Author
Thomas Bally
Other affiliations: University of Queensland, University of Wisconsin-Madison, University of Basel
Bio: Thomas Bally is an academic researcher from University of Fribourg. The author has contributed to research in topics: Radical ion & Excited state. The author has an hindex of 34, co-authored 171 publications receiving 4086 citations. Previous affiliations of Thomas Bally include University of Queensland & University of Wisconsin-Madison.
Papers published on a yearly basis
Papers
More filters
••
TL;DR: The current lineup of popular density functional theories, in particular those based on Becke's exchange functionals, fail to predict a correct dissociation behavior in radical ions where charge and spin must be separated (model: H2•+) or where both must be localized on one fragment (Model: He2•+) as discussed by the authors.
Abstract: The current lineup of popular density functional theories, in particular those based on Becke's exchange functionals, fail to predict a correct dissociation behavior in radical ions where charge and spin must be separated (model: H2•+) or where both must be localized on one fragment (model: He2•+). The repercussions of this on the location of certain transition states on radical ion potential energy surfaces are pointed out.
305 citations
••
TL;DR: It is demonstrated, on a test set of 80 conformationally stable molecules of various kinds carrying different functional groups, that, in contrast to what is claimed in the literature, large basis sets are not needed to obtain rather accurate predictions of (1)H NMR chemical shifts by quantum chemical calculations.
Abstract: The purpose of this paper is to convince practitioners of 1H NMR spectroscopy to consider simple quantum chemical calculations as a viable option to aid them in the assignment of their spectra. To this end, it is demonstrated, on a test set of 80 conformationally stable molecules of various kinds carrying different functional groups, that, in contrast to what is claimed in the literature, large basis sets are not needed to obtain rather accurate predictions of 1H NMR chemical shifts by quantum chemical calculations. On the other hand, modeling the solvent by an SCRF-type calculation may improve certain predictions significantly. The best accuracy/cost ratio is provided by GIAO calculations in chloroform as a solvent with the specially parametrized WP04 functional of Cramer et al. using the cc-pVDZ or 6-31G** basis set, closely followed by similar calculations with the ubiquitious B3LYP functional (both predict 1H chemical shifts with an average deviation of ca. 0.12 ppm, if the results are scaled linearly...
251 citations
••
161 citations
••
TL;DR: It is found that, if one uses core-augmented basis sets and allows for linear scaling of the raw results, calculations of only the Fermi contact term yield more accurate predictions than calculations where all four terms that contribute to J(H-H) are evaluated.
Abstract: The performance of 250 different computational protocols (combinations of density functionals, basis sets and methods) was assessed on a set of 165 well-established experimental 1H–1H nuclear coupling constants (JH–H) from 65 molecules spanning a wide range of “chemical space”. Thereby we found that, if one uses core-augmented basis sets and allows for linear scaling of the raw results, calculations of only the Fermi contact term yield more accurate predictions than calculations where all four terms that contribute to JH–H are evaluated. It turns out that B3LYP/6-31G(d,p)u+1s is the best (and, in addition, one of the most economical) of all tested methods, yielding predictions of JH–H with a root-mean-square deviation from experiment of less than 0.5 Hz for our test set. Another method that does similarly well, without the need for additional 1s basis functions, is B3LYP/cc-pVTZ, which is, however, ca. 8 times more “expensive” in terms of CPU time. A selection of the better methods was tested on a probe s...
159 citations
••
TL;DR: In this paper, the geometries and force fields of phenylcarbene and cycloheptatrienylidene (CHT) in their singlet and triplet electronic states as well as of CHTE and bicyclo[4.1.0]heptatriene and the transition states for the formation and decay of the latter were evaluated by various methods.
Abstract: The geometries and force fields of phenylcarbene (PC) and cycloheptatrienylidene (CHT) in their singlet and triplet electronic states as well as of cycloheptatetraene (CHTE) and bicyclo[4.1.0]heptatriene (BCT) and the transition states for the formation and decay of the latter were evaluated by various methods. Relative single point energies were calculated at the CCSD(T)/cc-pVDZ//BLYP/6-31G* level. Finally, the effects of extending the basis set to triple-ζ quality were estimated by (R)MP2 calculations and carried over proportionally to CCSD(T). These calculations show that CHTE which has a strongly distorted allenic structure is the most stable species on that part of the C(CH)6 surface which was examined in the present study, followed by planar 3PC. The strained BCT is found to be nearly degenerate in energy with 1PC, but the high activation energy for its formation from 1PC together with the low activation energy for ring-opening to CHTE suggests that this species cannot persist under the experimental...
