models 21.2 The Error Control Process: Detection, Containment, and Recovery 21.3 Link Level Error Control 21.4 Router Error Control 21.5 Network-Level Error Control 21.6 End-to-end Error Control 21.7 Bibliographic Notes 21.8 Exercises Chapter 22 Buses 22.1 Bus Basics 22.2 Bus Arbitration 22.3 High Performance Bus Protocol 22.4 From Buses to Networks 22.5 Case Study: The PCI Bus 22.6 Bibliographic Notes 22.7 Exercises Chapter 23 Performance Analysis 23.1 Measures of Interconnection Network Performance 23.2 Analysis 23.3 Validation 23.4 Case Study: Efficiency and Loss in the BBN Monarch Network 23.5 Bibliographic Notes 23.6 Exercises Chapter 24 Simulation 24.1 Levels of Detail 24.2 Network Workloads 24.3 Simulation Measurements 24.4 Simulator Design 24.5 Bibliographic Notes 24.6 Exercises Chapter 25 Simulation Examples 495 25.1 Routing 25.2 Flow Control Performance 25.3 Fault Tolerance Appendix A Nomenclature Appendix B Glossary Appendix C Network Simulator

LT codes

Abstract: We introduce LT codes, the first rateless erasure codes that are very efficient as the data length grows.