Thom H. Dunning

Bio: Thom H. Dunning is an academic researcher from Pacific Northwest National Laboratory. The author has contributed to research in topics: Basis set & Electronic correlation. The author has an hindex of 27, co-authored 32 publications receiving 22546 citations. Previous affiliations of Thom H. Dunning include Environmental Molecular Sciences Laboratory & University of Tennessee.

Electron affinities of the first-row atoms revisited. Systematic basis sets and wave functions

Abstract: The calculation of accurate electron affinities (EAs) of atomic or molecular species is one of the most challenging tasks in quantum chemistry. We describe a reliable procedure for calculating the electron affinity of an atom and present results for hydrogen, boron, carbon, oxygen, and fluorine (hydrogen is included for completeness). This procedure involves the use of the recently proposed correlation‐consistent basis sets augmented with functions to describe the more diffuse character of the atomic anion coupled with a straightforward, uniform expansion of the reference space for multireference singles and doubles configuration‐interaction (MRSD‐CI) calculations. Comparison with previous results and with corresponding full CI calculations are given. The most accurate EAs obtained from the MRSD‐CI calculations are (with experimental values in parentheses) hydrogen 0.740 eV (0.754), boron 0.258 (0.277), carbon 1.245 (1.263), oxygen 1.384 (1.461), and fluorine 3.337 (3.401). The EAs obtained from the MR‐SD...

Gaussian basis sets for use in correlated molecular calculations. V. Core-valence basis sets for boron through neon

Abstract: The correlation‐consistent polarized valence basis sets (cc‐pVXZ) for the atoms boron through neon have been extended to treat core and core‐valence correlation effects. Basis functions were added to the existing cc‐pVXZ sets to form correlation‐consistent polarized core‐valence sets (cc‐pCVXZ) in the usual pattern: Double zeta added (1s1p), triple zeta added (2s2p1d), quadruple zeta added (3s3p2d1f), and quintuple zeta added (4s4p3d2f1g). The exponents of the core functions were determined by minimizing the difference between all‐electron and valence‐only correlation energies obtained from HF+1+2 calculations on the ground states of the atoms. With the cc‐pCVXZ sets, core, core‐valence, and valence correlation energies all converge exponentially toward apparent complete basis set (CBS) limits, as do the corresponding all‐electron singles and doubles CI energies. Several test applications of the new sets are presented: The first two ionization potentials of boron, the 3P–5S separation in carbon, and the X...

Gaussian basis sets for use in correlated molecular calculations. X. The atoms aluminum through argon revisited

Abstract: For molecules containing second row atoms, unacceptable errors have been found in extrapolating dissociation energies calculated with the standard correlation consistent basis sets to the complete basis set limit. By carefully comparing the convergence behavior of De(O2) and De(SO), we show that the cause of these errors is a result of two inter-related problems: near duplication of the exponents in two of the d sets and a lack of high-exponent functions in the early members of the sets. Similar problems exist for the f sets (and probably in higher angular momentum sets), but have only a minor effect on the calculated dissociation energies. A number of approaches to address the problems in the d sets were investigated. Well behaved convergence was obtained by augmenting the (1d) and (2d) sets with a high-exponent function and by replacing the (3d) set by the (4d) set and the (4d) set by the (5d) set and so on. To ensure satisfactory coverage of both the L and M shell regions, the exponents of the new d se...

Accurate correlation consistent basis sets for molecular core–valence correlation effects: The second row atoms Al–Ar, and the first row atoms B–Ne revisited

Abstract: Correlation consistent basis sets for accurately describing core–core and core–valence correlation effects in atoms and molecules have been developed for the second row atoms Al–Ar. Two different optimization strategies were investigated, which led to two families of core–valence basis sets when the optimized functions were added to the standard correlation consistent basis sets (cc-pVnZ). In the first case, the exponents of the augmenting primitive Gaussian functions were optimized with respect to the difference between all-electron and valence–electron correlated calculations, i.e., for the core–core plus core–valence correlation energy. This yielded the cc-pCVnZ family of basis sets, which are analogous to the sets developed previously for the first row atoms [D. E. Woon and T. H. Dunning, Jr., J. Chem. Phys. 103, 4572 (1995)]. Although the cc-pCVnZ sets exhibit systematic convergence to the all-electron correlation energy at the complete basis set limit, the intershell (core–valence) correlation energ...

Benchmark calculations with correlated molecular wave functions. IV. The classical barrier height of the H+H2→H2+H reaction

Abstract: Using systematic sequences of correlation consistent Gaussian basis sets from double to sextuple zeta quality, the classical barrier height of the H+H2 exchange reaction has been calculated by multireference configuration interaction (MRCI) methods. The MRCI calculations for collinear H3 have also been calibrated against large basis set full CI (FCI) results, which demonstrate that the MRCI treatment leads to energies less than 1 μhartree (≤0.001 kcal/mol) above the FCI energies. The dependence of both the H2 and H3 total energies on the basis set is found to be very regular, and this behavior has been used to extrapolate to the complete basis set (CBS) limits. The resulting estimate of the H–H–H CBS limit yields a classical barrier height, relative to exact H+H2, of 9.60±0.02 kcal/mol; the best directly calculated value for the barrier is equal to 9.62 kcal/mol. These results are in excellent agreement with recent quantum Monte Carlo calculations.

