Thomas Frauenheim

Bio: Thomas Frauenheim is an academic researcher from University of Bremen. The author has contributed to research in topics: Density functional theory & Band gap. The author has an hindex of 70, co-authored 451 publications receiving 17887 citations. Previous affiliations of Thomas Frauenheim include China Academy of Engineering Physics & University of Paderborn.

Hydrogen bonding and stacking interactions of nucleic acid base pairs: A density-functional-theory based treatment

Abstract: We extend an approximate density functional theory (DFT) method for the description of long-range dispersive interactions which are normally neglected by construction, irrespective of the correlation function applied. An empirical formula, consisting of an R−6 term is introduced, which is appropriately damped for short distances; the corresponding C6 coefficient, which is calculated from experimental atomic polarizabilities, can be consistently added to the total energy expression of the method. We apply this approximate DFT plus dispersion energy method to describe the hydrogen bonding and stacking interactions of nucleic acid base pairs. Comparison to MP2/6-31G*(0.25) results shows that the method is capable of reproducing hydrogen bonding as well as the vertical and twist dependence of the interaction energy very accurately.

Phosphorene as a Superior Gas Sensor: Selective Adsorption and Distinct I-V Response.

Abstract: Recent reports on the fabrication of phosphorene, that is, mono- or few-layer black phosphorus, have raised exciting prospects of an outstanding two-dimensional (2D) material that exhibits excellent properties for nanodevice applications. Here, we study by first-principles calculations the adsorption of CO, CO2, NH3, NO, and NO2 gas molecules on a monolayer phosphorene. Our results predict superior sensing performance of phosphorene that rivals or even surpasses that of other 2D materials such as graphene and MoS2. We determine the optimal adsorption positions of these molecules on the phosphorene and identify molecular doping, that is, charge transfer between the molecules and phosphorene, as the driving mechanism for the high adsorption strength. We further calculated the current-voltage (I-V) relation using the nonequilibrium Green's function (NEGF) formalism. The transport features show large (1-2 orders of magnitude) anisotropy along different (armchair or zigzag) directions, which is consistent with the anisotropic electronic band structure of phosphorene. Remarkably, the I-V relation exhibits distinct responses with a marked change of the I-V relation along either the armchair or the zigzag directions depending on the type of molecules. Such selectivity and sensitivity to adsorption makes phosphorene a superior gas sensor that promises wide-ranging applications.

Atomistic simulations of complex materials: ground-state and excited-state properties

Abstract: The present status of development of the density-functional-based tightbinding (DFTB) method is reviewed. As a two-centre approach to densityfunctional theory (DFT), it combines computational efficiency with reliability and transferability. Utilizing a minimal-basis representation of Kohn–Sham eigenstates and a superposition of optimized neutral-atom potentials and related charge densities for constructing the effective many-atom potential, all integrals are calculated within DFT. Self-consistency is included at the level of Mulliken charges rather than by self-consistently iterating electronic spin densities and effective potentials. Excited-state properties are accessible within the linear response approach to time-dependent (TD) DFT. The coupling of electronic and ionic degrees of freedom further allows us to follow the non-adiabatic structure evolution via coupled electron–ion molecular dynamics in energetic particle collisions and in the presence of ultrashort intense laser pulses. We either briefly outline or give references describing examples of applications to ground-state and excited-state properties. Addressing the scaling problems in size and time generally and for biomolecular systems in particular, we describe the implementation of the parallel ‘divide-and-conquer’ order-N method with DFTB and the coupling of the DFTB approach as a quantum method with molecular mechanics force fields.

DFTB+, a software package for efficient approximate density functional theory based atomistic simulations

Abstract: DFTB+ is a versatile community developed open source software package offering fast and efficient methods for carrying out atomistic quantum mechanical simulations. By implementing various methods approximating density functional theory (DFT), such as the density functional based tight binding (DFTB) and the extended tight binding method, it enables simulations of large systems and long timescales with reasonable accuracy while being considerably faster for typical simulations than the respective ab initio methods. Based on the DFTB framework, it additionally offers approximated versions of various DFT extensions including hybrid functionals, time dependent formalism for treating excited systems, electron transport using non-equilibrium Green’s functions, and many more. DFTB+ can be used as a user-friendly standalone application in addition to being embedded into other software packages as a library or acting as a calculation-server accessed by socket communication. We give an overview of the recently developed capabilities of the DFTB+ code, demonstrating with a few use case examples, discuss the strengths and weaknesses of the various features, and also discuss on-going developments and possible future perspectives.

Structure and electronic properties of MoS2 nanotubes

Abstract: Structural and electronic properties as well as the stability of MoS2 nanotubes are studied using the density-functional-based tight-binding method. It is found that MoS2 zigzag ( n,0) nanotubes exhibit a narrow direct band gap and MoS2 armchair ( n,n) possess a nonzero moderate direct gap. Interestingly, the ( n,n) tubes show a small indirect gap similar to the direct gap of ( n,0) nanotubes. Simulated electron diffraction patterns confirm the existence of armchair and zigzag disulphide nanotubes. The structure of the MoS2 nanotube tips is explained by introducing topological defects which produce positive and negative curvature.

