1980 Preface * 1999 Preface * 1999 Acknowledgements * Introduction * 1 Circular Logic * 2 Phase Singularities (Screwy Results of Circular Logic) * 3 The Rules of the Ring * 4 Ring Populations * 5 Getting Off the Ring * 6 Attracting Cycles and Isochrons * 7 Measuring the Trajectories of a Circadian Clock * 8 Populations of Attractor Cycle Oscillators * 9 Excitable Kinetics and Excitable Media * 10 The Varieties of Phaseless Experience: In Which the Geometrical Orderliness of Rhythmic Organization Breaks Down in Diverse Ways * 11 The Firefly Machine 12 Energy Metabolism in Cells * 13 The Malonic Acid Reagent ('Sodium Geometrate') * 14 Electrical Rhythmicity and Excitability in Cell Membranes * 15 The Aggregation of Slime Mold Amoebae * 16 Numerical Organizing Centers * 17 Electrical Singular Filaments in the Heart Wall * 18 Pattern Formation in the Fungi * 19 Circadian Rhythms in General * 20 The Circadian Clocks of Insect Eclosion * 21 The Flower of Kalanchoe * 22 The Cell Mitotic Cycle * 23 The Female Cycle * References * Index of Names * Index of Subjects

https://www.cambridge.org/core/services/aop-cambridge-core/content/view/596B270197FE27DE5FABB598B6210622/S0025557200150892a.pdf/div-class-title-span-class-italic-the-geometry-of-biological-time-span-by-a-t-winfree-pp-544-dm68-corrected-second-printing-1990-isbn-3-540-52528-9-springer-div.pdf

The geometry of biological time , by A. T. Winfree. Pp 544. DM68. Corrected Second Printing 1990. ISBN 3-540-52528-9 (Springer)

The Smart Grid, regarded as the next generation power grid, uses two-way flows of electricity and information to create a widely distributed automated energy delivery network. In this article, we survey the literature till 2011 on the enabling technologies for the Smart Grid. We explore three major systems, namely the smart infrastructure system, the smart management system, and the smart protection system. We also propose possible future directions in each system. colorred{Specifically, for the smart infrastructure system, we explore the smart energy subsystem, the smart information subsystem, and the smart communication subsystem.} For the smart management system, we explore various management objectives, such as improving energy efficiency, profiling demand, maximizing utility, reducing cost, and controlling emission. We also explore various management methods to achieve these objectives. For the smart protection system, we explore various failure protection mechanisms which improve the reliability of the Smart Grid, and explore the security and privacy issues in the Smart Grid.

/pdf/smart-grid-the-new-and-improved-power-grid-a-survey-4jypbbgv3j.pdf

Smart Grid — The New and Improved Power Grid: A Survey

Smart Grid - The New and Improved Power Grid:

This book, written by two major figures in adaptive control, provides a wealth of material for researchers, practitioners, and students. While some researchers in adaptive control may note the absence of a particular topic, the book‘s scope represents a high-gain instrument. It can be used by designers of control systems to enhance their work through the information on many new theoretical developments, and can be used by mathematical control theory specialists to adapt their research to practical needs. The book is strongly recommended to anyone interested in adaptive control.

Adaptive Control

Redox flow batteries (RFBs) are enjoying a renaissance due to their ability to store large amounts of electrical energy relatively cheaply and efficiently. In this review, we examine the components of RFBs with a focus on understanding the underlying physical processes. The various transport and kinetic phenomena are discussed along with the most common redox couples.

