Thomas J. Pinnavaia

Bio: Thomas J. Pinnavaia is an academic researcher from Michigan State University. The author has contributed to research in topics: Mesoporous material & Catalysis. The author has an hindex of 82, co-authored 340 publications receiving 33896 citations. Previous affiliations of Thomas J. Pinnavaia include The Coca-Cola Company.

A neutral templating route to mesoporous molecular sieves.

Abstract: A neutral templating route for preparing mesoporous molecular sieves is demonstrated based on hydrogen-bonding interactions and self-assembly between neutral primary amine micelles (S degrees ) and neutral inorganic precursors (l degrees ). The S degrees l degrees templating pathway produces ordered mesoporous materials with thicker framework walls, smaller x-ray scattering domain sizes, and substantially improved textural mesoporosities in comparison with M41S materials templated by quaternary ammonium cations of equivalent chain length. This synthetic strategy also allows for the facile, environmentally benign recovery of the cost-intensive template by simple solvent extraction methods. The S degrees 1 degrees templating route provides for the synthesis of other oxide mesostructures (such as aluminas) that may be less readily accessible by electrostatic templating pathways.

Titanium-containing mesoporous molecular sieves for catalytic oxidation of aromatic compounds

Abstract: Titanium silicalite is an effective molecular-sieve catalyst for the selective oxidation of alkanes, the hydroxylation of phenol and the epoxidation of alkenes in the presence of H2O2 (refs 1-3). The range of organic compounds that can be oxidized is greatly limited, however, by the relatively small pore size (about 0.6 nm) of the host framework. Large-pore (mesoporous) silica-based molecular sieves have been prepared recently by Kresge et al. and Kuroda et al.; the former used a templating approach in which the formation of an inorganic mesoporous structure is assisted by self-organization of surfactants, and the latter involved topochemical rearrangement of a layered silica precursor. Here we describe the use of the templating approach to synthesize mesoporous silica-based molecular sieves partly substituted with titanium--large-pore analogues of titanium silicalite. We find that these materials show selective catalytic activity towards the oxidation of 2,6-di-tert-butyl phenol to the corresponding quinone and the conversion of benzene to phenol.

Templating of Mesoporous Molecular Sieves by Nonionic Polyethylene Oxide Surfactants

Abstract: Mesoporous silica molecular sieves have been prepared by the hydrolysis of tetraethylorthosilicate in the presence of low-cost, nontoxic, and biodegradable polyethylene oxide (PEO) surfactants, which act as the structure-directing (templating) agents. This nonionic, surfactant-neutral, inorganic-precursor templating pathway to mesostructures uses hydrogen bonding interactions between the hydrophilic surfaces of flexible rod- or worm-like micelles and Si(OC 2 H 5 ) 4-x (OH) x hydrolysis products to assemble an inorganic oxide framework. Disordered channel structures with uniform diameters ranging from 2.0 to 5.8 nanometers have been obtained by varying the size and structure of the surfactant molecules. Metal-substituted silica and pure alumina mesostructures have also been prepared by the hydrolysis of the corresponding alkoxides in the presence of PEO surfactants. These results suggest that nonionic templating may provide a general pathway for the preparation of mesoporous oxides.

Intercalated Clay Catalysts

Abstract: Recent advances in the intercalation of metal complex cations in smectite clay minerals are leading to the development of new classes of selective heterogeneous catalysts. The selectivity of both metal-catalyzed and proton-catalyzed chemical conversions in clay intercalates can often be regulated by controlling surface chemical equilibria, interlamellar swelling, or reactant pair proximity in the interlayer regions. Also, the intercalation of polynuclear hydroxy metal cations and metal cluster cations in smectites affords new pillared clay catalysts with pore sizes that can be made larger than those of conventional zeolite catalysts.

