scispace - formally typeset
Search or ask a question
Author

Tengfei Zhou

Other affiliations: University of Wollongong, University UCINF, Nankai University  ...read more
Bio: Tengfei Zhou is an academic researcher from Anhui University. The author has contributed to research in topics: Anode & Graphene. The author has an hindex of 37, co-authored 82 publications receiving 5439 citations. Previous affiliations of Tengfei Zhou include University of Wollongong & University UCINF.


Papers
More filters
Journal ArticleDOI
TL;DR: Ultrafine SnS/SnO2 heterostructures were successfully fabricated and showed enhanced charge-transfer capability and the mobility enhancement is attributed to the interface effect of heterostructure, which induces an electric field within the nanocrystals, giving them much lower ion-diffusion resistance and facilitating interfacial electron transport.
Abstract: Constructing heterostructures can endow materials with fascinating performance in high-speed electronics, optoelectronics, and other applications owing to the built-in charge-transfer driving force, which is of benefit to the specific charge-transfer kinetics. Rational design and controllable synthesis of nano-heterostructure anode materials with high-rate performance, however, still remains a great challenge. Herein, ultrafine SnS/SnO2 heterostructures were successfully fabricated and showed enhanced charge-transfer capability. The mobility enhancement is attributed to the interface effect of heterostructures, which induces an electric field within the nanocrystals, giving them much lower ion-diffusion resistance and facilitating interfacial electron transport.

622 citations

Journal ArticleDOI
14 Jul 2014-ACS Nano
TL;DR: The first report on a SnS@graphene architecture for application as a sodium-ion battery anode, which is built from two-dimensional SnS and graphene nanosheets as complementary building blocks, finds the performance was found to be much better than those of most reported anode materials for Na-ion batteries.
Abstract: Structural phase transitions can be used to alter the properties of a material without adding any additional elements and are therefore of significant technological value. It was found that the hexagonal-SnS2 phase can be transformed into the orthorhombic-SnS phase after an annealing step in an argon atmosphere, and the thus transformed SnS shows enhanced sodium-ion storage performance over that of the SnS2, which is attributed to its structural advantages. Here, we provide the first report on a SnS@graphene architecture for application as a sodium-ion battery anode, which is built from two-dimensional SnS and graphene nanosheets as complementary building blocks. The as-prepared SnS@graphene hybrid nanostructured composite delivers an excellent specific capacity of 940 mAh g–1and impressive rate capability of 492 and 308 mAh g–1 after 250 cycles at the current densities of 810 and 7290 mA g–1, respectively. The performance was found to be much better than those of most reported anode materials for Na-ion ...

567 citations

Journal ArticleDOI
TL;DR: In this article, atomically thin Bi2 MoO6 sheets are acquired that exhibit remarkable high-rate cycling performance in Li-ion batteries, which can be attributed to the interlayer coupling effect, as well as the 2D configuration and intrinsic structural stability.
Abstract: Ultrathin 2D materials can offer promising opportunities for exploring advanced energy storage systems, with satisfactory electrochemical performance. Engineering atomic interfaces by stacking 2D crystals holds huge potential for tuning material properties at the atomic level, owing to the strong layer-layer interactions, enabling unprecedented physical properties. In this work, atomically thin Bi2 MoO6 sheets are acquired that exhibit remarkable high-rate cycling performance in Li-ion batteries, which can be ascribed to the interlayer coupling effect, as well as the 2D configuration and intrinsic structural stability. The unbalanced charge distribution occurs within the crystal and induces built-in electric fields, significantly boosting lithium ion transfer dynamics, while the extra charge transport channels generated on the open surfaces further promote charge transport. The in situ synchrotron X-ray powder diffraction results confirm the material's excellent structural stability. This work provides some insights for designing high-performance electrode materials for energy storage by manipulating the interface interaction and electronic structure.

