Tatsuo Amitani

Bio: Tatsuo Amitani is an academic researcher. The author has contributed to research in topics: Diesel engine. The author has an hindex of 1, co-authored 1 publications receiving 259 citations.

Studies on the Penetration of Fuel Spray in a Diesel Engine

Abstract: Regarding the penetrating distance of fuel spray in a diesel engine, the old theory dealing with the motion of a fuel droplet in still air is recognized not to coincide with the actual phenomenon in a diesel engine because of the extremely small size of atomized fuel droplets and the very high density of gas in cylinder. In this paper, the characteristics of spray penetration are discussed from the viewpoint of momentum theory based on the idea that the air induced into a fuel jet stream makes a kind of mixed gas together with fuel droplets. According to the results of experiment, the authors confirmed that the theory was satisfactory, that there existed the simple relations among several dimensionless numbers which indicate the effect of various factors on the spray penetration, that there is a close relationship between the spray cone angle and penetration, and others.

Effects of Gas Density and Vaporization on Penetration and Dispersion of Diesel Sprays

Abstract: Ambient gas density and fuel vaporization effects on the penetration and dispersion of diesel sprays were examined over a gas density range spanning nearly two order of magnitude. This range included gas densities more than a factor of two higher than top-dead-center conditions in current technology heavy-duty diesel engines. The results show that ambient gas density has a significantly larger effect on spray penetration and a smaller effect on spray dispersion than has been previously reported. The increased dependence of penetration on gas density is shown to be the result of gas density effects on dispersion. In addition, the results show that vaporization decreases penetration and dispersion by as much as 20% relative to non-vaporizing sprays; however, the effects of vaporization decrease with increasing gas density. Characteristic penetration time and length scales are presented that include a dispersion term that accounts for the increased dependence of penetration on ambient density. These penetration time and length scales collapse the penetration data obtained over the entire range of conditions examined in the experiment into two distinct non-dimensional penetration curves: one for the non-vaporizing conditions and one for the vaporizing conditions. Comparison of the two nondimensional penetration curves to a theoretical penetration correlation for non-vaporizing sprays helped isolate and explain the effects of droplets and vaporization on penetration. The theoretical penetration correlation was derived using the penetration time and length scales and simple model for a non-vaporizing spray that has been previously presented in the literature. The correlation is in good agreement with the non-vaporizing data from this experiment and other commonly quoted penetration data sets. It also provides a potential explanation for much of scatter in the penetration predicted by various correlations in the literature.

Multi-Zone DI Diesel Spray Combustion Model for Cycle Simulation Studies of Engine Performance and Emissions

Abstract: A quasi -dimensional, multi-zone, direct injection (DI) diesel combustion model has been developed and implemented in a full cycle simulation of a turbocharged engine. The combustion model accounts for transient fuel spray evolution, fuel-air mixing, ignition, combustion and NO and soot pollutant formation. In the model, the fuel spray is divided into a number of zones, which are treated as open systems. While mass and energy equations are solved for each zone, a simplified momentum conservation equation is used to ca lculate the amount of air entrained into each zone. Details of the DI spray, combustion model and its implementation into the cycle simulation of Assanis and Heywood [1] are described in this paper. The model is validated with experimental data obtained in a constant volume chamber and engines. First, predictions of spray penetration and spray angle are validated against measurements in a pressurized constant volume chamber. Subsequently, predictions of heat release rate, as well as NO and soot emissions are compared with experimental data obtained from representative heavy-duty, turbocharged diesel engines. It is demonstrated that the model can predict the rate of heat release and engine performance with high fidelity. However, additional effort is require d to enhance the fidelity of NO and soot predictions across a wide range of operating conditions.