/pdf/redox-flow-batteries-a-review-2lclb1imlt.pdf

Redox flow batteries: a review

This paper evaluates the capability of SiC power semiconductor devices, in particular JFET and Schottky barrier diodes (SBD) for application in high-temperature power electronics. SiC JFETs and SBDs were packaged in high temperature packages to measure the dc characteristics of these SiC devices at ambient temperatures ranging from 25degC (room temperature) up to 450degC. The results show that both devices can operate at 450degC, which is impossible for conventional Si devices, at the expense of significant derating. The current capability of the SiC SBD does not change with temperature, but as expected the JFET current decreases with rising temperatures. A 100 V, 25 W dc-dc converter is used as an example of a high-temperature power-electronics circuit because of circuit simplicity. The converter is designed and built in accordance with the static characteristics of the SiC devices measured under extremely high ambient temperatures, and then tested up to an ambient temperature of 400degC. The conduction loss of the SiC JFET increases slightly with increasing temperatures, as predicted from its dc characteristics, but its switching characteristics hardly change. Thus, SiC devices are well suited for operation in harsh temperature environments like aerospace and automotive applications.

/pdf/power-conversion-with-sic-devices-at-extremely-high-ambient-3bzl7xfoa2.pdf

Power Conversion With SiC Devices at Extremely High Ambient Temperatures

Renewable, natural, and distributed power sources have been adopted in order to reduce consumption of fossil fuels. These new energy sources have fluctuations in the amount of output power, frequency, and voltage. Similar situation arises at the regulation of power flow in-home. Thus, suppression of the fluctuation is required for avoiding disturbance in power grid. In this paper, two types of in-home power distribution systems are proposed. One is a circuit switching system, and the other is a power packet dispatching system. The experiments show the possibilities of new power management.

In-Home Power Distribution Systems by Circuit Switching and Power Packet Dispatching

A power packet dispatching system is expected to be one of the advanced power distribution systems for controlling electric power, providing energy on demand, and reducing wasted energy consumption. In this paper, power packet routers are designed and experimentally verified for realizing a networked power packet distribution system. While the previously developed router directly forwards the power packet to a load, the new router forwards the packet to the other router with an information tag reattached to the power payload. In addition, the new router can adjust the starting time for forwarding the received power packet to the other site, thus utilizing storage capacity integrated into the router. The results successfully clarify the feasibility of the power packet distribution network.

/pdf/router-for-power-packet-distribution-network-design-and-51s6gquuce.pdf

Router for Power Packet Distribution Network: Design and Experimental Verification

An experimental study on stabilization of unstable periodic motion in magneto-elastic chaos

The switching behavior of semiconductor devices responds to charge/discharge phenomenon of terminal capacitance in the device. The differential capacitance in a semiconductor device varies with the applied voltage in accordance with the depleted region thickness. This study develops a C - V characterization system for high-voltage power transistors (e.g., MOSFET, insulated gate bipolar transistor, and JFET), which realizes the selective measurement of a specified capacitance from among several capacitances integrated in one device. Three capacitances between terminals are evaluated to specify device characteristics-the capacitance for gate-source, gate-drain, and drain-source. The input, output, and reverse transfer capacitance are also evaluated to assess the switching behavior of the power transistor in the circuit. Thus, this paper discusses the five specifications of a C -V characterization system and its measurement results. Moreover, the developed C -V characterization system enables measurement of the transistor capacitances from its blocking condition to the conducting condition with a varying gate bias voltage. The measured C -V characteristics show intricate changes in the low-bias-voltage region, which reflect the device structure. The monotonic capacitance change in the high-voltage region is attributable to the expansion of the depletion region in the drift region. These results help to understand the dynamic behavior of high-power devices during switching operation.

/pdf/measuring-terminal-capacitance-and-its-voltage-dependency-4o5a3iy85v.pdf

Takashi Hikihara

Papers

Power Conversion With SiC Devices at Extremely High Ambient Temperatures

In-Home Power Distribution Systems by Circuit Switching and Power Packet Dispatching

Router for Power Packet Distribution Network: Design and Experimental Verification

An experimental study on stabilization of unstable periodic motion in magneto-elastic chaos

Measuring Terminal Capacitance and Its Voltage Dependency for High-Voltage Power Devices