Tae Hee Han

Bio: Tae Hee Han is an academic researcher from Hanyang University. The author has contributed to research in topics: Graphene & Perovskite (structure). The author has an hindex of 48, co-authored 173 publications receiving 9994 citations. Previous affiliations of Tae Hee Han include Pohang University of Science and Technology & Seoul National University.

Extremely efficient flexible organic light-emitting diodes with modified graphene anode

Abstract: Although graphene films have a strong potential to replace indium tin oxide anodes in organic light-emitting diodes (OLEDs), to date, the luminous efficiency of OLEDs with graphene anodes has been limited by a lack of efficient methods to improve the low work function and reduce the sheet resistance of graphene films to the levels required for electrodes1,2,3,4. Here, we fabricate flexible OLEDs by modifying the graphene anode to have a high work function and low sheet resistance, and thus achieve extremely high luminous efficiencies (37.2 lm W–1 in fluorescent OLEDs, 102.7 lm W–1 in phosphorescent OLEDs), which are significantly higher than those of optimized devices with an indium tin oxide anode (24.1 lm W–1 in fluorescent OLEDs, 85.6 lm W–1 in phosphorescent OLEDs). We also fabricate flexible white OLED lighting devices using the graphene anode. These results demonstrate the great potential of graphene anodes for use in a wide variety of high-performance flexible organic optoelectronics. By replacing conventional indium tin oxide (ITO) anodes with high-work-function, low-sheet-resistance graphene anodes, researchers demonstrate flexible fluorescent organic LEDs with extremely high luminous efficiencies of 37.2 lm W–1 for fluorescent devices and 102.7 lm W–1 for phosphorescent devices. These values are significantly higher than those of optimized organic LEDs based on ITO anodes.

Noncovalent functionalization of graphene with end-functional polymers

Abstract: Stable dispersion of reduced graphene in various organic solvents was achieved via noncovalent functionalization with amine-terminated polymers. An aqueous dispersion of reduced graphene was prepared by chemical reduction of graphene oxide in aqueous media and was vacuum filtered to generate reduced graphene sheets. Good solvents and nonsolvents for the dried reduced graphene were evaluated using a solubility test. To achieve stable dispersion in the evaluated nonsolvents, amine-terminated polystyrene was noncovalently functionalized to the graphene, while graphene sheets were phase transferred via sonication from aqueous phase to the organic nonsolvent phase, including the amine-terminated polymers. Thorough FTIR and Raman spectroscopy investigation verified that the protonated amine terminal group of polystyrene underwent noncovalent functionalization to the carboxylate groups at the graphene surface, providing the high dispersibility in various organic media.

Graphene oxide liquid crystals.

Abstract: Liquid crystal is the mesomorphic ordered state of anisotropic particles that bears liquid-like fluidity as well as crystal-like ordering. Along with the recent enormous interest in carbon materials, carbon-based liquid crystals hold great promise for high-performance carbon material synthesis or device operation. Liquid-crystalline processing of carbon nanotubes, as well as mesophase pitch, has been employed for highly oriented carbon fiber spinning. Discotic liquid crystals of synthetic graphitic hydrocarbons are promising components for advanced electronics and optoelectronics. Herein, graphene oxide liquid crystals are introduced as a versatile new class of carbon-based liquid crystals. Graphene oxide is the oxygenated form of a monolayer graphene platelet with strong mechanical properties, chemical functionalization capability, and extremely large surface area. Graphene oxide is mass-producible from natural graphite by chemical oxidation and subsequent exfoliation. The hydrophilic surface functional groups, such as epoxide, hydroxy, and carboxy groups that decorate the basal plane and the edge of graphene oxide enable monolayer exfoliation in common polar solvents including water. The solution processibility of graphene oxide offers a practical route to carbon-based composites, paper, or thin film preparation. 8,9] Here, the liquid crystallinity of graphene oxide offers a versatile route to control the molecular organization and the corresponding properties of the carbon-based materials. We prepared exfoliated graphene oxide platelets by following a modified Hummer s method (see the Supporting Information). Graphite was obtained from three different commercial sources (Graphite A, Graphite B, and Graphite C—see the Supporting Information for more details). As

