Takayuki Makino

Bio: Takayuki Makino is an academic researcher from University of Fukui. The author has contributed to research in topics: Photoluminescence & Exciton. The author has an hindex of 27, co-authored 97 publications receiving 5287 citations. Previous affiliations of Takayuki Makino include Centre national de la recherche scientifique & University of Hyogo.

Repeated temperature modulation epitaxy for p-type doping and light-emitting diode based on ZnO

Abstract: Since the successful demonstration of a blue light-emitting diode (LED)1, potential materials for making short-wavelength LEDs and diode lasers have been attracting increasing interest as the demands for display, illumination and information storage grow2,3,4. Zinc oxide has substantial advantages including large exciton binding energy, as demonstrated by efficient excitonic lasing on optical excitation5,6. Several groups have postulated the use of p-type ZnO doped with nitrogen, arsenic or phosphorus7,8,9,10, and even p–n junctions11,12,13. However, the choice of dopant and growth technique remains controversial and the reliability of p-type ZnO is still under debate14. If ZnO is ever to produce long-lasting and robust devices, the quality of epitaxial layers has to be improved as has been the protocol in other compound semiconductors15. Here we report high-quality undoped films with electron mobility exceeding that in the bulk. We have used a new technique to fabricate p-type ZnO reproducibly. Violet electroluminescence from homostructural p–i–n junctions is demonstrated at room-temperature.

Room-temperature stimulated emission of excitons in ZnO/(Mg, Zn)O superlattices

Abstract: We report on the observation of stimulated emission in ZnO/MgxZn1−xO superlattices well above room temperature. Two kinds of superlattices grown by laser molecular-beam epitaxy showed clear systematics on the quantum subband levels in absorption and spontaneous emission spectra. Stimulated emission with excitonic origin could be observed at very low optical pumping levels. The threshold excitation intensity changed from 11 to 40 kW/cm2, and the emission energy could be tuned between 3.2 and 3.4 eV, depending on the well thickness and/or the Mg content in the barrier layers. The excitonic stimulated emission could be observed up to 373 K and the characteristic temperature was as high as 87 K.

Room-temperature luminescence of excitons in ZnO/(Mg, Zn)O multiple quantum wells on lattice-matched substrates

Abstract: We report on the optical properties of ZnO/(Mg, Zn)O multiple quantum wells (MQWs) on lattice-matched ScAlMgO4 substrates fabricated by laser molecular-beam epitaxy. As the well layer thickness decreased down to 7 A, the photoluminescence (PL) and absorption peaks showed a systematic blueshift, consistent with the quantum-size effect. Moreover, a bright PL of free excitons could be observed even at room temperature. As a result, the PL could be tuned in the energy range of 3.3–3.6 eV by choosing the appropriate barrier height and well layer thickness. The widest tunability on the room-temperature luminescence of the excitons could be attained on the basis of the ZnO quantum structure. These favorable properties could not be attained in the MQWs on lattice-mismatched sapphire substrates.

Exciton spectra of ZnO epitaxial layers on lattice-matched substrates grown with laser-molecular-beam epitaxy

Abstract: Optical properties in undoped-ZnO epilayers grown by the laser-molecular-beam epitaxy method on lattice-matched ScAlMgO4 substrates were investigated. The absorption spectrum at 5 K has two sharp peaks, both of which are attributed to resonances of A and B excitons, which reflect a small nonradiative damping constant of excitons as well as high film crystallinity accomplished by the virtue of lattice matching. The coupling strengths of exciton-acoustic phonon and of exciton–longitudinal-optical phonon were directly determined from the temperature dependence of exciton absorption spectra independently for A and B excitons, which are close in energy and obey the same selection rule for each other.

Enhancement of exciton binding energies in ZnO/ZnMgO multiquantum wells

Abstract: The effect of confinement on the exciton binding energies has been systematically investigated for two series of ZnO/ZnMgO multiquantum wells with various well widths and barrier heights. The exciton binding energies were extracted from the energy difference between the stimulated emission band induced by inelastic exciton–exciton scattering and the free exciton absorption band. The binding energies of excitons are found to be sensitively dependent on the well widths. The experimental results of the well width dependence of binding energies are in good agreement with Coli and Bajaj’s theoretical calculations for these structures [G. Coli and K. K. Bajaj, Appl. Phys. Lett. 78, 2861 (2001)]. The remarkable reduction in coupling strength between excitons and longitudinal optical phonons is closely correlated with the enhancement of the exciton binding energy, indicating that the stability of excitons is greatly increased by the enhancement of exciton binding energy in quantum wells.

