Thomas J. LaTempa

Bio: Thomas J. LaTempa is an academic researcher from Pennsylvania State University. The author has contributed to research in topics: Nanotube & Nanoporous. The author has an hindex of 17, co-authored 20 publications receiving 4748 citations.

Vertically aligned single crystal TiO2 nanowire arrays grown directly on transparent conducting oxide coated glass: synthesis details and applications

Abstract: Single-crystal one-dimensional (1D) semiconductor architectures are important in materials-based applications requiring a large surface area, morphological control, and superior charge transport. Titania has widespread utility in applications including photocatalysis, photochromism, photovoltaics, and gas sensors. While considerable efforts have focused on the preparation of 1D TiO2, no methods have been available to grow crystalline nanowire arrays directly onto transparent conducting oxide (TCO) substrates, greatly limiting the performance of TiO2 photoelectrochemical devices. Herein, we present a straightforward low temperature method to prepare single crystal rutile TiO2 nanowire arrays up to 5 microm long on TCO glass via a non-polar solvent/hydrophilic substrate interfacial reaction under mild hydrothermal conditions. The as-prepared densely packed nanowires grow vertically oriented from the TCO glass substrate along the (110) crystal plane with a preferred (001) orientation. In a dye sensitized solar cell, N719 dye, using TiO2 nanowire arrays 2-3 microm long we achieve an AM 1.5 photoconversion efficiency of 5.02%.

High-Rate Solar Photocatalytic Conversion of CO2 and Water Vapor to Hydrocarbon Fuels

Abstract: Efficient solar conversion of carbon dioxide and water vapor to methane and other hydrocarbons is achieved using nitrogen-doped titania nanotube arrays, with a wall thickness low enough to facilitate effective carrier transfer to the adsorbing species, surface-loaded with nanodimensional islands of cocatalysts platinum and/or copper. All experiments are conducted in outdoor sunlight at University Park, PA. Intermediate reaction products, hydrogen and carbon monoxide, are also detected with their relative concentrations underlying hydrocarbon production rates and dependent upon the nature of the cocatalysts on the nanotube array surface. Using outdoor global AM 1.5 sunlight, 100 mW/cm(2), a hydrocarbon production rate of 111 ppm cm(-2) h(-1), or approximately 160 microL/(g h), is obtained when the nanotube array samples are loaded with both Cu and Pt nanoparticles. This rate of CO(2) to hydrocarbon production obtained under outdoor sunlight is at least 20 times higher than previous published reports, which were conducted under laboratory conditions using UV illumination.

P-type Cu--Ti--O nanotube arrays and their use in self-biased heterojunction photoelectrochemical diodes for hydrogen generation.

Abstract: Copper and titanium remain relatively plentiful in the earth's crust; hence, their use for large-scale solar energy conversion technologies is of significant interest. We describe fabrication of vertically oriented p-type Cu-Ti-O nanotube array films by anodization of copper rich (60% to 74%) Ti metal films cosputtered onto fluorine doped tin oxide (FTO) coated glass. Cu-Ti-O nanotube array films 1 mum thick exhibit external quantum efficiencies up to 11%, with a spectral photoresponse indicating that the complete visible spectrum, 380 to 885 nm, contributes significantly to the photocurrent generation. Water-splitting photoelectrochemical pn-junction diodes are fabricated using p-type Cu-Ti-O nanotube array films in combination with n-type TiO 2 nanotube array films. With the glass substrates oriented back-to-back, light is incident upon the UV absorbing n-TiO 2 side, with the visible light passing to the p-Cu-Ti-O side. In a manner analogous to photosynthesis, photocatalytic reactions are powered only by the incident light to generate fuel with oxygen evolved from the n-TiO 2 side of the diode and hydrogen from the p-Cu-Ti-O side. To date, we find under global AM 1.5 illumination that such photocorrosion-stable diodes generate a photocurrent of approximately 0.25 mA/cm (2), at a photoconversion efficiency of 0.30%.

Dye-Sensitized Solar Cells

Abstract: Dye-sensitized solar cells (DSCs) offer the possibilities to design solar cells with a large flexibility in shape, color, and transparency. DSC research groups have been established around the worl ...

Semiconductor-based Photocatalytic Hydrogen Generation

Abstract: 2.3. Evaluation of Photocatalytic Water Splitting 6507 2.3.1. Photocatalytic Activity 6507 2.3.2. Photocatalytic Stability 6507 3. UV-Active Photocatalysts for Water Splitting 6507 3.1. d0 Metal Oxide Photocatalyts 6507 3.1.1. Ti-, Zr-Based Oxides 6507 3.1.2. Nb-, Ta-Based Oxides 6514 3.1.3. W-, Mo-Based Oxides 6517 3.1.4. Other d0 Metal Oxides 6518 3.2. d10 Metal Oxide Photocatalyts 6518 3.3. f0 Metal Oxide Photocatalysts 6518 3.4. Nonoxide Photocatalysts 6518 4. Approaches to Modifying the Electronic Band Structure for Visible-Light Harvesting 6519

TiO2 nanotubes: synthesis and applications.

Abstract: TiO(2) is one of the most studied compounds in materials science. Owing to some outstanding properties it is used for instance in photocatalysis, dye-sensitized solar cells, and biomedical devices. In 1999, first reports showed the feasibility to grow highly ordered arrays of TiO(2) nanotubes by a simple but optimized electrochemical anodization of a titanium metal sheet. This finding stimulated intense research activities that focused on growth, modification, properties, and applications of these one-dimensional nanostructures. This review attempts to cover all these aspects, including underlying principles and key functional features of TiO(2), in a comprehensive way and also indicates potential future directions of the field.

Recent advances in sensitized mesoscopic solar cells.

Abstract: Perhaps the largest challenge for our global society is to find ways to replace the slowly but inevitably vanishing fossil fuel supplies by renewable resources and, at the same time, avoid negative effects from the current energy system on climate, environment, and health. The quality of human life to a large degree depends upon the availability of clean energy sources. The worldwide power consumption is expected to double in the next 3 decades because of the increase in world population and the rising demand of energy in the developing countries. This implies enhanced depletion of fossil fuel reserves, leading to further aggravation of the environmental pollution. As a consequence of dwindling resources, a huge power supply gap of 14 terawatts is expected to open up by year 2050 equaling today’s entire consumption, thus threatening to create a planetary emergency of gigantic dimensions. Solar energy is expected to play a crucial role as a future energy source. The sun provides about 120 000 terawatts to ...

Hydrogen-Treated TiO2 Nanowire Arrays for Photoelectrochemical Water Splitting

Abstract: We report the first demonstration of hydrogen treatment as a simple and effective strategy to fundamentally improve the performance of TiO2 nanowires for photoelectrochemical (PEC) water splitting. Hydrogen-treated rutile TiO2 (H:TiO2) nanowires were prepared by annealing the pristine TiO2 nanowires in hydrogen atmosphere at various temperatures in a range of 200–550 °C. In comparison to pristine TiO2 nanowires, H:TiO2 samples show substantially enhanced photocurrent in the entire potential window. More importantly, H:TiO2 samples have exceptionally low photocurrent saturation potentials of −0.6 V vs Ag/AgCl (0.4 V vs RHE), indicating very efficient charge separation and transportation. The optimized H:TiO2 nanowire sample yields a photocurrent density of ∼1.97 mA/cm2 at −0.6 V vs Ag/AgCl, in 1 M NaOH solution under the illumination of simulated solar light (100 mW/cm2 from 150 W xenon lamp coupled with an AM 1.5G filter). This photocurrent density corresponds to a solar-to-hydrogen (STH) efficiency of ∼1...