Teresa Emery

Bio: Teresa Emery is an academic researcher from United States Department of the Navy. The author has contributed to research in topics: Photonics & Nanophotonics. The author has an hindex of 5, co-authored 18 publications receiving 588 citations. Previous affiliations of Teresa Emery include California Institute of Technology.

Nanofluidic tuning of photonic crystal circuits

Abstract: By integrating soft-lithography-based nanofluidics with silicon nanophotonics, we demonstrate dynamic, liquid-based addressing and high Delta n/n(~0.1) refractive index modulation of individual features within photonic structures at subwavelength length scales. We show ultracompact tunable spectral filtering through nanofluidic targeting of a single row of holes within a planar photonic crystal. We accomplished this with an optofluidic integration architecture comprising a nanophotonic layer, a nanofluidic delivery structure, and a microfluidic control engine. Variants of this technique could enable dynamic reconfiguration of photonic circuits, selective introduction of optical nonlinearities, or delivery of single molecules into resonant cavities for biodetection.

Single Mode Optofluidic Distributed Feedback Dye Laser

Abstract: Single frequency lasing from organic dye solutions on a monolithic poly(dimethylsiloxane) (PDMS) elastomer chip is demonstrated. The laser cavity consists of a single mode liquid core/PDMS cladding channel waveguide and a phase shifted 15th order distributed feedback (DFB) structure. A 1mM solution of Rhodamine 6G in a methanol and ethylene glycol mixture was used as the gain medium. Using 6 nanosecond 532nm Nd:YAG laser pulses as the pump light, we achieved threshold pump fluence of ~0.8mJ/cm2 and single-mode operation at pump levels up to ten times the threshold. This microfabricated dye laser provides a compact and inexpensive coherent light source for microfluidics and integrated optics covering from near UV to near IR spectral region.

Single mode optofluidic distributed feedback dye laser

Abstract: Single frequency lasing from organic dye solutions on a monolithic poly(dimethylsiloxane) (PDMS) elastomer chip is demonstrated. The laser cavity consists of a single mode liquid core/PDMS cladding channel waveguide and a phase shifted 15th order distributed feedback (DFB) structure. A 1mM solution of Rhodamine 6G in a methanol and ethylene glycol mixture was used as the gain medium. Using 6 nanosecond 532nm Nd:YAG laser pulses as the pump light, we achieved threshold pump fluence of ~0.8mJ/cm(2) and single-mode operation at pump levels up to ten times the threshold. This microfabricated dye laser provides a compact and inexpensive coherent light source for microfluidics and integrated optics covering from near UV to near IR spectral region.

Nanowire-based superconducting electrostrictive device

Abstract: A Josephson junction device and methods for manufacture can include an untwinned YBa2Cu3Ox nanowire having crystallographic a- and b-axes The nanowire can be established from YBa2Cu3Ox film (60≤x≤70) using a photolithography process, followed by an ion milling process, to yield the YBa2Cu3Ox nanowire The crystallographic b-axis of the nanowire can be parallel to the long dimension of the nanowire First and second gate structures can be placed on opposite sides of the nanowire across from each other, to establish first and second microgaps A gate voltage can be selectively applied across the first and said second gate structures, which can further establish a selective electric field across the first and second microgaps The electric field can be parallel to the nanowire crystallographic a-axis, to selectively cause an at will Josephson junction effect

Preparation of novel HTS films and tunnel junctions for advanced C3I sensor applications

Abstract: Research into the development of advanced RF electronics and devices having high-Temperature Superconducting (HTS) circuitry is being carried out in the Cryogenic Exploitation of RF (CERF) laboratory at SPAWAR Systems Center (SSC) - Pacific. Recently, we have developed a novel annealing process wherein a film of YBa2Cu3Ox is produced having a gradient of oxygen composition along a given direction which we refer to as YBa2Cu3O∇x. Such samples are intended for rapid experimental investigation of the evolution of electronic properties within the compound and in combination with structurally compatible functional oxide materials as integrated sensor devices. We present here an investigation as to the extent to which local oxygen content affects the ion milling process in the formation of Josephson junctions in the HTS compound YBa2Cu3O∇x. We find an abrupt transition in the profile and depth of ion milled trenches at oxygen concentrations at and below the well ordered oxygen level, O6.72. The method described here shows good potential for use in the fabrication of large numbers of uniform Josephson junctions in films of YBa2Cu3Ox, as either a complementary processing tool for grain boundary, step edge, or ion damaged formed JJs, or as a stand alone method for producing nano-bridge JJ’s. © (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.

疟原虫var基因转换速率变化导致抗原变异[英]／Paul H, Robert P, Christodoulou Z, et al//Proc Natl Acad Sci U S A

Abstract: 抗原变异可使得多种致病微生物易于逃避宿主免疫应答。表达在感染红细胞表面的恶性疟原虫红细胞表面蛋白1（PfPMP1）与感染红细胞、内皮细胞、树突状细胞以及胎盘的单个或多个受体作用，在黏附及免疫逃避中起关键的作用。每个单倍体基因组var基因家族编码约60种成员，通过启动转录不同的var基因变异体为抗原变异提供了分子基础。

Handbook of Chemistry and Physics

Abstract: There is a special reason for reviewing this book at this time: it is the 50th edition of a compendium that is known and used frequently in most chemical and physical laboratories in many parts of the world. Surely, a publication that has been published for 56 years, withstanding the vagaries of science in this century, must have had something to offer. There is another reason: while the book is a standard fixture in most chemical and physical laboratories, including those in medical centers, it is not as frequently seen in the laboratories of physician's offices (those either in solo or group practice). I believe that the Handbook can be useful in those laboratories. One of the reasons, among others, is that the various basic items of information it offers may be helpful in new tests, either physical or chemical, which are continuously being published. The basic information may relate

Developing optofluidic technology through the fusion of microfluidics and optics

Abstract: We describe devices in which optics and fluidics are used synergistically to synthesize novel functionalities. Fluidic replacement or modification leads to reconfigurable optical systems, whereas the implementation of optics through the microfluidic toolkit gives highly compact and integrated devices. We categorize optofluidics according to three broad categories of interactions: fluid–solid interfaces, purely fluidic interfaces and colloidal suspensions. We describe examples of optofluidic devices in each category.

Micromachining a miniaturized capillary electrophoresis-based chemical analysis system on a chip

Abstract: Micromachining technology was used to prepare chemical analysis systems on glass chips (1 centimeter by 2 centimeters or larger) that utilize electroosmotic pumping to drive fluid flow and electrophoretic separation to distinguish sample components. Capillaries 1 to 10 centimeters long etched in the glass (cross section, 10 micrometers by 30 micrometers) allow for capillary electrophoresis-based separations of amino acids with up to 75,000 theoretical plates in about 15 seconds, and separations of about 600 plates can be effected within 4 seconds. Sample treatment steps within a manifold of intersecting capillaries were demonstrated for a simple sample dilution process. Manipulation of the applied voltages controlled the directions of fluid flow within the manifold. The principles demonstrated in this study can be used to develop a miniaturized system for sample handling and separation with no moving parts.

Integrated optofluidics: A new river of light

Abstract: The realization of miniaturized optofluidic platforms offers potential for achieving more functional and more compact devices. Such integrated systems bring fluid and light together and exploit their microscale interaction for a large variety of applications. The high sensitivity of compact microphotonic devices can generate effective microfluidic sensors, with integration capabilities. By turning the technology around, the exploitation of fluid properties holds the promise of highly flexible, tunable or reconfigurable microphotonic devices. We overview some of the exciting developments so far.