I and i

Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

A consistent and accurate ab initio parametrization of density functional dispersion correction (DFT-D) for the 94 elements H-Pu

Abstract: The method of dispersion correction as an add-on to standard Kohn-Sham density functional theory (DFT-D) has been refined regarding higher accuracy, broader range of applicability, and less empiricism. The main new ingredients are atom-pairwise specific dispersion coefficients and cutoff radii that are both computed from first principles. The coefficients for new eighth-order dispersion terms are computed using established recursion relations. System (geometry) dependent information is used for the first time in a DFT-D type approach by employing the new concept of fractional coordination numbers (CN). They are used to interpolate between dispersion coefficients of atoms in different chemical environments. The method only requires adjustment of two global parameters for each density functional, is asymptotically exact for a gas of weakly interacting neutral atoms, and easily allows the computation of atomic forces. Three-body nonadditivity terms are considered. The method has been assessed on standard benchmark sets for inter- and intramolecular noncovalent interactions with a particular emphasis on a consistent description of light and heavy element systems. The mean absolute deviations for the S22 benchmark set of noncovalent interactions for 11 standard density functionals decrease by 15%-40% compared to the previous (already accurate) DFT-D version. Spectacular improvements are found for a tripeptide-folding model and all tested metallic systems. The rectification of the long-range behavior and the use of more accurate C(6) coefficients also lead to a much better description of large (infinite) systems as shown for graphene sheets and the adsorption of benzene on an Ag(111) surface. For graphene it is found that the inclusion of three-body terms substantially (by about 10%) weakens the interlayer binding. We propose the revised DFT-D method as a general tool for the computation of the dispersion energy in molecules and solids of any kind with DFT and related (low-cost) electronic structure methods for large systems.

Fast parallel algorithms for short-range molecular dynamics

Abstract: Three parallel algorithms for classical molecular dynamics are presented. The first assigns each processor a fixed subset of atoms; the second assigns each a fixed subset of inter-atomic forces to compute; the third assigns each a fixed spatial region. The algorithms are suitable for molecular dynamics models which can be difficult to parallelize efficiently—those with short-range forces where the neighbors of each atom change rapidly. They can be implemented on any distributed-memory parallel machine which allows for message-passing of data between independently executing processors. The algorithms are tested on a standard Lennard-Jones benchmark problem for system sizes ranging from 500 to 100,000,000 atoms on several parallel supercomputers--the nCUBE 2, Intel iPSC/860 and Paragon, and Cray T3D. Comparing the results to the fastest reported vectorized Cray Y-MP and C90 algorithm shows that the current generation of parallel machines is competitive with conventional vector supercomputers even for small problems. For large problems, the spatial algorithm achieves parallel efficiencies of 90% and a 1840-node Intel Paragon performs up to 165 faster than a single Cray C9O processor. Trade-offs between the three algorithms and guidelines for adapting them to more complex molecular dynamics simulations are also discussed.

Semiempirical GGA-type density functional constructed with a long-range dispersion correction.

Abstract: A new density functional (DF) of the generalized gradient approximation (GGA) type for general chemistry applications termed B97-D is proposed. It is based on Becke's power-series ansatz from 1997 and is explicitly parameterized by including damped atom-pairwise dispersion corrections of the form C(6) x R(-6). A general computational scheme for the parameters used in this correction has been established and parameters for elements up to xenon and a scaling factor for the dispersion part for several common density functionals (BLYP, PBE, TPSS, B3LYP) are reported. The new functional is tested in comparison with other GGAs and the B3LYP hybrid functional on standard thermochemical benchmark sets, for 40 noncovalently bound complexes, including large stacked aromatic molecules and group II element clusters, and for the computation of molecular geometries. Further cross-validation tests were performed for organometallic reactions and other difficult problems for standard functionals. In summary, it is found that B97-D belongs to one of the most accurate general purpose GGAs, reaching, for example for the G97/2 set of heat of formations, a mean absolute deviation of only 3.8 kcal mol(-1). The performance for noncovalently bound systems including many pure van der Waals complexes is exceptionally good, reaching on the average CCSD(T) accuracy. The basic strategy in the development to restrict the density functional description to shorter electron correlation lengths scales and to describe situations with medium to large interatomic distances by damped C(6) x R(-6) terms seems to be very successful, as demonstrated for some notoriously difficult reactions. As an example, for the isomerization of larger branched to linear alkanes, B97-D is the only DF available that yields the right sign for the energy difference. From a practical point of view, the new functional seems to be quite robust and it is thus suggested as an efficient and accurate quantum chemical method for large systems where dispersion forces are of general importance.