Takeshi Manabe

Bio: Takeshi Manabe is an academic researcher from Osaka Prefecture University. The author has contributed to research in topics: Attenuation & Precipitation. The author has an hindex of 24, co-authored 122 publications receiving 2718 citations. Previous affiliations of Takeshi Manabe include National Institute of Information and Communications Technology & National Telecommunications and Information Administration.

A model for the complex permittivity of water at frequencies below 1 THz

Abstract: Experimental permittivity data of liquid water, compiled from the open literature, were selectively applied to support a modeling strategy. Frequencies up to 1 THz and atmospheric temperatures are covered with an expression made up by two relaxation (Debye) terms. The double-Debye model reduces to one term when the high frequency limit is set at 100 GHz, and the model can be extended to 30 THz by adding two resonance (Lorentzian) terms. The scheme was carried out by employing nonlinear least-squares fitting routines to data we considered reliable.

Effects of antenna directivity and polarization on indoor multipath propagation characteristics at 60 GHz

Abstract: In millimeter-wave indoor communications systems, the radiation patterns and polarizations of the antennas at base stations and remote terminals have a significant influence on channel characteristics. The work reported in this paper investigated the effects of the radiation patterns of the antennas at remote terminals on multipath propagation characteristics. These effects were investigated by indoor propagation measurements at 60 GHz conducted in a modern office room and by ray-tracing simulations based on geometrical optics. Multipath channel characteristics are compared in terms of impulse responses and their root-mean-square (rms) delay spreads for an omnidirectional antenna and for three directive antennas with different beam widths. From the results of measurements and ray-tracing simulations, the use of a directive antenna at the remote terminal is demonstrated to be an effective method of reducing the effects of multipath propagation. Further reduction in the multipath effects is found to be achieved by the use of circular polarization instead of linear polarization with the directive antennas.

Millimeter-wave attenuation and delay rates due to fog/cloud conditions

Abstract: Propagation properties of suspended water and ice particles which make up atmospheric haze, fog, and clouds were examined for microwave and millimeter-wave frequencies. Rates of attenuation alpha (dB/km) and delay tau (ps/km) are derived from a complex refractivity based on the Rayleigh absorption approximation of Mie's scattering theory. Key variables are particle mass content and permittivity, which depends on frequency and temperature both for liquid and ice states. Water droplet attenuation can be estimated within a restricted (10+or-10 degrees C) temperature range using a simple two-coefficient approximation. Experimental data on signal loss and phase delay caused by fog at four frequencies (50, 82, 141, and 246 GHz) over a 0.81-km line-of-sight path were found to be consistent with the model. >

Polarization dependence of multipath propagation and high-speed transmission characteristics of indoor millimeter-wave channel at 60 GHz

Abstract: Measurements of polarization dependence of multipath-propagation characteristics were conducted at 60 GHz in a room within a modern office building. Delay profiles were measured using a swept frequency method with a high time-delay resolution of 2 ns. Directions of arrival of the multipath components reflected from walls were analyzed by rotating a narrow-beam receiving antenna with an angular resolution of 5 degrees. Results of this experiment showed that multipath delayed waves due to wall reflection can be effectively suppressed by employing circular polarization instead of linear polarization. Based on this experimental result, a computer simulation was made to clarify the polarization dependence of the high-speed transmission characteristics of an indoor communications system operating at 60 GHz. >

Measurements of reflection and transmission characteristics of interior structures of office building in the 60-GHz band

Abstract: We have measured (at 57.5 GHz) the reflection and transmission coefficients of typical walls, floor, ceiling, window, and partitions and have compared the measured reflection characteristics with the reflection characteristics estimated by multilayer dielectric models. Although the positional inhomogeneity of structures gives rise to some variation from one measured position to another, these positional variabilities are not large. The overall trend of reflection coefficients calculated by multilayer dielectric models thus agrees fairly well with the trend of the measurements. We have shown that the use of circular polarization can reduce the reflection even if the interior parts of the structure have complicated structures. In addition, the shadowing effects of several types of partitions were measured. The transmission coefficients of partitions depend on the materials. The transmission losses of plywood-made partitions are found to be fairly low.

Millimeter-Wave Cellular Wireless Networks: Potentials and Challenges

Abstract: Millimeter-wave (mmW) frequencies between 30 and 300 GHz are a new frontier for cellular communication that offers the promise of orders of magnitude greater bandwidths combined with further gains via beamforming and spatial multiplexing from multielement antenna arrays. This paper surveys measurements and capacity studies to assess this technology with a focus on small cell deployments in urban environments. The conclusions are extremely encouraging; measurements in New York City at 28 and 73 GHz demonstrate that, even in an urban canyon environment, significant non-line-of-sight (NLOS) outdoor, street-level coverage is possible up to approximately 200 m from a potential low-power microcell or picocell base station. In addition, based on statistical channel models from these measurements, it is shown that mmW systems can offer more than an order of magnitude increase in capacity over current state-of-the-art 4G cellular networks at current cell densities. Cellular systems, however, will need to be significantly redesigned to fully achieve these gains. Specifically, the requirement of highly directional and adaptive transmissions, directional isolation between links, and significant possibilities of outage have strong implications on multiple access, channel structure, synchronization, and receiver design. To address these challenges, the paper discusses how various technologies including adaptive beamforming, multihop relaying, heterogeneous network architectures, and carrier aggregation can be leveraged in the mmW context.

