Computational modelling of impact damage in brittle materials

Electrical discharge machining (EDM) is a well-established machining option for manufacturing geometrically complex or hard material parts that are extremely difficult-to-machine by conventional machining processes. The non-contact machining technique has been continuously evolving from a mere tool and die making process to a micro-scale application machining alternative attracting a significant amount of research interests. In recent years, EDM researchers have explored a number of ways to improve the sparking efficiency including some unique experimental concepts that depart from the EDM traditional sparking phenomenon. Despite a range of different approaches, this new research shares the same objectives of achieving more efficient metal removal coupled with a reduction in tool wear and improved surface quality. This paper reviews the research work carried out from the inception to the development of die-sinking EDM within the past decade. It reports on the EDM research relating to improving performance measures, optimising the process variables, monitoring and control the sparking process, simplifying the electrode design and manufacture. A range of EDM applications are highlighted together with the development of hybrid machining processes. The final part of the paper discusses these developments and outlines the trends for future EDM research.

http://zclient.persiangig.com/ScienceDirect/M02.pdf

State of the art electrical discharge machining (EDM)

Introduction Metal forming process Analysis and technology in metal forming Plasticity and viscoplasticity Methods of analysis The finite element method (1) The finite element method (2) Plane-strain problems Axisymmetric isothermal forging Steady state processes of extrusion and drawing Sheet metal forming Thermo-viscoplastic analysis Compaction and forging of porous metals Three dimensional problems Preform design in metal forming Solid formulation, comparison of two formulations, and concluding remarks Index.

/pdf/metal-forming-and-the-finite-element-method-5ev6lca5h5.pdf

Metal Forming and the Finite-Element Method

http://digitalknowledge.cput.ac.za/bitstream/11189/4942/3/Makinde_Oluwole_D_Aziz_A_Eng_2011.pdf

Boundary layer flow of a nanofluid past a stretching sheet with a convective boundary condition

An account is given of the development of the idea of a yield stress for solids, soft solids and structured liquids from the beginning of this century to the present time. Originally, it was accepted that the yield stress of a solid was essentially the point at which, when the applied stress was increased, the deforming solid first began to show liquid-like behaviour, i.e. continual deformation. In the same way, the yield stress of a structured liquid was originally seen as the point at which, when decreasing the applied stress, solid-like behaviour was first noticed, i.e. no continual deformation. However as time went on, and experimental capabilities increased, it became clear, first for solids and lately for soft solids and structured liquids, that although there is usually a small range of stress over which the mechanical properties change dramatically (an apparent yield stress), these materials nevertheless show slow but continual steady deformation when stressed for a long time below this level, having shown an initial linear elastic response to the applied stress. At the lowest stresses, this creep behaviour for solids, soft solids and structured liquids can be described by a Newtonian-plateau viscosity. As the stress is increased the flow behaviour usually changes into a power-law dependence of steady-state shear rate on shear stress. For structured liquids and soft solids, this behaviour generally gives way to Newtonian behaviour at the highest stresses. For structured liquids this transition from very high (creep) viscosity (>106 Pa.s) to mobile liquid (

The yield stress—a review or ‘παντα ρει’—everything flows?

Finite element analysis of tube hydroforming processes in a rectangular die

In the fabrication industry, one of the critical challenges is to maintain close geometric tolerances in finished products, particularly in the air bending process. In many cases, this problem is related to springback and plastic elongation/compression of the sheet, as it undergoes deformation in bending. Springback refers to the elastic recovery of the bent sheet after unloading, whereas bend allowance refers to the elongation of the sheet during bending. Both factors, if not predicted properly, may lead to dimensional inaccuracies in the finished product and cause difficulties in the assembly. Therefore, it is essential to predict springback and bend allowance in order to obtain the final desired geometry. A new analytical model was developed to predict springback and bend allowance simultaneously in air bending, and a user-friendly computer program, BEND (Version 3.0), was developed. Results obtained from the BEND program were compared to other analytical predictions and experimental results available in the literature. It was concluded that the proposed analytical model and the computer program predicted bend allowance and springback within acceptable accuracy.

Taylan Altan

Papers

Finite element analysis of tube hydroforming processes in a rectangular die

Prediction of bend allowance and springback in air bending

Forming-sequence design for multistage cold forging

Improvement of hem quality by optimizing flanging and pre-hemming operations using computer aided die design

Estimation of plastic deformation and abrasive wear in warm forging dies