Ordered mesoporous molecular sieves synthesized by a liquid-crystal template mechanism

Abstract: MICROPOROUS and mesoporous inorganic solids (with pore diameters of ≤20 A and ∼20–500 A respectively)1 have found great utility as catalysts and sorption media because of their large internal surface area. Typical microporous materials are the crystalline framework solids, such as zeolites2, but the largest pore dimensions found so far are ∼10–12 A for some metallophosphates3–5 and ∼14 A for the mineral cacoxenite6. Examples of mesoporous solids include silicas7 and modified layered materials8–11, but these are invariably amorphous or paracrystalline, with pores that are irregularly spaced and broadly distributed in size8,12. Pore size can be controlled by intercalation of layered silicates with a surfactant species9,13, but the final product retains, in part, the layered nature of the precursor material. Here we report the synthesis of mesoporous solids from the calcination of aluminosilicate gels in the presence of surfactants. The material14,15 possesses regular arrays of uniform channels, the dimensions of which can be tailored (in the range 16 A to 100 A or more) through the choice of surfactant, auxiliary chemicals and reaction conditions. We propose that the formation of these materials takes place by means of a liquid-crystal 'templating' mechanism, in which the silicate material forms inorganic walls between ordered surfactant micelles.

Triblock copolymer syntheses of mesoporous silica with periodic 50 to 300 angstrom pores

Abstract: Use of amphiphilic triblock copolymers to direct the organization of polymerizing silica species has resulted in the preparation of well-ordered hexagonal mesoporous silica structures (SBA-15) with uniform pore sizes up to approximately 300 angstroms. The SBA-15 materials are synthesized in acidic media to produce highly ordered, two-dimensional hexagonal (space group p6mm) silica-block copolymer mesophases. Calcination at 500°C gives porous structures with unusually large interlattice d spacings of 74.5 to 320 angstroms between the (100) planes, pore sizes from 46 to 300 angstroms, pore volume fractions up to 0.85, and silica wall thicknesses of 31 to 64 angstroms. SBA-15 can be readily prepared over a wide range of uniform pore sizes and pore wall thicknesses at low temperature (35° to 80°C), using a variety of poly(alkylene oxide) triblock copolymers and by the addition of cosolvent organic molecules. The block copolymer species can be recovered for reuse by solvent extraction with ethanol or removed by heating at 140°C for 3 hours, in both cases, yielding a product that is thermally stable in boiling water.

A new family of mesoporous molecular sieves prepared with liquid crystal templates

Abstract: The synthesis, characterization, and proposed mechanism of formation of a new family of silicatelaluminosilicate mesoporous molecular sieves designated as M41S is described. MCM-41, one member of this family, exhibits a hexagonal arrangement of uniform mesopores whose dimensions may be engineered in the range of - 15 A to greater than 100 A. Other members of this family, including a material exhibiting cubic symmetry, have ken synthesized. The larger pore M41S materials typically have surface areas above 700 m2/g and hydrocarbon sorption capacities of 0.7 cc/g and greater. A templating mechanism (liquid crystal templating-LCT) in which surfactant liquid crystal structures serve as organic templates is proposed for the formation of these materials. In support of this templating mechanism, it was demonstrated that the structure and pore dimensions of MCM-41 materials are intimately linked to the properties of the surfactant, including surfactant chain length and solution chemistry. The presence of variable pore size MCM-41, cubic material, and other phases indicates that M41S is an extensive family of materials.

Fuzzy Nanoassemblies: Toward Layered Polymeric Multicomposites

Abstract: Multilayer films of organic compounds on solid surfaces have been studied for more than 60 years because they allow fabrication of multicomposite molecular assemblies of tailored architecture. However, both the Langmuir-Blodgett technique and chemisorption from solution can be used only with certain classes of molecules. An alternative approach—fabrication of multilayers by consecutive adsorption of polyanions and polycations—is far more general and has been extended to other materials such as proteins or colloids. Because polymers are typically flexible molecules, the resulting superlattice architectures are somewhat fuzzy structures, but the absence of crystallinity in these films is expected to be beneficial for many potential applications.