An Overview of Signal Processing Techniques for Millimeter Wave MIMO Systems

Abstract: Communication at millimeter wave (mmWave) frequencies is defining a new era of wireless communication. The mmWave band offers higher bandwidth communication channels versus those presently used in commercial wireless systems. The applications of mmWave are immense: wireless local and personal area networks in the unlicensed band, 5G cellular systems, not to mention vehicular area networks, ad hoc networks, and wearables. Signal processing is critical for enabling the next generation of mmWave communication. Due to the use of large antenna arrays at the transmitter and receiver, combined with radio frequency and mixed signal power constraints, new multiple-input multiple-output (MIMO) communication signal processing techniques are needed. Because of the wide bandwidths, low complexity transceiver algorithms become important. There are opportunities to exploit techniques like compressed sensing for channel estimation and beamforming. This article provides an overview of signal processing challenges in mmWave wireless systems, with an emphasis on those faced by using MIMO communication at higher carrier frequencies.

Millimeter Wave Channel Modeling and Cellular Capacity Evaluation

Abstract: With the severe spectrum shortage in conventional cellular bands, millimeter wave (mmW) frequencies between 30 and 300 GHz have been attracting growing attention as a possible candidate for next-generation micro- and picocellular wireless networks. The mmW bands offer orders of magnitude greater spectrum than current cellular allocations and enable very high-dimensional antenna arrays for further gains via beamforming and spatial multiplexing. This paper uses recent real-world measurements at 28 and 73 GHz in New York, NY, USA, to derive detailed spatial statistical models of the channels and uses these models to provide a realistic assessment of mmW micro- and picocellular networks in a dense urban deployment. Statistical models are derived for key channel parameters, including the path loss, number of spatial clusters, angular dispersion, and outage. It is found that, even in highly non-line-of-sight environments, strong signals can be detected 100-200 m from potential cell sites, potentially with multiple clusters to support spatial multiplexing. Moreover, a system simulation based on the models predicts that mmW systems can offer an order of magnitude increase in capacity over current state-of-the-art 4G cellular networks with no increase in cell density from current urban deployments.

Atmospheric radiative transfer modeling: a summary of the AER codes

Abstract: The radiative transfer models developed at AER are being used extensively for a wide range of applications in the atmospheric sciences. This communication is intended to provide a coherent summary of the various radiative transfer models and associated databases publicly available from AER ( http://www.rtweb.aer.com ). Among the communities using the models are the remote sensing community (e.g. TES, IASI), the numerical weather prediction community (e.g. ECMWF, NCEP GFS, WRF, MM5), and the climate community (e.g. ECHAM5). Included in this communication is a description of the central features and recent updates for the following models: the line-by-line radiative transfer model (LBLRTM); the line file creation program (LNFL); the longwave and shortwave rapid radiative transfer models, RRTM_LW and RRTM_SW; the Monochromatic Radiative Transfer Model (MonoRTM); the MT_CKD Continuum; and the Kurucz Solar Source Function. LBLRTM and the associated line parameter database (e.g. HITRAN 2000 with 2001 updates) play a central role in the suite of models. The physics adopted for LBLRTM has been extensively analyzed in the context of closure experiments involving the evaluation of the model inputs (e.g. atmospheric state), spectral radiative measurements and the spectral model output. The rapid radiative transfer models are then developed and evaluated using the validated LBLRTM model.

Wireless Communications and Applications Above 100 GHz: Opportunities and Challenges for 6G and Beyond

Abstract: Frequencies from 100 GHz to 3 THz are promising bands for the next generation of wireless communication systems because of the wide swaths of unused and unexplored spectrum. These frequencies also offer the potential for revolutionary applications that will be made possible by new thinking, and advances in devices, circuits, software, signal processing, and systems. This paper describes many of the technical challenges and opportunities for wireless communication and sensing applications above 100 GHz, and presents a number of promising discoveries, novel approaches, and recent results that will aid in the development and implementation of the sixth generation (6G) of wireless networks, and beyond. This paper shows recent regulatory and standard body rulings that are anticipating wireless products and services above 100 GHz and illustrates the viability of wireless cognition, hyper-accurate position location, sensing, and imaging. This paper also presents approaches and results that show how long distance mobile communications will be supported to above 800 GHz since the antenna gains are able to overcome air-induced attenuation, and present methods that reduce the computational complexity and simplify the signal processing used in adaptive antenna arrays, by exploiting the Special Theory of Relativity to create a cone of silence in over-sampled antenna arrays that improve performance for digital phased array antennas. Also, new results that give insights into power efficient beam steering algorithms, and new propagation and partition loss models above 100 GHz are given, and promising imaging, array processing, and position location results are presented. The implementation of spatial consistency at THz frequencies, an important component of channel modeling that considers minute changes and correlations over space, is also discussed. This paper offers the first in-depth look at the vast applications of THz wireless products and applications and provides approaches for how to reduce power and increase performance across several problem domains, giving early evidence that THz techniques are compelling and available for future wireless communications.