Fast parallel algorithms for short-range molecular dynamics

Abstract: Three parallel algorithms for classical molecular dynamics are presented. The first assigns each processor a fixed subset of atoms; the second assigns each a fixed subset of inter-atomic forces to compute; the third assigns each a fixed spatial region. The algorithms are suitable for molecular dynamics models which can be difficult to parallelize efficiently—those with short-range forces where the neighbors of each atom change rapidly. They can be implemented on any distributed-memory parallel machine which allows for message-passing of data between independently executing processors. The algorithms are tested on a standard Lennard-Jones benchmark problem for system sizes ranging from 500 to 100,000,000 atoms on several parallel supercomputers--the nCUBE 2, Intel iPSC/860 and Paragon, and Cray T3D. Comparing the results to the fastest reported vectorized Cray Y-MP and C90 algorithm shows that the current generation of parallel machines is competitive with conventional vector supercomputers even for small problems. For large problems, the spatial algorithm achieves parallel efficiencies of 90% and a 1840-node Intel Paragon performs up to 165 faster than a single Cray C9O processor. Trade-offs between the three algorithms and guidelines for adapting them to more complex molecular dynamics simulations are also discussed.

Semiempirical GGA-type density functional constructed with a long-range dispersion correction.

Abstract: A new density functional (DF) of the generalized gradient approximation (GGA) type for general chemistry applications termed B97-D is proposed. It is based on Becke's power-series ansatz from 1997 and is explicitly parameterized by including damped atom-pairwise dispersion corrections of the form C(6) x R(-6). A general computational scheme for the parameters used in this correction has been established and parameters for elements up to xenon and a scaling factor for the dispersion part for several common density functionals (BLYP, PBE, TPSS, B3LYP) are reported. The new functional is tested in comparison with other GGAs and the B3LYP hybrid functional on standard thermochemical benchmark sets, for 40 noncovalently bound complexes, including large stacked aromatic molecules and group II element clusters, and for the computation of molecular geometries. Further cross-validation tests were performed for organometallic reactions and other difficult problems for standard functionals. In summary, it is found that B97-D belongs to one of the most accurate general purpose GGAs, reaching, for example for the G97/2 set of heat of formations, a mean absolute deviation of only 3.8 kcal mol(-1). The performance for noncovalently bound systems including many pure van der Waals complexes is exceptionally good, reaching on the average CCSD(T) accuracy. The basic strategy in the development to restrict the density functional description to shorter electron correlation lengths scales and to describe situations with medium to large interatomic distances by damped C(6) x R(-6) terms seems to be very successful, as demonstrated for some notoriously difficult reactions. As an example, for the isomerization of larger branched to linear alkanes, B97-D is the only DF available that yields the right sign for the energy difference. From a practical point of view, the new functional seems to be quite robust and it is thus suggested as an efficient and accurate quantum chemical method for large systems where dispersion forces are of general importance.

Balanced basis sets of split valence, triple zeta valence and quadruple zeta valence quality for H to Rn: Design and assessment of accuracy

Abstract: Gaussian basis sets of quadruple zeta valence quality for Rb-Rn are presented, as well as bases of split valence and triple zeta valence quality for H-Rn. The latter were obtained by (partly) modifying bases developed previously. A large set of more than 300 molecules representing (nearly) all elements-except lanthanides-in their common oxidation states was used to assess the quality of the bases all across the periodic table. Quantities investigated were atomization energies, dipole moments and structure parameters for Hartree-Fock, density functional theory and correlated methods, for which we had chosen Moller-Plesset perturbation theory as an example. Finally recommendations are given which type of basis set is used best for a certain level of theory and a desired quality of results.

Toward reliable density functional methods without adjustable parameters: The PBE0 model

Abstract: We present an analysis of the performances of a parameter free density functional model (PBE0) obtained combining the so called PBE generalized gradient functional with a predefined amount of exact exchange. The results obtained for structural, thermodynamic, kinetic and spectroscopic (magnetic, infrared and electronic) properties are satisfactory and not far from those delivered by the most reliable functionals including heavy parameterization. The way in which the functional is derived and the lack of empirical parameters fitted to specific properties make the PBE0 model a widely applicable method for both quantum chemistry and condensed matter physics.

Accurate description of van der Waals complexes by density functional theory including empirical corrections

Abstract: An empirical method to account for van der Waals interactions in practical calculations with the density functional theory (termed DFT-D) is tested for a wide variety of molecular complexes. As in previous schemes, the dispersive energy is described by damped interatomic potentials of the form C6R−6. The use of pure, gradient-corrected density functionals (BLYP and PBE), together with the resolution-of-the-identity (RI) approximation for the Coulomb operator, allows very efficient computations for large systems. Opposed to previous work, extended AO basis sets of polarized TZV or QZV quality are employed, which reduces the basis set superposition error to a negligible extend. By using a global scaling factor for the atomic C6 coefficients, the functional dependence of the results could be strongly reduced. The “double counting” of correlation effects for strongly bound complexes is found to be insignificant if steep damping functions are employed. The method is applied to a total of 29 complexes of atoms and small molecules (Ne, CH4, NH3, H2O, CH3F, N2, F2, formic acid, ethene, and ethine) with each other and with benzene, to benzene, naphthalene, pyrene, and coronene dimers, the naphthalene trimer, coronene · H2O and four H-bonded and stacked DNA base pairs (AT and GC). In almost all cases, very good agreement with reliable theoretical or experimental results for binding energies and intermolecular distances is obtained. For stacked aromatic systems and the important base pairs, the DFT-D-BLYP model seems to be even superior to standard MP2 treatments that systematically overbind. The good results obtained suggest the approach as a practical tool to describe the properties of many important van der Waals systems in chemistry. Furthermore, the DFT-D data may either be used to calibrate much simpler (e.g., force-field) potentials or the optimized structures can be used as input for more accurate ab initio calculations of the interaction energies. © 2004 Wiley Periodicals, Inc. J Comput Chem 25: 1463–1473, 2004