468 citations

Journal ArticleDOI
TL;DR: Bin Cao, Qing Zhang, Huan Liu, Bin Xu, Shilin Zhang, Tengfei Zhou, Jianfeng Mao, Wei Kong Pang, Zaiping Guo, Ang Li, Jisheng Zhou, Xiaohong Chen, and Huaihe Song as mentioned in this paper
Abstract: Bin Cao, Qing Zhang, Huan Liu, Bin Xu, Shilin Zhang, Tengfei Zhou, Jianfeng Mao, Wei Kong Pang, Zaiping Guo, Ang Li, Jisheng Zhou, Xiaohong Chen, and Huaihe Song

406 citations

Journal ArticleDOI
TL;DR: In this article, a cobalt sulfide and graphene (CoS@G) composite was proposed as anode electrode for PIBs for the first time, and the composite features interconnect quantum dots of CoS nanoclusters uniformly anchored on graphene nanosheets.
Abstract: Potassium-ion batteries (PIBs) are a promising alternative to lithium-ion batteries because potassium is an abundant natural resource. To date, PIBs are in the early stages of exploration and only a few anode materials have been investigated. This study reports a cobalt sulfide and graphene (CoS@G) composite as anode electrode for PIBs for the first time. The composite features interconnect quantum dots of CoS nanoclusters uniformly anchored on graphene nanosheets. The coexistence of CoS quantum dot nanoclusters and graphene nanosheets endows the composite with large surface area, highly conductive network, robust structural stability, and excellent electrochemical energy storage performance. An unprecedented capacity of 310.8 mA h g−1 at 500 mA g−1 is obtained after 100 cycles, with a rate capability better than an equivalent sodium-ion batteries (SIBs). This work provides the evidence that PIBs can be a promising alternative to SIBs, especially at high charge–discharge rates. The development of the CoS@G anode material also provides the basis of expanding the library of suitable anode materials for PIBs.

383 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: The unique advances on ultrathin 2D nanomaterials are introduced, followed by the description of their composition and crystal structures, and the assortments of their synthetic methods are summarized.
Abstract: Since the discovery of mechanically exfoliated graphene in 2004, research on ultrathin two-dimensional (2D) nanomaterials has grown exponentially in the fields of condensed matter physics, material science, chemistry, and nanotechnology. Highlighting their compelling physical, chemical, electronic, and optical properties, as well as their various potential applications, in this Review, we summarize the state-of-art progress on the ultrathin 2D nanomaterials with a particular emphasis on their recent advances. First, we introduce the unique advances on ultrathin 2D nanomaterials, followed by the description of their composition and crystal structures. The assortments of their synthetic methods are then summarized, including insights on their advantages and limitations, alongside some recommendations on suitable characterization techniques. We also discuss in detail the utilization of these ultrathin 2D nanomaterials for wide ranges of potential applications among the electronics/optoelectronics, electrocat...

3,628 citations

Journal ArticleDOI
TL;DR: Current research on materials is summarized and discussed and future directions for SIBs are proposed to provide important insights into scientific and practical issues in the development of S IBs.
Abstract: Energy production and storage technologies have attracted a great deal of attention for day-to-day applications. In recent decades, advances in lithium-ion battery (LIB) technology have improved living conditions around the globe. LIBs are used in most mobile electronic devices as well as in zero-emission electronic vehicles. However, there are increasing concerns regarding load leveling of renewable energy sources and the smart grid as well as the sustainability of lithium sources due to their limited availability and consequent expected price increase. Therefore, whether LIBs alone can satisfy the rising demand for small- and/or mid-to-large-format energy storage applications remains unclear. To mitigate these issues, recent research has focused on alternative energy storage systems. Sodium-ion batteries (SIBs) are considered as the best candidate power sources because sodium is widely available and exhibits similar chemistry to that of LIBs; therefore, SIBs are promising next-generation alternatives. Recently, sodiated layer transition metal oxides, phosphates and organic compounds have been introduced as cathode materials for SIBs. Simultaneously, recent developments have been facilitated by the use of select carbonaceous materials, transition metal oxides (or sulfides), and intermetallic and organic compounds as anodes for SIBs. Apart from electrode materials, suitable electrolytes, additives, and binders are equally important for the development of practical SIBs. Despite developments in electrode materials and other components, there remain several challenges, including cell design and electrode balancing, in the application of sodium ion cells. In this article, we summarize and discuss current research on materials and propose future directions for SIBs. This will provide important insights into scientific and practical issues in the development of SIBs.

