Thierry Leichle

Bio: Thierry Leichle is an academic researcher from Georgia Institute of Technology. The author has contributed to research in topics: Nanoelectromechanical systems & Silicon. The author has an hindex of 21, co-authored 90 publications receiving 1156 citations. Previous affiliations of Thierry Leichle include University of Toulouse & Academia Sinica.

Current Switching Coupled to Molecular Spin-States in Large-Area Junctions.

Abstract: The fabrication of large-area vertical junctions with a molecular spin-crossover complex displaying concerted changes of spin degrees of freedom and charge-transport properties is reported. Fabricated devices allow spin-state switching in the spin-crossover layer to be triggered and probed by optical means, while detecting associated changes in electrical resistance in the junctions.

Biosensors and tools for surface functionalization from the macro- to the nanoscale: The way forward

Abstract: Most of review articles or even books dedicated to biosensing issues are organized by the generally admitted scheme of a biosensor. Subsequently, biological receptors, modified surfaces (and ways to specifically modify those surfaces using established biological and/or chemical recipes), and transduction techniques are thoroughly addressed in this precise order. In this review, we deliberately decided to break the conventional way of providing biosensing review by uniquely addressing biomolecules’ immobilization methods onto a solid surface and biosensing-related transduction techniques. The aim of this review is to provide a contemporary snapshot of the biosensing landscape without neglecting the seminal references or products where needed. The main guiding line of the review is the downscaling (from the macro- to the nanoscale) of biosensors and their respective most known applications. To conclude, a brief overview of the most popularized nanodevices applied to biology is given before attempting to comment on biosensors’ comparison criteria in terms of targeted applications.

Complete Set of Elastic Moduli of a Spin-Crossover Solid: Spin-State Dependence and Mechanical Actuation.

Abstract: Molecular spin crossover complexes are promising candidates for mechanical actuation purposes. The relationships between their crystal structure and mechanical properties remain, however, not well understood. In this study, combining high pressure synchrotron X-ray diffraction, nuclear inelastic scattering, and micromechanical measurements, we assessed the effective macroscopic bulk modulus (B = 11.5 ± 1.5 GPa), Young’s modulus (Y = 10.9 ± 1.0 GPa), and Poisson’s ratio (ν = 0.34 ± 0.04) of the spin crossover complex [FeII(HB(tz)3)2] (tz = 1,2,4-triazol-1-yl). Crystal structure analysis revealed a pronounced anisotropy of the lattice compressibility, which was correlated with the difference in spacing between the molecules as well as by the distribution of the stiffest C–H···N interactions in different crystallographic directions. Switching the molecules from the low spin to the high spin state leads to a remarkable drop of the Young’s modulus to 7.1 ± 0.5 GPa both in bulk and thin film samples. The result...

A Bistable Microelectromechanical System Actuated by Spin-Crossover Molecules

Abstract: We report on a bistable MEMS device actuated by spin-crossover molecules. The device consists of a freestanding silicon microcantilever with an integrated piezoresistive detection system, which was coated with a 140 nm thick film of the [Fe(HB(tz)3)2] (tz=1,2,4-triazol-1-yl) molecular spin-crossover complex. Switching from the low-spin to the high-spin state of the ferrous ions at 338 K led to a reversible upward bending of the cantilever in agreement with the change in the lattice parameters of the complex. The strong mechanical coupling was also evidenced by the decrease of approximately 66 Hz in the resonance frequency in the high-spin state as well as by the drop in the quality factor around the spin transition.

Micromachining a miniaturized capillary electrophoresis-based chemical analysis system on a chip

Abstract: Micromachining technology was used to prepare chemical analysis systems on glass chips (1 centimeter by 2 centimeters or larger) that utilize electroosmotic pumping to drive fluid flow and electrophoretic separation to distinguish sample components. Capillaries 1 to 10 centimeters long etched in the glass (cross section, 10 micrometers by 30 micrometers) allow for capillary electrophoresis-based separations of amino acids with up to 75,000 theoretical plates in about 15 seconds, and separations of about 600 plates can be effected within 4 seconds. Sample treatment steps within a manifold of intersecting capillaries were demonstrated for a simple sample dilution process. Manipulation of the applied voltages controlled the directions of fluid flow within the manifold. The principles demonstrated in this study can be used to develop a miniaturized system for sample handling and separation with no moving parts.

Lab-on-chip technologies: making a microfluidic network and coupling it into a complete microsystem : a review

Abstract: Microfluidics is an emerging field that has given rise to a large number of scientific and technological developments over the last few years. This review reports on the use of various materials, such as silicon, glass and polymers, and their related technologies for the manufacturing of simple microchannels and complex systems. It also presents the main application fields concerned with the different technologies and the most significant results reported by academic and industrial teams. Finally, it demonstrates the advantage of developing approaches for associating polymer technologies for manufacturing of fluidic elements with integration of active or sensitive elements, particularly silicon devices.

Molecular imprinting science and technology: a survey of the literature for the years 2004-2011.

Abstract: Herein, we present a survey of the literature covering the development of molecular imprinting science and technology over the years 2004-2011. In total, 3779 references to the original papers, rev ...

Bio-microarray fabrication techniques--a review.

Abstract: Microarrays with biomolecules (e.g., DNA and proteins), cells, and tissues immobilized on solid substrates are important tools for biological research, including genomics, proteomics, and cell analysis. In this paper, the current state of microarray fabrication is reviewed. According to spot formation techniques, methods are categorized as "contact printing" and "non-contact printing." Contact printing is a widely used technology, comprising methods such as contact pin printing and microstamping. These methods have many advantages, including reproducibility of printed spots and facile maintenance, as well as drawbacks, including low-throughput fabrication of arrays. Non-contact printing techniques are newer and more varied, comprising photochemistry-based methods, laser writing, electrospray deposition, and inkjet technologies. These technologies emerged from other applications and have the potential to increase microarray fabrication throughput; however, there are several challenges in applying them to microarray fabrication, including interference from satellite drops and biomolecule denaturization.