Thanasis Triantafillou

Bio: Thanasis Triantafillou is an academic researcher from University of Patras. The author has contributed to research in topics: Masonry & Fibre-reinforced plastic. The author has an hindex of 53, co-authored 186 publications receiving 12573 citations. Previous affiliations of Thanasis Triantafillou include RWTH Aachen University & University of Basilicata.

Fiber-Reinforced Polymer Composites for Construction—State-of-the-Art Review

Abstract: A concise state-of-the-art survey of fiber-reinforced polymer (also known as fiber-reinforced plastic) composites for construction applications in civil engineering is presented. The paper is organized into separate sections on structural shapes, bridge decks, internal reinforcements, externally bonded reinforcements, and standards and codes. Each section includes a historical review, the current state of the art, and future challenges.

Fiber-Reinforced Polymer Composites for Construction—State-of-the-Art Review

Abstract: A concise state-of-the-art survey of fiber-reinforced polymer (also known as fiber-reinforced plastic) composites for construction applications in civil engineering is presented. The paper is organized into separate sections on structural shapes, bridge decks, internal reinforcements, externally bonded reinforcements, and standards and codes. Each section includes a historical review, the current state of the art, and future challenges.

Shear Strengthening of Reinforced Concrete Beams Using Epoxy-Bonded FRP Composites

Abstract: The paper deals with the application of fiber reinforced polymer (FRP) laminates or fabrics as shear strengthening materials for reinforced concrete beams. The study aims at increasing the experimental database on shear strengthening of concrete using composites and, most importantly, developing an analytical model for the design of such members within the framework of modern code formats, based on ultimate limit states. The experimental part of the study involved testing of eleven concrete beams, strengthened in shear with carbon FRP at various area fractions and fiber configurations, while the analytical part resulted in a model for the contribution of FRP to shear capacity in analogy with steel stirrups, with an effective FRP strain that decreases with increasing FRP axial rigidity. It is shown that the effectiveness of the technique increases almost linearly with the FRP axial rigidity and reaches a maximum, beyond which it varies very little.

Textile reinforced mortar (trm) versus frp as strengthening material of urm walls: out-of-plane cyclic loading

Abstract: In this study the application of a new structural material, namely textile-reinforced mortar (TRM), as a means of increasing the load carrying capacity and deformability of unreinforced masonry walls subjected to cyclic in-plane loading is experimentally investigated. The application of externally bonded TRM is considered in this work as an alternative method to the application of fiber-reinforced polymers (FRP). Hence, the effectiveness of TRM overlays is evaluated in comparison to the one provided by FRPs. Medium-scale tests were carried out on 22 masonry walls subjected to in-plane cyclic loading. Three types of specimens were used: (a) shear walls; (b) beam-columns; and (c) beams. The parameters under investigation included the matrix material (mortar versus resin), the number of textile layers and the compressive stress level applied to shear walls and beam-columns. Compared with their resin-impregnated counterparts, mortar-impregnated textiles may result in generally lower effectiveness in terms of strength, but in much higher in terms of deformability. From the results obtained in this study it is believed that TRMs hold strong promise as a solution for the structural upgrading of masonry structures under in-plane loading.

Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures

Abstract: *Co-chairs of the subcommittee that prepared this document. Note: The committee acknowledges the contribution of associate member Paul Kelley. ACI encourages the development and appropriate use of new and emerging technologies through the publication of the Emerging Technology Series. This series presents information and recommendations based on available test data, technical reports, limited experience with field applications, and the opinions of committee members. The presented information and recommendations, and their basis, may be less fully developed and tested than those for more mature technologies. This report identifies areas in which information is believed to be less fully developed, and describes research needs. The professional using this document should understand the limitations of this document and exercise judgment as to the appropriate application of this emerging technology.

Fiber-Reinforced Polymer Composites for Construction—State-of-the-Art Review

Abstract: A concise state-of-the-art survey of fiber-reinforced polymer (also known as fiber-reinforced plastic) composites for construction applications in civil engineering is presented. The paper is organized into separate sections on structural shapes, bridge decks, internal reinforcements, externally bonded reinforcements, and standards and codes. Each section includes a historical review, the current state of the art, and future challenges.

Fiber-Reinforced Polymer Composites for Construction—State-of-the-Art Review

Abstract: A concise state-of-the-art survey of fiber-reinforced polymer (also known as fiber-reinforced plastic) composites for construction applications in civil engineering is presented. The paper is organized into separate sections on structural shapes, bridge decks, internal reinforcements, externally bonded reinforcements, and standards and codes. Each section includes a historical review, the current state of the art, and future challenges.

Isotropic constitutive models for metallic foams

Abstract: The yield behaviour of two aluminium alloy foams (Alporas and Duocel) has been investigated for a range of axisymmetric compressive stress states. The initial yield surface has been measured, and the evolution of the yield surface has been explored for uniaxial and hydrostatic stress paths. It is found that the hydrostatic yield strength is of similar magnitude to the uniaxial yield strength. The yield surfaces are of quadratic shape in the stress space of mean stress versus effective stress, and evolve without corner formation. Two phenomenological isotropic constitutive models for the plastic behaviour are proposed. The first is based on a geometrically self-similar yield surface while the second is more complex and allows for a change in shape of the yield surface due to differential hardening along the hydrostatic and deviatoric axes. Good agreement is observed between the experimentally measured stress versus strain responses and the predictions of the models.

Anchorage strength models for FRP and steel plates bonded to concrete

Abstract: External bonding of steel plates has been used to strengthen deficient reinforced-concrete structures since the 1960s. In recent years, fiber-reinforced polymer (FRP) plates have been increasingly used to replace steel plates due to their superior properties. A key issue in the design of an effective retrofitting solution using externally bonded plates is the end anchorage strength. This paper first presents a review of current anchorage strength models for both FRP-to-concrete and steel-to-concrete bonded joints under shear. These models are then assessed with experimental data collected from the literature, revealing the deficiencies of all existing models. Finally, a new simple and rational model is proposed based on an existing fracture mechanics analysis and experimental observations. This new model not only matches experimental observations of bond strength closely, but also correctly predicts the effective bond length. The new model is thus suitable for practical application in the design of FRP-to-concrete as well as steel-to-concrete bonded joints.