Thomas P. Russell

Bio: Thomas P. Russell is an academic researcher from University of Massachusetts Amherst. The author has contributed to research in topics: Copolymer & Organic solar cell. The author has an hindex of 141, co-authored 1012 publications receiving 80055 citations. Previous affiliations of Thomas P. Russell include Lawrence Berkeley National Laboratory & Ulsan National Institute of Science and Technology.

Nanoparticle Polymer Composites: Where Two Small Worlds Meet

Abstract: The mixing of polymers and nanoparticles is opening pathways for engineering flexible composites that exhibit advantageous electrical, optical, or mechanical properties. Recent advances reveal routes to exploit both enthalpic and entropic interactions so as to direct the spatial distribution of nanoparticles and thereby control the macroscopic performance of the material. For example, by tailoring the particle coating and size, researchers have created self-healing materials for improved sustainability and self-corralling rods for photovoltaic applications. A challenge for future studies is to create hierarchically structured composites in which each sublayer contributes a distinct function to yield a mechanically integrated, multifunctional material.

Ultrahigh-Density Nanowire Arrays Grown in Self-Assembled Diblock Copolymer Templates

Abstract: We show a simple, robust, chemical route to the fabrication of ultrahigh-density arrays of nanopores with high aspect ratios using the equilibrium self-assembled morphology of asymmetric diblock copolymers. The dimensions and lateral density of the array are determined by segmental interactions and the copolymer molecular weight. Through direct current electrodeposition, we fabricated vertical arrays of nanowires with densities in excess of 1.9 x 10(11) wires per square centimeter. We found markedly enhanced coercivities with ferromagnetic cobalt nanowires that point toward a route to ultrahigh-density storage media. The copolymer approach described is practical, parallel, compatible with current lithographic processes, and amenable to multilayered device fabrication.

Single-junction polymer solar cells with high efficiency and photovoltage

Abstract: Organic solar cells with efficiency greater than 10% are fabricated by incorporating a semiconductor polymer with a deepened valence energy level. Polymer solar cells are an exciting class of next-generation photovoltaics, because they hold promise for the realization of mechanically flexible, lightweight, large-area devices that can be fabricated by room-temperature solution processing1,2. High power conversion efficiencies of ∼10% have already been reported in tandem polymer solar cells3. Here, we report that similar efficiencies are achievable in single-junction devices by reducing the tail state density below the conduction band of the electron acceptor in a high-performance photoactive layer made from a newly developed semiconducting polymer with a deepened valence energy level. Control over band tailing is realized through changes in the composition of the active layer and the structure order of the blend, both of which are known to be important factors in cell operation4,5,6. The approach yields cells with high power conversion efficiencies (∼9.94% certified) and enhanced photovoltage.

Controlling Polymer-Surface Interactions with Random Copolymer Brushes

Abstract: A simple technique for precisely controlling the interfacial energies and wetting behavior of polymers in contact with solid surfaces is described. End-functionalized statistical random copolymers of styrene and methylmethacrylate were synthesized, with the styrene fraction f varying from 0 to 1, and were end-grafted onto silicon substrates to create random copolymer brushes about 5 nanometers thick. For f < 0.7, polystyrene (PS) films (20 nanometers thick) rapidly dewet from the brushes when heated well above the glass transition temperature. The contact angle of the resulting polymer droplets increased monotonically with decreasing f . Similar behavior was observed for poly(methylmethacrylate) (PMMA) films but with an opposite dependence on f . The interfacial energies of the random copolymer brushes with PS and PMMA were equal when f was about 0.6. Thus, precise control of the relative surface affinities of PS and PMMA was possible, demonstrating a way to manipulate polymer-surface interactions.