139 citations
Cited by
More filters
••
[...]
TL;DR: In this paper, a sedimentological core and petrographic characterisation of samples from eleven boreholes from the Lower Carboniferous of Bowland Basin (Northwest England) is presented.
Abstract: Deposits of clastic carbonate-dominated (calciclastic) sedimentary slope systems in the rock record have been identified mostly as linearly-consistent carbonate apron deposits, even though most ancient clastic carbonate slope deposits fit the submarine fan systems better. Calciclastic submarine fans are consequently rarely described and are poorly understood. Subsequently, very little is known especially in mud-dominated calciclastic submarine fan systems. Presented in this study are a sedimentological core and petrographic characterisation of samples from eleven boreholes from the Lower Carboniferous of Bowland Basin (Northwest England) that reveals a >250 m thick calciturbidite complex deposited in a calciclastic submarine fan setting. Seven facies are recognised from core and thin section characterisation and are grouped into three carbonate turbidite sequences. They include: 1) Calciturbidites, comprising mostly of highto low-density, wavy-laminated bioclast-rich facies; 2) low-density densite mudstones which are characterised by planar laminated and unlaminated muddominated facies; and 3) Calcidebrites which are muddy or hyper-concentrated debrisflow deposits occurring as poorly-sorted, chaotic, mud-supported floatstones. These
9,929 citations
••
TL;DR: The re-optimization of a recently proposed long-range corrected hybrid density functional, omegaB97X-D, to include empirical atom-atom dispersion corrections yields satisfactory accuracy for thermochemistry, kinetics, and non-covalent interactions.
Abstract: We report re-optimization of a recently proposed long-range corrected (LC) hybrid density functional [J.-D. Chai and M. Head-Gordon, J. Chem. Phys., 2008, 128, 084106] to include empirical atom–atom dispersion corrections. The resulting functional, ωB97X-D yields satisfactory accuracy for thermochemistry, kinetics, and non-covalent interactions. Tests show that for non-covalent systems, ωB97X-D shows slight improvement over other empirical dispersion-corrected density functionals, while for covalent systems and kinetics it performs noticeably better. Relative to our previous functionals, such as ωB97X, the new functional is significantly superior for non-bonded interactions, and very similar in performance for bonded interactions.
9,184 citations
•
TL;DR: Chai and Head-Gordon as discussed by the authors proposed a long-range corrected (LC) hybrid density functional with Damped Atom-Atom Dispersion corrections, which is called ωB97X-D.
Abstract: Long-Range Corrected Hybrid Density Functionals with Damped Atom-Atom Dispersion Corrections Jeng-Da Chai ∗ and Martin Head-Gordon † Department of Chemistry, University of California and Chemical Sciences Division, Lawrence Berkeley National Laboratory, Berkeley, California 94720, USA (Dated: June 14, 2008) We report re-optimization of a recently proposed long-range corrected (LC) hybrid density func- tionals [J.-D. Chai and M. Head-Gordon, J. Chem. Phys. 128, 084106 (2008)] to include empirical atom-atom dispersion corrections. The resulting functional, ωB97X-D yields satisfactory accuracy for thermochemistry, kinetics, and non-covalent interactions. Tests show that for non-covalent sys- tems, ωB97X-D shows slight improvement over other empirical dispersion-corrected density func- tionals, while for covalent systems and kinetics, it performs noticeably better. Relative to our previous functionals, such as ωB97X, the new functional is significantly superior for non-bonded interactions, and very similar in performance for bonded interactions. I. INTRODUCTION Due to its favorable cost-to-performance ratio, Kohn- Sham density-functional theory (KS-DFT) [1, 2] has be- come the most popular electronic structure theory for large-scale ground-state systems [3–5]. Its extension for treating excited-state systems [6, 7], time-dependent den- sity functional theory (TDDFT), has also been developed to the stage where it is now very widely used. The essential ingredient of KS-DFT, the exchange- correlation energy functional E xc , remains unknown and needs to be approximated. Semi-local gradient-corrected density functionals, though successful in many applica- tions, lead to qualitative failures in some circumstances, where the accurate treatment of non-locality of exchange- correlation hole becomes crucial. These situations occur mostly in the asymptotic regions of molecular systems, such as spurious self-interaction effects upon dissociation [8, 9] and dramatic failures for long-range charge-transfer excitations [10–12]. Widely used hybrid density function- als, like B3LYP [13, 14], do not qualitatively resolve these problems. These self-interaction errors can be qualitatively re- solved using the long-range corrected (LC) hybrid density functionals [15, 16, 18], which employ 100% Hartree-Fock (HF) exchange for long-range electron-electron interac- tions. This is accomplished by a partition of unity, using erf(ωr)/r for long-range (treated by HF exchange) and erfc(ωr)/r for short-range (treated by an exchange func- tional), with the parameter ω controlling the partition- ing. Over the past five years, the LC hybrid scheme has been attracting increasing attention [15] since its compu- tational cost is comparable with standard hybrid func- tionals [13]. However, LC functionals have tended to be inferior to the best hybrids for properties such as ther- mochemistry. ∗ Electronic † Author address: jdchai@berkeley.edu to whom correspondence should be addressed. Electronic address: mhg@cchem.berkeley.edu Recently we have improved the overall accuracy at- tainable with the LC functionals by using a systematic optimization procedure [18]. One important conclusion is that optimizing LC and hybrid functionals with identical numbers of parameters in their GGA exchange and cor- relation terms leads to noticeably better results for all properties using the LC form. The resulting LC func- tional is called ωB97. Further statistically significant improvement results from re-optimizing the entire func- tional with one extra parameter corresponding to an ad- justable fraction of short-range exact exchange, defining the ωB97X functional. Independent test sets covering thermochemistry and non-covalent interactions support these conclusions. However, problems associated with the lack of non-locality of the correlation hole, such as the lack of dispersion interactions (London forces), still remain, as the semi-local correlation functionals cannot capture long-range correlation effects [19, 20]. There have been significant efforts to develop a frame- work that can account for long-range dispersion effects within DFT. Zaremba and Kohn (ZK) [21] derived an exact expression for the second-order dispersion energy in terms of the exact density-density response functions of the two separate systems. To obtain a tractable non- local dispersion functional, Dobson and Dinite (DD) [22] made local density approximations to the ZK response functions. DD’s non-local correlation functional was ob- tained independently [23] by modifying the effective den- sity defined in the earlier work of Rapcewicz and Ashcroft Starting from the formally exact expression of KS- DFT, the adiabatic connection fluctuation-dissipation theorem (ACFDT), for the ground-state exchange- correlation energy, Langreth and co-workers [25] devel- oped a so-called van der Waals density functional (vdW- DF) by making a series of reasonable approximations to yield a computationally tractable scheme. Recently, Becke and Johnson (BJ) developed a series of post-HF correlation models with a novel treatment for dispersion interactions based on the exchange-hole dipole moment [26]. The origin of dispersion claimed in the BJ models was recently questioned by Alonso, and A.
6,345 citations
••
TL;DR: The Rehybridization of the Acceptor (RICT) and Planarization ofThe Molecule (PICT) III is presented, with a comparison of the effects on yield and radiationless deactivation processes.
Abstract: 6. Rehybridization of the Acceptor (RICT) 3908 7. Planarization of the Molecule (PICT) 3909 III. Fluorescence Spectroscopy 3909 A. Solvent Effects and the Model Compounds 3909 1. Solvent Effects on the Spectra 3909 2. Steric Effects and Model Compounds 3911 3. Bandwidths 3913 4. Isoemissive Points 3914 B. Dipole Moments 3915 C. Radiative Rates and Transition Moments 3916 1. Quantum Yields and Radiationless Deactivation Processes 3916
2,924 citations
••
TL;DR: The qualitative failures of the commonly used hybrid density functionals in some "difficult problems," such as dissociation of symmetric radical cations and long-range charge-transfer excitations, are significantly reduced by the present LC hybriddensity functionals.
Abstract: A general scheme for systematically modeling long-range corrected (LC) hybrid density functionals is proposed. Our resulting two LC hybrid functionals are shown to be accurate in thermochemistry, kinetics, and noncovalent interactions, when compared with common hybrid density functionals. The qualitative failures of the commonly used hybrid density functionals in some “difficult problems,” such as dissociation of symmetric radical cations and long-range charge-transfer excitations, are significantly reduced by the present LC hybrid density functionals.
2,852 citations