3,009 citations

Posted Content
TL;DR: The two-step solution-phase reactions to form hybrid materials of Mn(3)O(4) nanoparticles on reduced graphene oxide (RGO) sheets for lithium ion battery applications should offer a new technique for the design and synthesis of battery electrodes based on highly insulating materials.
Abstract: We developed two-step solution-phase reactions to form hybrid materials of Mn3O4 nanoparticles on reduced graphene oxide (RGO) sheets for lithium ion battery applications. Mn3O4 nanoparticles grown selectively on RGO sheets over free particle growth in solution allowed for the electrically insulating Mn3O4 nanoparticles wired up to a current collector through the underlying conducting graphene network. The Mn3O4 nanoparticles formed on RGO show a high specific capacity up to ~900mAh/g near its theoretical capacity with good rate capability and cycling stability, owing to the intimate interactions between the graphene substrates and the Mn3O4 nanoparticles grown atop. The Mn3O4/RGO hybrid could be a promising candidate material for high-capacity, low-cost, and environmentally friendly anode for lithium ion batteries. Our growth-on-graphene approach should offer a new technique for design and synthesis of battery electrodes based on highly insulating materials.

1,587 citations

Journal ArticleDOI
TL;DR: In this paper, the authors address the nature of these height fluctuations by means of straightforward atomistic Monte Carlo simulations based on a very accurate many-body interatomic potential for carbon and find that ripples spontaneously appear due to thermal fluctuations with a size distribution peaked around 70 \AA which is compatible with experimental findings (50-100 \AA) but not with the current understanding of flexible membranes.
Abstract: The stability of two-dimensional (2D) layers and membranes is subject of a long standing theoretical debate. According to the so called Mermin-Wagner theorem, long wavelength fluctuations destroy the long-range order for 2D crystals. Similarly, 2D membranes embedded in a 3D space have a tendency to be crumpled. These dangerous fluctuations can, however, be suppressed by anharmonic coupling between bending and stretching modes making that a two-dimensional membrane can exist but should present strong height fluctuations. The discovery of graphene, the first truly 2D crystal and the recent experimental observation of ripples in freely hanging graphene makes these issues especially important. Beside the academic interest, understanding the mechanisms of stability of graphene is crucial for understanding electronic transport in this material that is attracting so much interest for its unusual Dirac spectrum and electronic properties. Here we address the nature of these height fluctuations by means of straightforward atomistic Monte Carlo simulations based on a very accurate many-body interatomic potential for carbon. We find that ripples spontaneously appear due to thermal fluctuations with a size distribution peaked around 70 \AA which is compatible with experimental findings (50-100 \AA) but not with the current understanding of stability of flexible membranes. This unexpected result seems to be due to the multiplicity of chemical bonding in carbon.

1,367 citations

Journal ArticleDOI
TL;DR: The fundamental relationships between electronic structure, adsorption energy, and apparent activity for a wide variety of 2D electrocatalysts are described with the goal of providing a better understanding of these emerging nanomaterials at the atomic level.
Abstract: Over the past few decades, the design and development of advanced electrocatalysts for efficient energy conversion technologies have been subjects of extensive study. With the discovery of graphene, two-dimensional (2D) nanomaterials have emerged as some of the most promising candidates for heterogeneous electrocatalysts due to their unique physical, chemical, and electronic properties. Here, we review 2D-nanomaterial-based electrocatalysts for selected electrocatalytic processes. We first discuss the unique advances in 2D electrocatalysts based on different compositions and functions followed by specific design principles. Following this overview, we discuss various 2D electrocatalysts for electrocatalytic processes involved in the water cycle, carbon cycle, and nitrogen cycle from their fundamental conception to their functional application. We place a significant emphasis on different engineering strategies for 2D nanomaterials and the influence these strategies have on intrinsic material performance, ...

1,363 citations