A comprehensive review of zno materials and devices

Abstract: The semiconductor ZnO has gained substantial interest in the research community in part because of its large exciton binding energy (60meV) which could lead to lasing action based on exciton recombination even above room temperature. Even though research focusing on ZnO goes back many decades, the renewed interest is fueled by availability of high-quality substrates and reports of p-type conduction and ferromagnetic behavior when doped with transitions metals, both of which remain controversial. It is this renewed interest in ZnO which forms the basis of this review. As mentioned already, ZnO is not new to the semiconductor field, with studies of its lattice parameter dating back to 1935 by Bunn [Proc. Phys. Soc. London 47, 836 (1935)], studies of its vibrational properties with Raman scattering in 1966 by Damen et al. [Phys. Rev. 142, 570 (1966)], detailed optical studies in 1954 by Mollwo [Z. Angew. Phys. 6, 257 (1954)], and its growth by chemical-vapor transport in 1970 by Galli and Coker [Appl. Phys. ...

Understanding TiO2 photocatalysis: mechanisms and materials.

Abstract: Jenny Schneider,*,† Masaya Matsuoka,‡ Masato Takeuchi,‡ Jinlong Zhang, Yu Horiuchi,‡ Masakazu Anpo,‡ and Detlef W. Bahnemann*,† †Institut fur Technische Chemie, Leibniz Universitaẗ Hannover, Callinstrasse 3, D-30167 Hannover, Germany ‡Faculty of Engineering, Osaka Prefecture University, 1 Gakuen-cho, Sakai Osaka 599-8531, Japan Key Lab for Advanced Materials and Institute of Fine Chemicals, East China University of Science and Technology, Shanghai 200237, China

Fundamentals of zinc oxide as a semiconductor

Abstract: In the past ten years we have witnessed a revival of, and subsequent rapid expansion in, the research on zinc oxide (ZnO) as a semiconductor. Being initially considered as a substrate for GaN and related alloys, the availability of high-quality large bulk single crystals, the strong luminescence demonstrated in optically pumped lasers and the prospects of gaining control over its electrical conductivity have led a large number of groups to turn their research for electronic and photonic devices to ZnO in its own right. The high electron mobility, high thermal conductivity, wide and direct band gap and large exciton binding energy make ZnO suitable for a wide range of devices, including transparent thin-film transistors, photodetectors, light-emitting diodes and laser diodes that operate in the blue and ultraviolet region of the spectrum. In spite of the recent rapid developments, controlling the electrical conductivity of ZnO has remained a major challenge. While a number of research groups have reported achieving p-type ZnO, there are still problems concerning the reproducibility of the results and the stability of the p-type conductivity. Even the cause of the commonly observed unintentional n-type conductivity in as-grown ZnO is still under debate. One approach to address these issues consists of growing high-quality single crystalline bulk and thin films in which the concentrations of impurities and intrinsic defects are controlled. In this review we discuss the status of ZnO as a semiconductor. We first discuss the growth of bulk and epitaxial films, growth conditions and their influence on the incorporation of native defects and impurities. We then present the theory of doping and native defects in ZnO based on density-functional calculations, discussing the stability and electronic structure of native point defects and impurities and their influence on the electrical conductivity and optical properties of ZnO. We pay special attention to the possible causes of the unintentional n-type conductivity, emphasize the role of impurities, critically review the current status of p-type doping and address possible routes to controlling the electrical conductivity in ZnO. Finally, we discuss band-gap engineering using MgZnO and CdZnO alloys.

Repeated temperature modulation epitaxy for p-type doping and light-emitting diode based on ZnO

Abstract: Since the successful demonstration of a blue light-emitting diode (LED)1, potential materials for making short-wavelength LEDs and diode lasers have been attracting increasing interest as the demands for display, illumination and information storage grow2,3,4. Zinc oxide has substantial advantages including large exciton binding energy, as demonstrated by efficient excitonic lasing on optical excitation5,6. Several groups have postulated the use of p-type ZnO doped with nitrogen, arsenic or phosphorus7,8,9,10, and even p–n junctions11,12,13. However, the choice of dopant and growth technique remains controversial and the reliability of p-type ZnO is still under debate14. If ZnO is ever to produce long-lasting and robust devices, the quality of epitaxial layers has to be improved as has been the protocol in other compound semiconductors15. Here we report high-quality undoped films with electron mobility exceeding that in the bulk. We have used a new technique to fabricate p-type ZnO reproducibly. Violet electroluminescence from homostructural p–i–n junctions is demonstrated at room-temperature.