2D perovskite stabilized phase-pure formamidinium perovskite solar cells

Abstract: Compositional engineering has been used to overcome difficulties in fabricating high-quality phase-pure formamidinium perovskite films together with its ambient instability. However, this comes alongside an undesirable increase in bandgap that sacrifices the device photocurrent. Here we report the fabrication of phase-pure formamidinium-lead tri-iodide perovskite films with excellent optoelectronic quality and stability. Incorporation of 1.67 mol% of 2D phenylethylammonium lead iodide into the precursor solution enables the formation of phase-pure formamidinium perovskite with an order of magnitude enhanced photoluminescence lifetime. The 2D perovskite spontaneously forms at grain boundaries to protect the formamidinium perovskite from moisture and suppress ion migration. A stabilized power conversion efficiency (PCE) of 20.64% (certified stabilized PCE of 19.77%) is achieved with a short-circuit current density exceeding 24 mA cm-2 and an open-circuit voltage of 1.130 V, corresponding to a loss-in-potential of 0.35 V, and significantly enhanced operational stability.

25th Anniversary Article: Chemically Modified/Doped Carbon Nanotubes & Graphene for Optimized Nanostructures & Nanodevices

Abstract: Outstanding pristine properties of carbon nanotubes and graphene have limited the scope for real-life applications without precise controllability of the material structures and properties. This invited article to celebrate the 25th anniversary of Advanced Materials reviews the current research status in the chemical modification/doping of carbon nanotubes and graphene and their relevant applications with optimized structures and properties. A broad aspect of specific correlations between chemical modification/doping schemes of the graphitic carbons with their novel tunable material properties is summarized. An overview of the practical benefits from chemical modification/doping, including the controllability of electronic energy level, charge carrier density, surface energy and surface reactivity for diverse advanced applications is presented, namely flexible electronics/optoelectronics, energy conversion/storage, nanocomposites, and environmental remediation, with a particular emphasis on their optimized interfacial structures and properties. Future research direction is also proposed to surpass existing technological bottlenecks and realize idealized graphitic carbon applications.

A roadmap for graphene

Abstract: Recent years have witnessed many breakthroughs in research on graphene (the first two-dimensional atomic crystal) as well as a significant advance in the mass production of this material. This one-atom-thick fabric of carbon uniquely combines extreme mechanical strength, exceptionally high electronic and thermal conductivities, impermeability to gases, as well as many other supreme properties, all of which make it highly attractive for numerous applications. Here we review recent progress in graphene research and in the development of production methods, and critically analyse the feasibility of various graphene applications.

Recent Advances in Ultrathin Two-Dimensional Nanomaterials

Abstract: Since the discovery of mechanically exfoliated graphene in 2004, research on ultrathin two-dimensional (2D) nanomaterials has grown exponentially in the fields of condensed matter physics, material science, chemistry, and nanotechnology. Highlighting their compelling physical, chemical, electronic, and optical properties, as well as their various potential applications, in this Review, we summarize the state-of-art progress on the ultrathin 2D nanomaterials with a particular emphasis on their recent advances. First, we introduce the unique advances on ultrathin 2D nanomaterials, followed by the description of their composition and crystal structures. The assortments of their synthetic methods are then summarized, including insights on their advantages and limitations, alongside some recommendations on suitable characterization techniques. We also discuss in detail the utilization of these ultrathin 2D nanomaterials for wide ranges of potential applications among the electronics/optoelectronics, electrocat...

Functionalization of Graphene: Covalent and Non-Covalent Approaches, Derivatives and Applications

Abstract: Approaches, Derivatives and Applications Vasilios Georgakilas,† Michal Otyepka,‡ Athanasios B. Bourlinos,‡ Vimlesh Chandra, Namdong Kim, K. Christian Kemp, Pavel Hobza,‡,§,⊥ Radek Zboril,*,‡ and Kwang S. Kim* †Institute of Materials Science, NCSR “Demokritos”, Ag. Paraskevi Attikis, 15310 Athens, Greece ‡Regional Centre of Advanced Technologies and Materials, Department of Physical Chemistry, Faculty of Science, Palacky University Olomouc, 17. listopadu 12, 771 46 Olomouc, Czech Republic Center for Superfunctional Materials, Department of Chemistry, Pohang University of Science and Technology, San 31, Hyojadong, Namgu, Pohang 790-784, Korea Institute of Organic Chemistry and Biochemistry, Academy of Sciences of the Czech Republic, v.v.i., Flemingovo naḿ. 2, 166 10 Prague 6, Czech Republic