Self-assembly of nanoparticles into structured spherical and network aggregates

Abstract: Multi-scale ordering of materials is central for the application of molecular systems in macroscopic devices. Self-assembly based on selective control of non-covalent interactions provides a powerful tool for the creation of structured systems at a molecular level, and application of this methodology to macromolecular systems provides a means for extending such structures to macroscopic length scale. Monolayer-functionalized nanoparticles can be made with a wide variety of metallic and non-metallic cores, providing a versatile building block for such approaches. Here we present a polymer-mediated 'bricks and mortar' strategy for the ordering of nanoparticles into structured assemblies. This methodology allows monolayer-protected gold particles to self-assemble into structured aggregates while thermally controlling their size and morphology. Using 2-nm gold particles as building blocks, we show that spherical aggregates of size 97 +/- 17 nm can be produced at 23 degrees C, and that 0.5-1 microm spherical assemblies with (5-40) x 10(5) individual subunits form at -20 degrees C. Intriguingly, extended networks of approximately 50-nm subunits are formed at 10 degrees C, illustrating the potential of our approach for the formation of diverse structural motifs such as wires and rods. These findings demonstrate that the assembly process provides control over the resulting aggregates, while the modularity of the 'bricks and mortar' approach allows combinatorial control over the constituents, providing a versatile route to new materials systems.

I and i

Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

Gold nanoparticles: assembly, supramolecular chemistry, quantum-size-related properties, and applications toward biology, catalysis, and nanotechnology.

Abstract: Although gold is the subject of one of the most ancient themes of investigation in science, its renaissance now leads to an exponentially increasing number of publications, especially in the context of emerging nanoscience and nanotechnology with nanoparticles and self-assembled monolayers (SAMs). We will limit the present review to gold nanoparticles (AuNPs), also called gold colloids. AuNPs are the most stable metal nanoparticles, and they present fascinating aspects such as their assembly of multiple types involving materials science, the behavior of the individual particles, size-related electronic, magnetic and optical properties (quantum size effect), and their applications to catalysis and biology. Their promises are in these fields as well as in the bottom-up approach of nanotechnology, and they will be key materials and building block in the 21st century. Whereas the extraction of gold started in the 5th millennium B.C. near Varna (Bulgaria) and reached 10 tons per year in Egypt around 1200-1300 B.C. when the marvelous statue of Touthankamon was constructed, it is probable that “soluble” gold appeared around the 5th or 4th century B.C. in Egypt and China. In antiquity, materials were used in an ecological sense for both aesthetic and curative purposes. Colloidal gold was used to make ruby glass 293 Chem. Rev. 2004, 104, 293−346

Phd by thesis

Abstract: Deposits of clastic carbonate-dominated (calciclastic) sedimentary slope systems in the rock record have been identified mostly as linearly-consistent carbonate apron deposits, even though most ancient clastic carbonate slope deposits fit the submarine fan systems better. Calciclastic submarine fans are consequently rarely described and are poorly understood. Subsequently, very little is known especially in mud-dominated calciclastic submarine fan systems. Presented in this study are a sedimentological core and petrographic characterisation of samples from eleven boreholes from the Lower Carboniferous of Bowland Basin (Northwest England) that reveals a >250 m thick calciturbidite complex deposited in a calciclastic submarine fan setting. Seven facies are recognised from core and thin section characterisation and are grouped into three carbonate turbidite sequences. They include: 1) Calciturbidites, comprising mostly of highto low-density, wavy-laminated bioclast-rich facies; 2) low-density densite mudstones which are characterised by planar laminated and unlaminated muddominated facies; and 3) Calcidebrites which are muddy or hyper-concentrated debrisflow deposits occurring as poorly-sorted, chaotic, mud-supported floatstones. These

Mussel-Inspired Surface Chemistry for Multifunctional Coatings

Abstract: We report a method to form multifunctional polymer coatings through simple dip-coating of objects in an aqueous solution of dopamine. Inspired by the composition of adhesive proteins in mussels, we used dopamine self-polymerization to form thin, surface-adherent polydopamine films onto a wide range of inorganic and organic materials, including noble metals, oxides, polymers, semiconductors, and ceramics. Secondary reactions can be used to create a variety of ad-layers, including self-assembled monolayers through deposition of long-chain molecular building blocks, metal films by electroless metallization, and bioinert and bioactive surfaces via grafting of macromolecules.

Science and technology for water purification in the coming decades

Abstract: One of the most pervasive problems afflicting people throughout the world is inadequate access to clean water and sanitation. Problems with water are expected to grow worse in the coming decades, with water scarcity occurring globally, even in regions currently considered water-rich. Addressing these problems calls out for a tremendous amount of research to be conducted to identify robust new methods of purifying water at lower cost and with less energy, while at the same time minimizing the use of chemicals and impact on the environment. Here we highlight some of the science and technology being developed to improve the disinfection and decontamination of water, as well as efforts to increase water supplies through the safe re-use of wastewater and efficient desalination of sea and brackish water.